Used Scm Si 15 Wf for sale (623)

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. Cgodpfx Ajzd Uf Tehvjw All adjustments are functional.

Condition: good (used), functionality: fully functional, SCM SI12B circular saw Cutting width from the right side: 620 mm Csdpfxszdriij Ahvogw Maximum cutting height: 90 mm with a 300 mm saw blade Manual adjustment of the saw blade tilt angle up to 45° Manual raising and lowering of the saw blade Main motor power: 2.2 kW

Condition: good (used), Code: 0353 Brand: SCM Model: SIGMA 85 KC - CE Standard Cgsdpey A Svpjfx Ahvsw Electronic horizontal panel saw with clamps for precise cutting of panels, suitable for joinery, furniture, custom made furniture, doors, kitchens, plastics, composite materials and various – CE Standard Technical data: Cutting length 3200 mm Cutting width 3200 mm Blade projection 85 mm Blade carriage feed speed 6–30 mt/min N°7 panel clamps to ensure the pack is held securely in place Main blade diameter 350 mm Hole 80 Main blade motor 11 Kw Main rotation speed 3900 rpm Scoring unit diameter 160 mm - Hole 55 – Motor 1,5 kW Automatic aligner: ensures precision during cross-cuts, reducing processing times N°3 front panel support surfaces Suction inlet diameters: n° 2 diameter 120 - n° 1 diameter 150 Compressed air 7-8 bar Overall dimensions of assembled machine mm 5700 x 4350 x 1700 h Weight kg 3300

Condition: good (used), Year of construction: 1997, machine/vehicle number: AB/113309, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 95 mm, cutting width (max.): 1,300 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,000 rpm, total width: 1,300 mm, overall weight: 750 kg, year of last overhaul: 2025, Equipment: CE marking, saw blade guard, scorer, SCM Si 320 Panel Saw Used machine Serial No. AB/113309, Year of Manufacture 1997 Article Number: JA_G260501 Csdpoy Uurqofx Ahvogw History The machine comes from a vocational school. Due to investment reasons, a new saw was purchased in 2026. The last maintenance was carried out in 2025, during which belts and various small parts were replaced. Description Cutting height 90° max. 95 mm Saw blade max. 300 mm Adjustment manual Scoring saw yes Cutting width 1300 mm Adjustment manual Table length 3200 mm Saw blade swivel 0° - 45° Adjustment manual Angle stop yes Power 400V / 50 Hz 4.0 kW Speed 4000 rpm Weight approx. 750 kg Dust extraction 100 + 80 mm Dimensions LWH 3600 x 2100 x 1400 mm Condition / Work Carried Out • Machine cleaned • Machine function tested • Age-related and usage-related signs of wear • Available from stock Subject to errors and changes in technical specifications. Note: Used Goods • Prices are quoted as ex-works prices (unless otherwise stated!) from our location in Ottendorf-Okrilla/Germany - free loading! (if not otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • All items are sold as seen, without any warranty claims. The buyer is free to inspect the items at our location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the picture are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping Options: • We will gladly provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla, free of charge by arrangement. • (Optional: Our trained service personnel can assemble the machine at your location and provide a brief instruction. Travel, transport and service times are subject to an additional charge.)

Condition: excellent (used), SCM T150 Spindle Moulder Spindle diameter: 35 mm Total spindle length: 180 mm Electric spindle lift Electric fence movement Electrically adjustable tilt angle -10/45° Variable spindle speed: 3000-4500-6000–7000-10000 rpm Cjdpfx Ahjw Ral Hevogw Motor power: 5.5 kW DTR technical documentation

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Left Top Minimum length of workpiece: 300 mm Cgodpow Hbf Iefx Ahvsw Spindle diameter: 35 mm Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: good (used), Year of construction: 2018, functionality: fully functional, Horizontal panel saw / Horizontal beam saw with lift table loading Manufacturer: SCM / Gabbiani Model: Gabbiani ST 115 Year of manufacture: 2018 Cjdpoy H Up Hsfx Ahvegw Horizontal pressure beam saw with rear lift table loading, previously used in a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lift table approx. 1850 mm Max. stack height on the lift table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed: 0 - 135 m/min Variable pusher speed: 0 - 70 m/min Main saw motor approx. 9 kW Main saw blade speed: 3900 rpm Saw blade diameter: 400 mm Scoring saw motor approx. 1.8 kW Scoring saw speed: 6300 rpm Scoring saw blade diameter: 160 mm 6 clamps (3 of which include a front aligner) 2 air-cushion tables, each with blower Voltage: 400 V, 3-phase, 50 Hz, 43 A Approximate weight: 5500 kg

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB /139622, functionality: fully functional, input frequency: 50 Hz, pivoting range: 56 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,300 rpm, Equipment: CE marking, rotational speed infinitely variable, We are offering this well-maintained SCM T 150 Class spindle moulder, year of manufacture 2000. Description: Spindle moulder with 3-axis control and 999 program memory slots (spindle height, fence, spindle tilt, revolutions) Spindle tilt -10° to +46° Inverter motor, adjustable spindle speed from 3,300 to 10,000 rpm Table extensions at front and rear Swivelling fence Cjdpfx Ahoy Ir Ezsvogw Clearance between cutter and table is adjustable Very good condition, minor signs of use Including accessories: • 5 additional SK40 quick-change spindles • Curved fence • Power feeder with stand • Various hand tools If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Cutting length: 4500 mm Cutting depth: 4300 mm Cutting height: 100 mm Main saw unit Main saw motor: 11 kW Scoring saw unit Cutty cutting optimizer Grooving capabilities 1 fixed front table with air cushion system 3 mobile front tables with air cushion system Pusher carriage with 9 clamps Cjdpfxozbrnns Ahvogw Software: WinCut Label printer Approximate weight: 3700 kg Available from the end of September 2026.

Condition: used, functionality: fully functional, SCM si12 panel saw Specifications: • Condition – used, after a comprehensive inspection • Manufacturer – SCM • Model – si 12 • Carriage length – 150 cm • Diameter of installed saw blade – 300 mm • Main saw motor – 3.0 kW • Saw blade can be tilted manually • Manual raising and lowering of the saw blade • Max cutting height – approx. 90 mm • Side table, dimensions: 85 x 60 cm • Dust extraction port – 100 mm diameter • Weight – approx. 450 kg • Overall dimensions: 350 x 150 x 100 cm (width x length x height) • Dimensions for transport: 90 x 150 x 100 cm (width x length x height) Additional information: • The machine is in good technical condition and ready for immediate use. • The photos show the actual condition of the item being sold. Cjdpfx Ahoza Hi Revjgw • It is possible to turn on and inspect the machine on-site. • Free training on how to operate the machine is provided (at the company's premises). • The price listed in the auction does not include VAT and transport costs. Financing and transport: • We arrange transport using our MDD fleet, courier companies, or external carriers. • We offer financial support in the form of leasing or a leasing loan.

Condition: ready for operation (used), Year of construction: 1996, SCM SI16N CE-compliant Sliding table: 3200 mm Cutting width to the right of the saw blade: 1250 mm Saw blade hydraulically raise and tilt Tiltable up to 45 degrees Saw blade diameter: 400 mm Saw blade bore: 30 mm Motor: 380 V, 50 Hz, 5.5 kW Speeds: 3000/4000/5000 rpm Scoring unit: Yes Upper dust extraction hood Codpey Sv R Ajfx Ahvsgw Extraction diameter: 80/120 mm Required space Length: 3550 mm Width: 2200 mm Height: 1500 mm Weight: 1000 kg Year of manufacture: 1996 Functionality tested Available from early July Machine from training operation More photos coming soon

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, Used SCM Pratix S 15 - Year: 2012 - Available in January 2026 - 3 axes - Drill head Cgsdpfx Ajxl D Slshvjw - Videos available

Condition: used, Year of construction: 1994, Used, excellent condition, top specification, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 change spindles, adjustable table insert Manufacturer: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor: 6 / 7.5 kW Cjdpfx Aheythdvjvsgw tilt range from -10° to +45° motor brake motor with 2 speeds, pole-changeable speed settings: 3250/5000/6500/10,000 rpm right and left rotation Table size: 2700 x 700 mm Milling spindle diameter: 15 x 30 mm / 1 x 40 mm Milling spindle clamping: HSK Quick-change spindle system: SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – depth of cut – jaw offset Guard and pressure device Top control panel Swiveling control panel - electric height adjustment - electric tilt adjustment - electric milling fence Positioning control for 3 axes: height/tilt/milling fence with 99 programs Digital displays for tilt angle – spindle height – fence depth Swivel-away fence device Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction connection 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in the current condition as inspected, function tested, without overhaul, without warranty or guarantee.

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Codovyuqfopfx Ahvogw

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Cjdovwga Hepfx Ahvogw

Condition: excellent (used), Panel saw 320cm Si5 Sliding table 320cm, Saw unit tilting 0–45 degrees Tilt and blade height adjustment are motorised, Rip fence on the right, motorised adjustment up to 1500mm, 2-axis scorer, electrically adjustable, 7kW motor, 3 spindle speeds Max. blade diameter 550mm, Angled sliding table with electronic displays Used machine, very good condition, Few hours of operation, Cgjdpfsyt Ih Usx Ahvew Main saw has operated for 732 hours.

Condition: used, Year of construction: 2006, functionality: fully functional, Machine identification Cedpfjy Iwy Dex Ahvsgw Model: SCM Sigma Plus 125 P 45 Type: heavy-duty panel saw with lifting platform Manufacturer: SCM Group S.p.A., Italy Serial number: AE/028708 Year of manufacture: 2006 (used machine) Condition: used industrial panel saw Main equipment / configuration Fixed, phenolic-coated front air cushion table with stop Three movable, phenolic-coated air cushion tables Pneumatic automatic alignment device Quick saw blade change system Independent main saw blade lifting THK precision linear guides Four additional clamps in the right-angle alignment zone Optimized saw blade extension PC operator interface in English

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cutting height (max.): 90 mm, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, overall weight: 4,400 kg, cutting length (max.): 3,800 mm, main saw diameter: 380 mm, Beamsaw SIGMA IMPACT 90 (SCM Group) suitable for furniture panels precize cutting by one or more panels overlapped. Manufacturer: SCM Group Model: Sigma Impact 90 Production year: 2017 Cutting width: 3.800 mm Csdpfx Aox Nc Ayjhvegw Cutting depth: 3.200 mm Max. cutting height: 90 mm Front tables (air cushion): 1x 2.500x600mm, 3x 2.500x600mm Machine basement with air-cushion. Max. main blade diameter: 380 mm Scorer diameter: max. 300 mm PUSHER: brushless motor, max. speed 120 m/min ! SAW CARRIAGE: brushless motor, max. speed 150 m/min ! THK linear guides for the saw carriage movement. THK linear guides for the PUSHER movement. Automatic centralized lubrication of THK linear guides. Hi-Tronic kit: - main motor 15 kW (mode S6) - vertical movement of main and scoring blade by price ball-screws - optimized stroke of the main blade - electronic scorer adjustment in 2 axis (vertical, horizontal) - grooving with the main blade (electronic depth adjustment) - postforming cuts - window cut outs (blind cuts) - AKE flange for main and scoring blade Quantity of clamps (grippers): 10 pcs (maximum) Automatic exclusion of the clamp acting on the panels edge (up to 800 mm width). Start/stop pedal. Label printer. Control SW: WINCUT Optimalisation program: OTTIMO PERFECT CUT TOP (1x HW key) Control PC Eye-S: Windows + LCD touch screen 21" Air conditioning device for the electric box. Panel´s dimension automatic measuring. Laser line for the visualisation of the cutting line. Automatic double side aligner - motorized (60-2.200 mm). Machine stat: fully working Possibility to see in actuall production. Availability: cca April 2026

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Cjdewwrywopfx Ahvsgw

Condition: used, Year of construction: 2004, PLC control Panel height mm 10-60 Solid mm 15 Pvc / Abs mm 3 Cgodju Tyx Aspfx Ahvsw Feed speed up to mt/min 12-18 Working height adjustable by PLC Adjustable panel support guide Side roller conveyor with idle wheels for panel support Rightening unit Roll holder plate Gluing unit for EVA glue with pre-melter Edge pressure unit End trimming unit Trimming unit with overlapping motors Tiltable chamfering unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush unit

Year of construction: 2006, condition: ready for operation (used), USED AUTOMATIC PANEL SAW WITH FRONT LOADING Brand: SCM Model: SIGMA IMPACT Year: 2006 CE compliance Useful cutting dimensions: 3200 x 3200 mm. Cutting height: 67 mm 3 air tables: one long and two shorter, wide tables Cgedpfx Ashkr A Sjhvew 6 pneumatic clamps Main saw motor: 10 HP Scoring saw. PC with WINCUT software.

Condition: used, Year of construction: 2001, machine/vehicle number: AE/22614, functionality: fully functional, cutting width (max.): 4,500 mm, total length: 5,000 mm, total width: 7,000 mm, total height: 2,350 mm, cutting length (max.): 3,200 mm, SECOND-HAND PANEL SAW SCM MOD. SIGMA 65 - CE RULES - Cutting dimensions: 4500X3200 mm - Main blade projection: 65mm - N. 6 clamps - Saw carriage speed: 12m/min Cgjdox Rvazopfx Ahvew - Main blade diameter: 300mm - shaft diameter 80mm - Scorer blade diameter: 160mm - shaft diameter 55mm - Main blade motor: 5,5kW - Overall dimensions: 7000x5000x4350 - S/N AE/22614 - Year 2001

Condition: excellent (used), SCM Sintex four-sided planer. Cgodpfxox E R Hxe Ahvow

Condition: excellent (used), Panel saw SCM Si400e 9/24 Technical specifications: Carriage length: 3200 mm Electrically adjustable blade angle Electrically operated blade lifting Electric adjustment of right-side rip fence Cutting width right: 1270 mm Codpfx Aew Rkz Sjhvegw Maximum cutting height: 130 mm Blade speed variable via belt Scoring unit speed: 6500 rpm Blade guard Emergency stop Main motor power: 5.5 kW Scoring unit motor power: 0.75 kW Overall dimensions: Height: 1400 mm Width: 4300 mm Length: 3550 mm

Condition: used, Year of construction: 2012, functionality: fully functional, Condition: fully operational, well maintained, in production. Available immediately! SCM SIGMA IMPACT 87 panel saw, 2012 years, powerful, accurate, and reliable industrial panel saw designed for high‑productivity furniture and panel‑processing operations. Ideal for woodworking factories, cabinet manufacturers, and large-scale production. Technical specifications Cutting dimensions: 3200 × 2100 mm Cgjdpfx Aeycg Rmehvew Main blade projection: 87 mm Main blade diameter: 350 mm Main blade speed: 3900 rpm Main motor power: 5.5 kW Scoring blade: 1.5 kW, 6300 rpm, 160 mm Carriage speed: 6–30 m/min Pusher speed: 27–38 m/min Standard grippers: 5 Dust extraction ports: 3 × 120 mm or 1 × 150 mm