Used Scheer Db 5 for sale (67)

Condition: used, Cutting length 6.100 mm length ~ 7.260 mm Dcjdpoy Nn Dcsfx Ac Neg width ~ 1.230 mm mm height ~ 1.550 mm mm Veneer saw or jointing and fine-cutting machine Scheer FM6-6100A for sawing veneer or other thin panels with automatic feed and integrated suction.

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Milling Device FG 314-2 Dodpfsx R Efgex Ac Necg - Equipped with HM /18 Scheer router - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight: approx. 21 kg - 2000 Watts - 7 kg torque - 10,000 – 18,000 rpm Transport available at additional cost!

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Dedjyu Sl Topfx Ac Necg

Condition: new, functionality: fully functional, Cutting rotor for a strand pelletizer Manufacturer: MAAG / Scheer - Cutting rotor width: 200 mm Dcsdepgulwjpfx Ac Nsg - Excellent condition

Condition: used, Cutting length: 3000 mm Cutting height: adjustable 0 - 45 mm Saw unit: 1.8 kW Storage location: Nattheim Dcodpfx Ajy Hrzaoc Nsg

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Storage location: Nattheim Dodpfxevvkazs Ac Nocg

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Dodpfx Acsvvkblo Nscg Storage location: Nattheim

Condition: used, Cutting length: 3050 mm Workpiece clamping: handwheel Dcodem H Uxyepfx Ac Neg Extraction system: yes

Condition: used, Year of construction: 1975, Number of spindles: 20 Drill spacing: 32 mm Dcodpfxjy E Hfke Ac Nsg Power consumption: 1.8 kW

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer stacks, chipboard, MDF, and thin solid wood. Features fully automatic feed and return of the saw carriage. Feed rate, saw blade height, and cutting lengths are continuously adjustable. Equipped with pneumatic special pressure beam, front and rear support tables HP 520. Allows both longitudinal and cross cuts in a single operation. Three-phase brake motor 6.8 HP / 5 kW and scoring unit. Efficient dust extraction. Maximum cutting height 60 mm, cutting length 3,100 mm. In good condition; machine is ready for immediate use. For further technical details, please refer to the PDF (brochure). Located in Neustadt/Weinstr. Transport available at extra cost! Dcedpfx Aeyzxkwjc Njg

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Dcsdpfjyy St Aox Ac Njg Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Dcjdpfohfmrtjx Ac Nsg Year of manufacture: 2008 Scheer SGS 100-E4 Condition: good, functional tested Available immediately

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Djdpfx Aoyxr T Tsc Necg Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, machine/vehicle number: 650597, Motor 1,65 kW cutting length approx. 2450 mm saw blade diameter approx. 150 mm Dcsdpfjimd D Asx Ac Nsg pneumatic tension space requirement approx. LxWxH mm 3000 x 1000 x 1600 ex location Seevetal, subject to prior sale, sold as seen, without transport

Condition: good (used), Year of construction: 1984, functionality: fully functional, Veneer Saw Scheer FM8-3100 Year of manufacture: 1984 Pneumatic tensioning Cutting length: 3100 mm Max. cutting height: 45 mm Dimensions: 3.8 x 0.7 x 1.15 m Dcsdoyvg D Uepfx Ac Njg Weight: approx. 400 kg

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW machine weight ab. 500 kg Dcjdoyku U Nopfx Ac Nog

Condition: used, Used machine Equipment: - Cutting length 2500 mm - With handwheel tensioning Dsdpfx Acjyncpis Necg Availability: short-term Stock location: 63934 Röllbach

Condition: used, Year of construction: 1991, Cutting length 3100 mm Cutting height 45 mm Motor output 1,8 kW Dodpfjr I E Hcjx Ac Necg dimensions 4000 x 500 x 920 mm weight 450 kg

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm Dcjdpfxeh Elzte Ac Nsg -Dimensions: 265/270/H255 mm -Weight: 24 kg

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Workpiece clamping: pneumatic Dodpfx Acjyl Tiuj Nocg

Condition: ready for operation (used), A panel dividing saw Scheer & Cie is available. Cutting length: 4200mm, fence depth: 4250mm, table length: 4200mm, max. cutting height: 70mm, height levels: 3, feed rate: 40m/min, return speed: 50m/min, angular pressure device: 2400mm, air cushion tables: 3, air cushion table dimensions X/Y: 1720mm/800mm, clamping fingers: 7, saw motor power: 9kW, control: Siemens PLC, system: Linux Ubuntu with graphical interface. Including adjustable scoring saw, residual cut device, safety devices, remote maintenance, optimization program Optimax and freely adjustable labels that are printed during sawing. Documentation available. An on site inspection is possible. Dcodpsyq R E Refx Ac Nsg

Condition: used, Number of boring spindles 1 St. Motor output 1,1 kW Workpiece thickness ca. 100 mm Working width 650 mm Dedelfcnwopfx Ac Necg Foot-operated drill machine Scheer type BM340

Condition: ready for operation (used), Year of construction: 1989, cutting length (max.): 3,100 mm, Pneumatic pressure beam; rear stop Dedpeyn Nr Dsfx Ac Nocg

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW Dodpfx Ajb A Iiaec Njcg -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction Dcjdpob A Hnhsfx Ac Neg