Used Schuitemaker Amigo 20 for sale (80,834)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 10866888, type of input current: three-phase, filter area: 1,087 m², volume flow: 37,000 m³/h, intake manifold diameter: 600 mm, nominal flow rate: 37,000 m³/h, overall weight: 5,850 kg, total width: 4,500 mm, total length: 6,500 mm, total height: 5,785 mm, input voltage: 380 V, noise level: 82 dB, compressed air connection: 6 bar, nominal power: 60 kW (81.58 HP), extraction nozzle diameter: 630 mm, suction capacity: 37,000 m³/h, input current: 55 A, input frequency: 50 Hz, space requirement width: 6,000 mm, space requirement length: 12,000 mm, space requirement height: 5,785 mm, sheet thickness aluminum (max.): 2 mm, inlet: 630 mm, control voltage: 380 V, Equipment: CE marking, Dust collector SCHUKO with Goldcone cartridge filter. 2 x 30 kW ventilators Still in use in our workshop in Brussels, BELGIUM, until we move to our new building in September 2026. Ltedpfexuftvox Ah Uea Only available in September 2026.

Condition: used, machine/vehicle number: 005939, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Max Panel Width: 1500 mm Max feed speed: 40 m/min Ltsdpjx Idxaefx Ah Uoa Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, Drum heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, heating drum -Handover: in the current condition as viewed -Connection cable: damaged, see photos -Drum heater: Type designation 1082 105 BHT 932 07/20 -Shaft: Ø 40 x 40 mm -Dimensions: Ø 180 x 760 mm Ltodpfx Ahjxm Rptj Usa -Weight: 49 kg

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, Travel (X/Y/Z): 2,700 x 1,600 x 900 mm Table size: 2,400 x 1,200 mm Milling spindle: Hiteco (5,000-36,000 rpm) Tool changer: 12 positions Control system: Siemens Sinumerik 840D with additional HT2 hand-held unit Lsdpfsxuxgpex Ah Uota Vacuum pump: 70 m³/h Machine operating hours: approx. 2,000 h Spindle hours: approx. 300 h Equipment: Chip pre-filter with electronic pressure monitoring, rotary encoder for thread cutting, mist lubrication system, funnel head extraction, tool breakage monitoring, machine enclosure

Condition: excellent (used), mileage: 297,766 km, power: 130 kW (176.75 HP), first registration: 04/2018, fuel type: diesel, tire size: 205/75R16, axle configuration: 4x2, wheelbase: 3,640 mm, fuel tank capacity: 85 l, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 3,640 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, navigation system, power assisted steering, soot filter, traction control, General information Number of doors: 4 Technical information Number of cylinders: 4 Engine capacity: 1.968 cc Drivetrain AdBlue system: Yes Transmission Transmission: 8 gears, Automatic Axle configuration Tyre size: 205/75R16 Brakes: disc brakes Front axle: Max. axle load: 2100 kg; Steering; Tyre profile left: 10%; Tyre profile right: 10%; Suspension: coil spring suspension Rear axle: Max. axle load: 2100 kg; Tyre profile left: 10%; Tyre profile right: 10%; Suspension: leaf suspension Measures Dimensions (LxBxH): 632 x 221 x 296 cm Weights Empty weight: 2.904 kg Carrying capacity: 596 kg GVW: 3.500 kg Max. towing weight: 2.500 kg (unbraked 750 kg) Functional Ltsdpfoxpn Aisx Ah Usa Cooling: -20 °C to 20 °C Make of bodywork: VEDECAR Xarios 350 Cooling engine: diesel and electric Wall thickness: 10 mm Interior Interior: black History Service history: Present Condition Technical condition: very good Visual appearance: very good Damages: none Number of keys: 1 Other information Cool unit make: Carrier Additional information Please contact Moussa or Youssef for more information Video: Very neat MAN TGE 3.180 Refrigerated truck with standby 230V Carrier Xarios 350 +20/-20 (can cool and heat) DSG Automatic Year of construction 2018 / EURO6 Data recorder / ATP certificate available inspected until 12-2024 296,000 KM very good condition, cooling works perfectly Cool unit brand: Carrier

Condition: used, container length: 20 ft, color: grey, 2 used containers, for storage, one fully complete with side door, second incomplete Ledpfx Aoxfcwyjh Ueta Price for both

Condition: ready for operation (used), Year of construction: 1998, operating hours: 41,843 h, Turret Number of tool slots 15 Rotating tools Yes Additional Equipment Automatic Shutdown System: 10 kg CO2 cylinder This TORNOS DECO 2000/20 was manufactured in 1998. A robust Swiss type turning machine, it features a bar passage of 25.4mm and can handle up to 21 fixed and 15 rotating tools. It includes an IEMCA loader and a conveyor system, enhancing its operational efficiency. Consider the opportunity to buy this TORNOS DECO 2000/20 Swiss type turning machine. Contact us for more information about this machine. Application Types Ltsdpfxex D Sx Do Ah Uja Turning

Condition: used, machine/vehicle number: 008324, Max. panel width: 1000 mm Max. panel length: 2500 mm Length of conveyor: 7000 mm Ltjdpfxsx Hpkrj Ah Uja Panel return for edgebander: Right

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 12500094 0004, Temperature control device for plastic injection molding applications and industrial applications up to 300 °C. Technical specifications: Voltage: 400 V Power: 45.6 kW Circuit diagram No. 40014 Current: 71 A Volume: 24 liters Flow temperature: 300 °C Frequency: 50 Hz Dimensions: 140x60x135 cm Total weight: 60 kg The Regloplas temperature control device model 300LD/20/FM65/1K/RT50 is a state-of-the-art solution for precise temperature control in industrial applications. With a temperature range of up to 50 °C, this device enables reliable and efficient control of process heat. It is ideal for tempering tools, molds and machines to improve product quality and shorten production times. The user-friendly control system makes it easy to operate and adjust settings, while the robust design guarantees durability and reliability. Ltsdpfx Ahsvcp Uke Uja Thanks to its compact design, the device can be easily integrated into existing production environments.

Condition: new, sheet thickness: 20bending length: 3100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Ltodpfsd Ab Rvox Ah Usa Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 470 x 470 mm, 20 plates, open spout, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 84 liters, filter surface 7m², dimensions 2300 x 800 x 1200 mm, weight 850 kg, hand or motor hydraulics, drip tray, filtrate, with or without filter cloths Ltedpfxsfbbpke Ah Usa

Condition: used, Lead pressure measuring device Ledpfx Ahecrp Srj Ujta Make Tesa Type TF WZ 1 No.20 in wooden case

Condition: used, Technical details: width: 500 mm depth: 260 mm height: 795 mm Lodpfxsu S H Nlj Ah Ujta weight of the machine ca.: 320 pro Stück kg 2 pieces available (price per piece) without T-slots Foot clamping slotted hole Ø 39 x 130 mm *

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Ltsdpfoxxal Ijx Ah Uea Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: excellent (used), functionality: fully functional, Sanomat Amigo Features: Manual portioning via extra-large, robust button at the outlet On/off switch for device/cooling Intensive container cooling Disinfection cleaning using rinsing procedure Free accessories (tools, brushes, seals, and cleaning nozzle) Capacity: 1.5 liters Ltodpfsxmq Uvsx Ah Uea Connection: 230V Dimensions: 228 x 315 x 422 mm (W x H x D) Processes up to 60 liters of liquid cream per hour Used unit, cleaned Visit us!

Condition: new, bending length: 4100sheet thickness: 20upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table Euro - oil coiler STD. - center support EURO 13.600,-- - side supports EURO 15.400,-- We have many references! Lsdpfx Ahed Ab Sre Uota

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head Ljdpfx Aoxc T Rleh Ujta -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg

Condition: excellent (used), Pull-down clamp Make AMF type 6490-18/20 Ltedpfoln Umbox Ah Usa height 25 mm width 50 mm for screws M 16 7 pieces available

Condition: used, Year of construction: 2004, Technical details: current capacity: 630 kVA Voltage primary: 20 kV Voltage secundary: 400 V frequency: 50 Hz voltage: 400 V / Hz rated current: 18,2/24,2 A weight: 2,6 pro Gerät t dimensions L x W x H: 1,7 x 0,82 x 1,66 m This isn't a medium voltage plant! Protection class IP 00 Cooling type AN insulation class F - F with interior insulation Winding material Al / Al Ambient temperature = 40° C Application Rated voltage: Lsdpsv Szwcefx Ah Ujta 1. 21.000 V 2. 20.500 V 3. 20.000 V 4. 19.500 V 5. 19.000 V *

Condition: used, machine/vehicle number: 007998, Max. panel width: 1900 mm Max. panel length: 2700 mm Lodpjw Idacjfx Ah Ueta Max. forward feed speed: 30 m/min

Condition: used, Year of construction: 2023, tank 1.300 l Pressure of pump 8 / 20 / 80 bar control Schütze / Contactors total power requirement 18,4 kVA weight of the machine ca. 1,2 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BFU 1300 S/80/20/8+ Z/K - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 4 - Pump capacity: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C -,- kW, 3,447 rpm, 2.3 m³/h, 38.3 l/min, pressure 25 bar, max. temperature 90°C 2.2 kW, 2,899 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Ljdpswgd Irsfx Ah Ujta Technical Data (Motor): - 1,350 rpm - 0.12 kW - incl. centrifuge (Ruma MZ 35) Technical Data: - Rotor speed: 4,615 rpm - Rotor diameter: 230 mm - Temperature (min/max): 10 - 50 °C - Flow rate (min/max): 10 - 35 l/min - Max. solids quantity: 6 kg - Rated power: 2 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: new, sheet length: 2600sheet thickness: 20upper roll diameter: 330 Technical specifications: - Hardened and polished rolls Lsdpfx Aed Ab S Njh Ueta - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.200.00 We have many references!

Condition: new, sheet thickness: 20bending length: 2100upper roll diameter: 300 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation  - metarial feeding table  - oil coiler  - center support  - side supports  Lsdpsd Ab R Nofx Ah Uota - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, bending length: 3100sheet thickness: 20upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: Ltedjd Ab S Aepfx Ah Uea - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.400.00 We have many references!

Condition: new, bending length: 2100sheet thickness: 20upper roll diameter: 300 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine Lodpfsd Ab Taox Ah Ujta - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 8.400.00 We have many references!