Used Scm S 520 for sale (652)

Condition: excellent (used), SCM S 52 Thicknessing Machine - Max. planing width 52 cm - Max. planing height 24 cm Bodpfx Ajz I Ihtjdhelp - Electric planing height adjustment - 4 standard knives - 4 feed speeds - Table roller In very good condition.

Condition: used, Year of construction: 2013, machine/vehicle number: A1 /000149, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 13,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, workpiece length (max.): 13,600 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, workpiece weight (max.): 2,600 kg, number of axes: 8, number of slots in tool magazine: 11, controller manufacturer: osai, actuation type: electric, total height: 3,500 mm, total length: 31,000 mm, total width: 6,500 mm, overall weight: 18,000 kg, table length: 13,600 mm, table width: 1,250 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Cutting center for glulam beams, solid wood beams, and X-lam panels with a width of 1250. Machine equipped with software for converting files into BTL language. Designation: FORA CNC Milling Machine Brand: SCM ROUTECH Model: OIKOS 12 Type: OIKOS12 HT Serial number: A1/000149 Year of manufacture: 2013 Weight: 18000 kg Rated voltage: 400 V Number of phases: 3 Rated current: 63 A Frequency: 50 Hz Bledpjz Hcp Aofx Adhop Reference: 3-577 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper Blsdpezvb Uxjfx Adhsp * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, Year of construction: 2001, Number of belts: 2 pcs. Max. working width: 1100 mm Min. working height: 4 mm Max. working height: 170 mm 1st belt: Calibrating roller Abrasive belt length, 1st unit: 1900 mm Abrasive belt width, 1st unit: 1115 mm 2nd belt: Combination unit Abrasive belt length, 2nd unit: 1900 mm Abrasive belt width, 2nd unit: 1115 mm Material thickness measuring device: Yes Fixed feed rate: 4.5/9 m/min Control: Hand-operated control panel Belt oscillation: Yes Infeed height: Variable (lower table moves) Table stroke: Electro-motorized Table display: Digital Operating pressure: 6 bar Approximate weight: 1207 kg Motor power: 15 kW Bjdpfx Adez R Duvjhslp Dust extraction diameter: 2x160 mm Location:

Condition: excellent (used), Year of construction: 2010, -max.width-240mm Bjdpfx Adjz Rnlfjhjlp -work heads 4+1

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: AA1/014223, functionality: fully functional, input voltage: 400 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,970 mm, travel distance Y-axis: 1,725 mm, travel distance Z-axis: 340 mm, workpiece length (max.): 2,690 mm, workpiece width (max.): 1,240 mm, number of axes: 3, number of slots in tool magazine: 8, controller manufacturer: ESA GV - XILOS PLUS, actuation type: electric, total height: 2,897 mm, total length: 3,800 mm, total width: 2,400 mm, overall weight: 2,600 kg, table length: 2,740 mm, table width: 1,255 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, SCM Pratix 48 NST CNC machining centre for drilling and routing, year 2004, from the closure of a small, artisanal woodworking shop (no heavy industrial shift production). Machine in excellent condition, stored indoors, inspected and serviced by an official SCM technician. TECHNICAL SPECIFICATIONS: Working area: X = 2,690 mm | Y = 1,240 mm Axis travels: X = 2,970 mm | Y = 1,725 mm | Z = 340 mm Workpiece clearance: 200 mm Multifunctional grooved aluminium table with integrated vacuum channels (vacuum hole pitch 120 mm, groove pitch 40 mm) Pneumatic pop-up reference stops controlled by CNC SCM Power 2000 electrospindle 7.5 kW (10 HP), HSK 63F tool connection, rotation speed up to 18,000 RPM Automatic rear tool changer: Rapid, 8 positions F9 boring unit: 5 independent vertical spindles + 4 horizontal spindles (1+1 in X and 1+1 in Y) Upgraded 250 m³/h vacuum pump mounted on a mobile trolley CNC control unit: PC-Office running Windows XP with SCM Xilog Plus software interface INCLUDED ACCESSORIES & TOOLING: Original SCM right-angle attachment head with 2 horizontal outlets (for router bits with ER32 collet or saw blade up to Ø 160 mm), 360° manually adjustable Set of HSK 63F tool holders, ER32 clamping nuts, and service wrenches Extensive set of professional OMAS profile cutters and tooling for doors, windows, and solid wood joinery Modulset modular vacuum template clamping elements (H=20 mm) Original SCM user & maintenance manuals, electrical/pneumatic schematics, and original CE Declaration of Conformity Bjdpfx Ado Af Ig Ueholp TERMS OF SALE & DELIVERY: Delivery terms: Ex Works (EXW). Dismantling, packing, loading, and transportation are entirely the buyer's responsibility and at their expense. The machine is installed and can be inspected on site under power by agreement. PLEASE NOTE: Machine fully inspected, software/hardware reset, and functionally tested by an official SCM service technician, with an official service report and complete system backup available.

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Bjdpfx Adjzc Ilxshelp

Condition: like new (used), Year of construction: 2022, machine/vehicle number: AA 10005475, functionality: fully functional, operating hours: 2,540 h, number of axes: 5, overall weight: 5,725 kg, Work table and workpiece clamping: 8 TV FLEX rails, length 1,600 mm 8 lifting devices for 1,600-mm rails 24 fixed vacuum supports, 145 × 145 mm, H = 75 mm 8 rotatable vacuum supports, 180 × 65 mm, H = 75 mm Front stops, H = 75 mm Bedpfx Adjz R Rgmjholp Additional front stops, H = 75 mm Double, removable central reference stop with 6 stops, H = 75 mm Working area X: 5510 mm Working area Y: 1620 mm Workpiece passage Z: 250 mm Vector speed X-Y axes: 78 m/min (ProSpeed) Machining units: 5-axis machining unit DIRECT 5 JQX: 13.5 kW with liquid cooling 3-way positionable extraction hood Drilling unit F23 L RO AX: 13 independent vertical spindles 10 horizontal spindles (6 in X and 4 in Y direction) Integrated slot cutter in X direction Drilling unit OF0480: With pneumatic vertical positioning (single Z-axis) Drilling unit with additional frequency inverter Device for increasing the drilling pressure in the Z direction Preparation for Hiteco units with 1 pneumatic interface Tool length measuring system Linear tool changer magazine TRB14: Arranged on the side with 14 tool positions Suitable for milling cutters and, depending on the configuration, larger tools or angular heads Moving linear quick-change magazine FAST 14: With 14 tool positions, designed for short tool change times and high machining efficiency Vacuum pump: 250/300 m³/h; 50/60 Hz Control and software: SCM Maestro Connect Maestro Active, Human Machine Interface (HMI) Maestro CNC Hardware key for Maestro CNC Basic Additional key for Xilog Maestro (USB) Operating system: Windows 10 Embedded 64 Bit Control panel with integrated EYE-M PRO PC Chip disposal: Chip extraction mat 5510 mm; mobile chip container at the end of the machine bed Electrical connection: 400 V - 50 Hz

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Bjdpfx Aovvi I Redhelp

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 Bsdpfx Adozuzfhehslp - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Bledpfx Ajzcmcvsdhjp Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece length (max.): 2,480 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, table length: 2,480 mm, table width: 1,250 mm, CNC – MORBIDELLI UNIVERSAL 2412 TV (SCM Group) Technical specifications: Machine dimensions: approx. 4320 x 1800 x 2100 mm Machine weight: 2100 kg Working range of X-axis: 2480 mm Working range of Y-axis: 1250 mm Z-axis stroke: 150 mm Maximum workpiece thickness: 80 mm X/Y axis speed: up to 78 m/min Z-axis speed: up to 24 m/min Power supply: 3 x 400 V / 50–60 Hz Total installed power: 16.5 kW Rated current: 29 A Operating pressure: minimum 7 bar Compressed air consumption: 100–200 NL/min Drilling unit: - 12 vertical spindles - 6 horizontal spindles (2+2 in the X-axis and 1+1 in the Y-axis) + integrated grooving saw in the X-axis. Milling spindle: - power: 6.6 - 7.5 kW - speed: 1500-24000 rpm - clamping system: HSK 63F - tool rack with 10 positions Beam-type work table: 6 beams Software: Xilog Plus + PanelMac Windows XP Additional equipment: Suction cups Light curtain safety gate Vacuum pump 90 m3/hour Features: Suitable for MDF, chipboard, and solid wood Robust and reliable construction. Bodpfj Aduqaex Adholp Easy operation and maintenance. The machine is suitable for small to medium-sized production facilities. Inspection and testing on site are available. The machine is in good technical condition and has been regularly maintained.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Blsdpovvi N Iefx Adhep

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Bsdevwbp Aopfx Adhjlp

Condition: used, Year of construction: 2016, We are offering this used SCM STARTECH CN drilling machine, manufactured in 2016. Year of manufacture: 2016 Serial number: AB/226922 Type: F004 Model: STARTECH CN Bsdpfx Adjz Afdkjhslp The advertised price is €14,500 net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2003, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planing width: 230 mm, overall weight: 3,000 kg, number of spindles: 5, Planing and Moulding Machine / Four-Sided Planer Manufacturer: SCM Model: Superset XL Year of manufacture: 2003 Planing machine with 5 spindles (bottom-right-left-top-universal), previously used in a parquet production facility. Working width: 230 mm Working height: 120 mm Bedpjz N Amzefx Adholp Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Right Left Top Universal spindle Weight approx. 3000 kg

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Bedpfxezulxfo Adhjlp Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Sanding width: 1,650 mm Bedszx R Dnspfx Adholp Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, right-hand fence with motorized adjustment up to 1500mm, Bedpfx As Ahm R Todhjlp 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 18 A, input frequency: 60 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,500 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 5,000 rpm, total length: 7,250 mm, total width: 4,460 mm, total height: 1,770 mm, overall weight: 923 kg, table height: 900 mm, Equipment: documentation/manual, saw blade guard, scorer, • Electronically programmable circular panel saw for professional woodworking, combining the highest precision and user-friendliness. • Sliding table with aluminum roller table and hardened precision guides for consistently accurate cuts. • Flexibility: Manual, semi-automatic, and fully automatic operation possible. Bljdpszvd T Dofx Adhep • Rip fence carriage with CompeX device, anodized aluminum profile with guide made of hardened, ground, and dovetailed steel guides. • Scoring unit with independent motorization, adjustable from the outside, and stops for easy saw blade positioning. • “SCM Thundercut” optimizer/sequencing control app for tablets. • Electronic 2-axis control: Vertical adjustment and tilting of the saw unit. • Eccentric clamping device. • Electronic display of the parallel fence position.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Planer and groover / four-sided planer Manufacturer: SCM Type: Superset XL Year of manufacture: 2006 Planer with 5 spindles (bottom, right, left, top, universal spindle), originating from a parquet manufacturing facility. Working width: 230 mm Working height: 120 mm Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bljdpsz D Eyxofx Adhjp Bottom Right Left Top Universal spindle Weight approx. 3000 kg

Condition: excellent (used), functionality: fully functional, working width 950 mm calibrating unit with metal roller combination unit with rubber roller and automatically adjusted sanding pad Blsdpfx Adjz D Ackehsp star-delta start pneumatic oscillation controlled by photocells two feed speeds of the conveyor motor power 7.5 kW year of manufacture 2000 power supply 400V weight 976 kg

Condition: excellent (used), functionality: fully functional, working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Bodezz Nmmspfx Adhslp

Year of construction: 2018, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, panel saw -Manufacturer: SCM HOLZKRAFT, Panel saw type minimax SC 2C VRS-08 -Main motor: 4 kW -Pre-scoring motor: 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -max. Cutting height: 90° 100 mm / 45° 79 mm -Miter cut: up to 45° -Cutting width: 920 mm -Table length: -Overall dimensions: 2430/1810/H1030 mm -Weight: 390 kg Bodpfx Adoz N Hqkehelp

Condition: excellent (used), functionality: fully functional, Working width: 900mm Steel calibrating roller Combination unit with a rubber roller Motor power: 11kW Pneumatic shoe adjustment Pneumatic oscillation with a photocell Element thickness gauge Bsdpfezxp Npox Adhslp Electric table adjustment Star/Delta start-up Power supply: 380V