Used Scm Edge Bander for sale (656)

Condition: used, machine/vehicle number: G-KR114450H, SCM panel saw, good condition, 5.5 kW, approx. 700 kg Nlsdpfsvw Ec Hjx Ah Seh Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Multi-spindle drilling machine SCM Type FM 29/S 29 spindles Distance 32 mm Nedpfxsvxtfre Ah Solh Table 1200 x 780 mm Max drilling depth for vertical drilling 100 mm/ horizontal 60 mm Spindle speed 3800/min

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Nedpfsvyuqfsx Ah Selh

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Nodpfx Aeu U D N Ueh Selh

Condition: used, Ferwood Code: RU0001905 - Manufacturer Code: M75194500 - Condition: Used - Compatible Machine: SCM EDGE BANDING MACHINE - If interested we offer a revision service, contact us. Nljdevazk Eepfx Ah Soh

Condition: used, machine/vehicle number: AN004439, Anzahl Bohrspindeln : 2 Stk Teilung : 32 mm Bohreraufnahme : Schnellspannfutter Bohrerschaft: 10 mm Bedienung : Fußpedal Werkzeuge : Ja mm Bohrrichtung : von unten & stirnseitig max. Durchlasshöhe : 60 mm Anzahl Materialspanner : 2 Stk Art der Materialspannung : pneumatisch Nodpfx Aouuu Rkoh Solh Ausführung : stationär Anschlagsystem : für Lochreihe und Konstruktionsreihe Gewicht ca. : 300 kg Motorleistung : 2+3 PS

Condition: used, Wide belt sander SBF SATEFANI 2W126   - The machine in stock - Reconditioned - very good condition   TECHNICAL PARAMETERS :   - Maximum grinding width 1100 mm Nsdpecvwf Tjfx Ah Selh - The maximum height of the element 160 mm - The minimum amount of grinding 3 mm   - The main engines 2 x 11 kW - Engine feed 2.2 kW - Engines height adjustment 0,37 kW   - 1 rubber roller 65 shore with a diameter of 270 mm - 2 rubber roller 45 shore with a diameter of 400 mm   - Two types of feed speed - Pneumatic oscillation on krańcówkach - Nozzle diameter 2 x 150 mm - Tape in very good condition   Overall dimensions machine: - Length 280 cm - Width 180 cm - Height 250 cm - Weight ~ 3000 kg

Condition: excellent (used), SCM S52 thickness planer Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), Nlsdpjza Dg Hofx Ah Ssh electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, digital height display, 160mm dust extraction port, 5.5KW motor, quiet operation, machine in good condition.

Condition: excellent (used), SCM S 52 Thicknessing Machine Nlodpfx Ahoz I Ihte Sjh - Max. planing width 52 cm - Max. planing height 24 cm - Electric planing height adjustment - 4 standard knives - 4 feed speeds - Table roller In very good condition.

Condition: used, Year of construction: 2015, functionality: fully functional, input voltage: 400 V, input current: 59 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 170 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,380 mm, workpiece height (max.): 170 mm, number of axes: 5, number of slots in tool magazine: 26, total height: 2,300 mm, total length: 6,000 mm, total width: 2,100 mm, overall weight: 3,840 kg, table length: 3,300 mm, table width: 1,400 mm, Equipment: CE marking, documentation/manual, AUTHOR M200 CNC MACHINING CENTRE GENERAL FEATURES Panel passage: Nljdpfx Ahoz Eakbs Sjh 180 mm on H50 devices AXES SPEED: X = 90 m/min (with Pro-Speed safety device) X = 25 m/min (with Pro-Space safety device) Y = 90 m/min Z = 30 m/min MOTORIZED CHIP CONVEYOR PROGRAMMING SOFTWARE XILOG MAESTRO 3D – the new powerful software developed by SCM Group – is the software for programming MORBIDELLI’s machining centres. • Visualization in 3D graphic mode of the workpiece, geometries, machining operations, and worktable; • Available: shading mode with different shading levels, wireframe mode, rendering visualization, geometry visualization, and toolpath visualization (CAM); • Zoom function, general functions, and visual aid for the workpiece; • Sketching function for inputting geometries, thus creating drawings (CAD) with a preview. Serie 200 working area: 3050 X 1380, N. 1 LASER FOR EASY CUP POSITIONING, N. 1 GROUP 600 - PRISMA KT (11 KW - 18,000 RPM), N. 1 The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality, even with high material removal rates. Characterized by a specific configuration with axes rotating at 50°, the Prisma machining head offers several advantages over traditional 5-axis machining units, such as: • Full use of machining areas, both with 5 axes and with a vertical spindle. • Spindle overall dimensions are kept outside the working area. • Very streamlined spindle design in the case of horizontal machining. The machining head is equipped with an 11 KW “High Speed” electrospindle and has a centralized exhaust system with automatic activation/deactivation of airflow on the working units. Technical specifications: Routing unit with 5 interpolating axes Electro-spindle with HSK 63F quick-release tool holder Rotation speed: 600-18,000 rpm Right and left rotation Power: 11 KW at 16,000 rpm (on S1 duty) 15 KW inverter C-axis rotation = 640° B-axis rotation = 270° C-axis equipped with a TTS locking system (Total Torque System – patented by SCM) “For life” grease lubrication Liquid cooling with a heat exchanger PRESET FOR ANGULAR HEADS on PRISMA KT SPINDLE, N. 1 52.22.71 DRILLING UNIT F26L2 (14V-40X-40Y-L0/90), N. 1 Drilling unit equipped with vertical displacement on an independent Z axis. Technical features: • No. 14 independent VERTICAL spindles • No. 6 horizontal spindles in the X direction • No. 4 horizontal spindles in the Y direction • On/off pneumatic vertical stroke of any spindle: 60 mm • Bit attachment: 10 H7 • Max. bit length: 70 mm • Adjustable rotation speed from 2,000 to 8,000 rpm, controlled by an inverter • Motor power: 3 kW • Integrated blade with independent vertical displacement and 0-90° rotation • Blade diameter: 160 mm (max) Features: Number of tools on board: 16 (max) Max. tool diameter on board: 300 mm (3 axes) Max. tool diameter on board: 350 mm (5 axes) Centre-to-centre distance between positions: 85 mm Single tool weight on board: 8 kg (max) Total weight of tools installed: 48 kg (max) TOOL ROOM, 10 positions, on the right side, N. 1 52.21.97 250(108) M3/H 50(60) HZ - VACUUM PUMP, N. 1

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA10001621, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 3,086 mm, travel distance Y-axis: 2,185 mm, travel distance Z-axis: 150 mm, workpiece height (max.): 150 mm, number of slots in tool magazine: 20, controller manufacturer: SCM, overall weight: 2,550 kg, feed length X-axis: 3,770 mm, feed length Y-axis: 2,585 mm, feed length Z-axis: 250 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 9,500 W, nominal power (apparent): 29 kVA, number of spindles: 1, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,500 rpm, tool diameter: 160 mm, tool length: 160 mm, distance between spindles: 32 mm, Equipment: chip conveyor, documentation/manual, SCM MORBIDELLI N100 22-31 C – CNC Milling and Drilling Machining Center Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001621 Year of Production: 2019 Condition: Excellent Location: Croatia Technical Specifications: Working Area (X x Y x Z): 3086 x 2185 x 150 mm Nlsdewtdt Ujpfx Ah Ssh Vacuum Table: High Efficiency Multipurpose Aluminum Table (HE) Vertical Drilling Head: 12 Spindles (7X / 5Y), 8000 rpm Horizontal Drilling: 3 Units (2X + 1Y), 8000 rpm Integrated Saw (X-Axis): Ø125 mm, 10000 rpm Main Milling Spindle: 9.5 kW (13 HP), HSK 63F, 24000 rpm Tool changer: 20 positions (19 at the rear + 1 in the cabin for quick change) Vacuum pumps: 2 x 250/300 m³/h Dust extraction: 5300 m³/h + 3400 m³/h for unloading pusher, Ø250 mm Machine weight: approx. 2550 kg Total installed power: 23–28.5 kW Control and software: Control via Xilog Maestro system + Eye-M PRO console Industrial computer with Windows Embedded 7 operating system 21.5" touch screen Included nesting optimization module and additional software licenses Built-in accessories: 1. Automatic tool length measuring device 2. TECPAD remote control with 7” touch screen 3. Lateral pick-up for additional tools 4. F18L doweling machine with RO-AX system 5. Two-field positioning for work in two working zones (A + D) 6. Automatic central lubrication 7. Air blowing and micro-lubrication system for processing demanding materials (e.g. aluminum panels) 8. Vacuum cup set 9. Automated unloading system: pusher + conveyor belt 10. Predisposition for automatic loading device 11. Interpolating vector axis with digital control for the 4th axis The machine has been used exclusively in professional conditions, regularly maintained and fully functional. Ready for immediate use in industrial production.

Condition: used, functionality: fully functional, total width: 1,280 mm, total height: 1,920 mm, total length: 1,560 mm, working width: 900 mm, overall weight: 1,100 kg, type of input current: three-phase, input voltage: 400 V, SCM Sandya Uno Wide Belt Sander Nodpfx Ahjzvfb Nj Solh Working width: 900 mm Working height: 3–160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with pad Main motor power: 11 kW Pneumatic oscillation Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Machine dimensions: 1560 x 1280 x 1920 mm Weight: approx. 1100 kg

Condition: used, SCM S 630 Heavy-duty thickness planer – for carpentry and timber framing Planing width 630 mm Nlsdoz Ay Ttepfx Ah Ssh Planing height 300 mm 4-knife safety cutterhead with automatic brake / indicator light Segmented pressure beam – aluminum Grooved steel roller at the infeed Rubber rollers at the outfeed Undertable rollers 7.5 kW main motor Electronic thickness table adjustment – digital/LED Infinitely variable feed rate 6-20 m/min Machine from a vocational training workshop in TOP condition Available from stock in Lieboch

Condition: used, Year of construction: 1985, Dimensions of the thickness planer table (L x W): 500 x 800 mm Overall length of the surfacing tables: 2,200 mm Working width: 500 mm Njdpfx Asz Agd Seh Sslh Maximum material removal: 8 mm Working height min./max.: 3 / 235 mm Feed rates: 7.5 / 15 m/min Cutterhead diameter: 120 / 4 mm/knife + 2 scoring knives Rotational speed: 5,000 min-1 Motor power: 5.5 kW Manual thickness planer table adjustment via handwheel Setting gauge

Condition: good (used), C.E. Nedozn I Hfjpfx Ah Sjlh

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 Njdpfx Ahozmfg Tj Sjlh SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Nodpsw Iddzjfx Ah Selh Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, workpiece height (max.): 120 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Installed total power: 5 kW Motor power: 4 kW Nlodpfsxw U Nxex Ah Seh Saw spindle: bottom EQUIPMENT CE marking

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Nledowqdbmjpfx Ah Ssh Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008473, X axis working area: 5000 mm Y axis working area: 1640 mm Working Table: Pod and Rail Nledjywaf Ispfx Ah Ssh Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 10 Total number of tool changer positions: 36

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, rotational speed (max.): 8,000 rpm, shaft length: 145 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Router unit Number of motors: 1 Shaft length: 145 mm Motor power: 4 kW Speed: 8,000 rpm Nedsxxar Ujpfx Ah Solh MACHINE DETAILS Installed total power: 5 kW Motor power: 3 kW

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Nledoy Dq Iaspfx Ah Soh Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, Year of construction: 2000, SCM Tech 99L Work Center Nedpfjtxdqcjx Ah Selh Year of production: 2000 Dimensions and weight for transport: mm 4.800x 230 h. 260 peso Kg. 2800

Condition: used, Four-side planer SCM P4F Specifications: - Condition: used - Manufacturer: SCM Nsdpfx Aowzyfieh Sslh - Model: P4F - Working width: 180 mm - Working height: 120 mm - Machine connected power: 12.5 kW - Star-delta start - Cutterhead rotation: 6,000 rpm - Electric planing height adjustment - Manual planing width adjustment - Machine equipped with a set of heads - Infeed table length: 230 cm, width: 18.5 cm - 2 feed speeds (6 and 12 m/min) - Spring-loaded feed roller pressure - Sheet metal soundproofing enclosure - Original paintwork - Extraction socket: 4 x 120 mm - Weight: approx. 1,200 kg - Overall dimensions: 330 x 110 x 130 cm (L x W x H) - No. of machines available: 2 Additional information: - The photos show the actual condition of the item for sale

Condition: excellent (used), functionality: fully functional, two bottom heads one side - right head heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads Nedpfx Aez D Acwsh Sslh right/left spindles