Used Scm Tech Z 2 for sale (575)

Condition: new, Year of construction: 2026, Holzkraft Minimax ST 5es - Maximum equipment for professionals Saw-milling combination with miter cutting device and swiveling milling spindle Art. No.: 5501086 Ø 350 mm main saw blade with 118 mm max. cutting height, which is also achieved when the scoring saw blade is installed Scoring unit with separate motor and Ø 120 mm saw blade, easily and precisely adjustable from the outside Saw unit can be tilted from 90° to -45 High-precision format sliding carriage made of anodized aluminum Large extension arm (1200 x 650 mm) With material roller and extendable aluminum telescopic fence up to 3300 mm Pivoting milling spindle from 90° to -45° backwards into the milling fence Four milling speeds With right-left rotation of the milling spindle Three independent motors With lockable main switch, motor protection switch With separate saw-parallel fence and separate jointing fence for dressing as standard Equipment details: Sliding carriage with ball contact system Made of anodized aluminum Guides made of hardened and ground steel, 15% harder than conventional steel Double cradle milling unit Swiveling, made of cast iron Fixing points directly on the table, thus optimal running smoothness Milling spindle mounted far up on precision ball bearings, thus low bearing load and longest possible service life Powerful industrial motors Milling stop Heavy-duty professional version The high-quality milling fence made of cast iron is supplied with fine adjustment as standard 3-fold positionable for quick return of the setting With fine adjustment via toothed rack, numerical display and aluminum milling stop jaws Rip fence With fine adjustment and quick clamping Sturdy round bar guide made of ground steel Conveniently folds down for cutting large workpieces Reversible aluminum ruler for narrow workpieces Rodpfx Aod Hx Hmjl Ijt Cast iron double weigh saw unit Height adjustment via dovetail guide Extremely robust and torsion-resistant for precise cuts Close to the saw blade, mounted on both sides Height and up to 45° inclination adjustable Scoring unit with separate scoring motor 0.55 kW as standard Boom with angle-adjustable telescopic crosscut fence with degree raster graduation Dimensions and weights weight approx. 900 kg Connection dust extraction diameter of dust extraction nozzle 3 x 120 mm Suction port diameter saw blade guard 80 mm Drive power scoring motor 0,55 kW main motor 2 x 5,0 kW Electrical data Supply voltage 400 V Format sliding carriage and table Width of sliding table 360 mm height of sliding table 142 mm Table length 1380 mm table width 465 mm Milling spindle spindle inclination 0 - -45 ° useful length of spindle 125 mm spindle speeds 3500/6000/8000/10000 min-¹ Milling tool diameter max. lowerable 240 mm tenon milling 320 mm Circular saw unit and scoring unit trimming length 3200 mm Cutting width with rip fence 900 mm Max. Trimming width to the left of the saw blade 3300 mm saw blade inclination 90 - 45 °. Max. Cutting height 90° 104 mm Max. Cutting height 45° 68 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife shaft for best results of Planer Smooth running thanks to precision unit and the heavy casting Front steel feed roller with helical gearing for an optimum feed Satin Steel pull-out roller, optionally with squeegee in the excerpt The working table is mounted on four large pillars that ensure the greatest stability under all operating conditions. The thickness table is adjusted by a Handwheel with numeric display for the planing height (exactly 1/10 mm) Equipped with two speeds, of user facing the front of comfortable selectable Powerful industrial motor Stable steel-cast iron construction Equipment details: Work table Stored on four large screws, ensure the stability of the largest under all working conditions Special lifting device correctly maintain the table position, also without lock Tersa Planer knife shaft Rjdpfed Hx Hpex Al Iot No adjust and screw more Planer blades change in seconds Self arretierend Motor thickness table height adjustment at 52 S elite s Height adjustment of the Thicknesser table motor with electronic number For greater precision and more ease of use Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight 455 kg Connect dust extraction Suction nozzle diameter 120 mm thickness Drive performance 7 main motor kW Installation information Space length 1440 mm Space potatoes

Condition: new, Year of construction: 2024, functionality: fully functional, NEW MACHINE! CNC SCM Startech CN PLUS ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter Rodpfsip Dh Iox Al Iet MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles diameter 40mm Rjdpfxoyxlris Al Ist spindles speed 6000 RPM variable regulated feeder pneumatic pressure rolls electric adjustment of top head table lubrication

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm 4 heads heads adjustable in two axes diameter of spindles 40mm control of planing dimensions from the panel Rodpfx Asyxlq Ssl Ist star/delta start of spindles two feed gears table top lubrication system year of production 1998

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder Rsdpfx Aleyxlr Nj Ijt digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table

Condition: ready for operation (used), working width 230mm working height 120mm 4 spindles two axes spindles regulation spindles diameter 40mm dimensions adjusted from panel spindles delta/star start two feeding speed table lubrication year 1998 Redpfx Aleyxlrpo Ist

Condition: excellent (used), working width 230mm working height 120mm 5 heads Rodeyxlrcspfx Al Iet heads set: bottom/right/left/top/uni two axes heads regulation pneumatic clamps variable regulated feeder spindles diameter 40mm delta/star start table lubrication

Condition: excellent (used), working width 220mm working height 120mm Rsdpfx Alsyxlqxo Iot 4 heads spindles diameter 40mm variable regulated feeder delta/star start two axes heads regulation electric regulation of pressure beam spring pressure of feeding rolls spindles speed 6000 RPM

Condition: excellent (used), working width 230mm working height 120mm 4 spindles spindles diameter 40mm pneumatic pressure of feeding rolls two axes heads regulation Rodpeyxd Hfsfx Al Iet two feeding speed delta/star start electric regulation top head

Condition: excellent (used), working width 230mm working heigth 120mm 4 spindles spindles diameter 40mm pneumatic clamps of feeding rolls Rjdpfxoyxd Hle Al Iot two axes heads regulation variable regulated feeder delta/star start electric regulation of top head

Condition: excellent (used), functionality: fully functional, 29 spindles Rodpfx Aeyxc Eajl Ijt left/right spindles spindles span 32mm horizontal or vertical drilling setting of depth of drilling pneumtatic movement of drilling head

Condition: excellent (used), two bottom heads one side - right head Rjdpfxjyxcv Ss Al Iet heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles

Condition: new, Year of construction: 2023, machine/vehicle number: MR005937, Universal drilling and grooving CNC machine. Easy to use, compact, and fast in processing. The machine is equipped with the following options: - Panel end sensor - Z-axis pressure increase (recommended for hard materials) - Maestro CNC software - Keyboard type: Qwerty - Fan for electrical cabinet cooling - Automatic lubrication system Technical specifications: - Minimum panel thickness: 10 mm - Maximum panel thickness: 50 mm - Minimum panel length: 300 mm - Maximum panel length: 3000 mm - Minimum panel width: 90 mm - Maximum panel width: 900 mm - Positioning speed: 20 m/min - Number of vertical drilling spindles: 7 pcs - Number of horizontal drilling spindles (Y-axis): 2 pcs - Number of horizontal drilling spindles (X-axis): 2 pcs - Integrated grooving saw blade: Yes - Diameter of grooving saw blade: 125 mm - Motor power: 3 HP Rodpfx Aowy U A Hsl Ijt - Serial number: KK00039354

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Rjdpfx Asvxtzael Ijt Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm - Working height (finished profile thickness) min/max: 6 / 120 mm - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Year of construction: 1994, condition: excellent (used), 29 spindles maximum width of the element 168mm left / right spindles 32mm spindle spacing electric adjustment of the angle of the aggregate 4 pneumatic clamps pneumatic extension of the drilling head power supply 380V Rjdpfjiclfbjx Al Iot

Condition: excellent (used), Year of construction: 2006, 4 AXIS CNC ROUTER X axis : 3400 mm, pos. speed : 105 mtr/min Redoxdhkcopfx Al Iet Y axis : 1720 mm, pos speed : 80 mtr/min Z axis : 400 mm, pos speed : 25 mtr/min C axis : See pictures attached Main router : POWER 2000 : 10 Kw ( 15 Hp ) Router speed : 900 - 18.000 rpm Tool chucks : HSK63 Rotating tool bank : 12 plc. Number of alloy vacuum beams : 8 pc. Number of vacuum suction cups : 3 x 8 = 24 pc. NUM 1040 / Windows XP Pro / XILOG Plus Drilling : 12 vertical(7 right/5 Left), 6 horisontal ( X : 2 + 2 / Y : 1 + 1 ), CC 32 mm Saw spindle, max sawblade : 200 mm, 0 - 360 degree, 2,2 Kw BECKER vacuum pump : 250 m3/hour, 5,5 Kw Waste conveyer in bottum of machine, outlet : Right side of machine All tools on pictures included Machine weight : 4600 Kg

Condition: used, Year of construction: 1998, Bottom right left top bottom universal Rodpfx Aljxdw Uds Iot working width 220 mm working height 120 mm

Condition: used, Wide belt sander SBF SATEFANI 2W126   - The machine in stock - Reconditioned - very good condition   TECHNICAL PARAMETERS :   - Maximum grinding width 1100 mm - The maximum height of the element 160 mm - The minimum amount of grinding 3 mm   - The main engines 2 x 11 kW - Engine feed 2.2 kW - Engines height adjustment 0,37 kW   - 1 rubber roller 65 shore with a diameter of 270 mm - 2 rubber roller 45 shore with a diameter of 400 mm   - Two types of feed speed - Pneumatic oscillation on krańcówkach - Nozzle diameter 2 x 150 mm - Tape in very good condition   Rsdpfxocvwf Ts Al Iet Overall dimensions machine: - Length 280 cm - Width 180 cm - Height 250 cm - Weight ~ 3000 kg

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Rsdpsvyuqfefx Al Iot

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Rjdpovwflbofx Al Iot

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Redpfx Aevyup Uel Iet

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Rsdpfx Asvwd U Iol Ist

Condition: new, - New -Description:TERSA quick-change system for changing planer knives in secondsFour-blade shaft for best planing resultsSmooth running thanks to precision unit and heavy cast iron designLong planing tables for precise planingRobust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flatLarge, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°With auxiliary fence as standardPowerful 5.0 kW industrial motorSturdy cast steel constructionSlot drilling device can be retrofittedLength (product) approx. 2250 mmWidth/depth (product) approx. 1370mmWeight (net) approx. 465kgJointerTotal length of the tables 2250mmMax. chip removal 8mmDressing fence length 1200mmDressing fence height 160mmSuction connectionSuction nozzle diameter 120mmInstallation informationSpace requirement length 2250mmSpace requirement width/depth 1440mmExplanation of space requirementWorking area length 1000mmWorking area width/depth 3500mmChip removal max. thickness 8mmElectrical dataPower drive motor 5kWSupply voltage 400VMains frequency 50HzItem no. 5503521 Redpfx Aovwf Hrol Iot

Condition: used, Year of construction: 2006, incl. 2nd sanding padused, top equipmentmake SCM Samcotype EG 2500year of manufacture 2006machine . AM/28506motor 3.0 / 2.2 kWsanding length approx. 2500 mmsanding width approx. 1000 mmbelt length approx. 6800 mmtable size approx. 2500 mm x 1000 mmcranking right approx. 700 mmcranking left approx. 700 mmelectric adjustmentupper belt coverupper sanding supportbelt speeds 1400 /2800 rpm = 23 m/sec /46 m/secright-left runsuction connection D 160 mmspace requirement approx. 3900 mm x 1700 mm x 1500 mmtotal connected load approx. 4.55 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Redpfxevwffbo Al Iot