Used Scrap Shredder for sale (1,312)

Condition: excellent (used), Catalogue number 7268 Djdpfezmgkgex Anzskr TECHNICAL DATA - Loading hopper dimensions (top) L/W: 1000x600mm - Loading hopper dimensions (bottom) L/W: 650x600mm - Rotor width: 570mm - Motor: 15kW - Screen: 16x12mm - Knife size: 40x70mm - Number of knives: 18 pcs - Autoreverse - Pressure drawer - Pump motor: 0.75kW - Dimensions L/W/H: 1900x1450x1450mm - Weight: 1040kg ADVANTAGES – German production – Not repainted – Very good condition – Used shredder Original photos Video of machine start-up: youtube.com/watch?v=fSKMkMPlp-8 Net price: 29,900 PLN Net price: 7,120 EUR (based on rate 4.2 PLN/EUR) (Prices may vary with currency fluctuations)

Condition: excellent (used), Catalog number: 8045 TECHNICAL DATA - inlet width: 520mm - inlet height: 220mm - shaft diameter: 650mm - shaft width: 510mm - blade length: 510mm - number of blades: 2 pcs - 2 x toothed pull shaft, bottom, 4kW - 2 x toothed pull shaft, top, 3kW - main motor power: 55kW - conveyor belt length: 5200mm - conveyor belt width: 620mm, 0.12kW - machine dimensions (L/W/H): 3100x1200x1300mm Dkedozmf Azjpfx Anzor - weight: approx. 4000kg ADVANTAGES – automatic reversing with adjustable settings – with a 5200mm conveyor belt – German-made – very good condition – used shredder Net price: 88900 PLN Net price: 21167 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8043 TECHNICAL DATA - inlet width 450mm - inlet height 250mm - shaft width 530mm - shaft diameter 450mm - blade length 530mm - number of blades 2 pcs - screen dimensions 50x50mm - toothed bottom pulling shaft 2 pcs - bottom shaft motor 0.75kW - toothed top pulling shaft - top shaft motor 0.78kW - main motor 45kW - conveyor belt 0.12kW - belt dimensions length 5150x width 620mm - conveyor belt dimensions 5200x650x800mm - machine dimensions length/width/height 2620x1650x1220mm - weight approximately 2500kg ADVANTAGES – German-made – 5150mm conveyor belt – used shredder, good condition Net price: 65900 PLN Net price: 15690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations) Dkjdpfx Aszmfzksnzer

Condition: excellent (used), Catalogue number 7973 TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg Dkjdezmfw Ejpfx Anzer ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW Dkjdpfx Aezmfu Renzsr - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: new, Power 15 KW Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 rpm.Number of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238 Dksdpfevwfhcsx Anzjr

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Dkodexu I T Espfx Anzsr Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Leasing or installment payment available—please contact us for details.

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 150mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc petrol engine with 12.4 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- With drawbar -- High user-friendliness Dkedpfst Ivl Aex Anzer -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL MOTOR Equipped with a 420 cubic meter petrol engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is started conveniently via the electric starter or the cable pull. The power of the engine is transmitted to the centrifugal clutch via the V-belts, ensuring a consistently high power output. The engine also has a low oil sensor, which switches the engine off if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our shredder enables efficient and versatile processing of suitable wood stocks. Thanks to the large opening of the feed hopper, optimum and convenient feeding of the material is guaranteed. The high-quality workmanship and the use of hard-wearing materials ensure a long service life for the shredder, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at a speed of up to 2000 revolutions per minute, which ensures fast and efficient shredding of the material and reduces working time. The blades are made of high-strength steel and are specially designed for the shredder's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly so that maintenance work can be carried out quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be moved and positioned effortlessly around your site, making handling, transportation and storage much easier. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150THX Drive type: V-belt 17x1255La Max. Branch thickness: 150mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 255kg Basic dimensions Total length: 2700mm Total width: 1218mm Total height: 1424mm Ejection angle: 360º Engine capacity Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 150MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: excellent (used), Year of construction: 2013, rotor diameter: 370 mm, rotor length: 1,200 mm, type of input current: three-phase, year of last overhaul: 2026, input voltage: 400 V, WEIMA WL 12 – Single-shaft shredder for plastics For sale: a single-shaft shredder from WEIMA, model WL 12 (or a special version based on this model), designed for shredding plastics. The machine features a robust and durable construction, a hydraulic material feed system, and a drive with a Bonfiglioli gearbox. It is ideally suited for recycling plants, plastics processing companies, and manufacturing businesses. Technical data: Manufacturer: WEIMA Maschinenbau (Germany) Type: single-shaft shredder Working chamber: 1200 × 1200 mm Working length of the rotor: 1200 mm Rotor diameter: approximately 320–370 mm Hydraulic material feed system Bonfiglioli gearbox Rotor speed: approximately 90 rpm Motor power: 37 kW Power supply: 400 V Weight: approximately 3300 kg Dedpozqgmpjfx Anzokr The machine is designed for shredding PP, PE, HDPE, LDPE, ABS, PS plastics, plastic crates, pipes, profiles, car bumpers, post-production waste, and injection molded parts. The output depends on the type of material and the screen used, and is approximately 500 to 1000 kg per hour. The machine is based on a proven WEIMA design, which is valued for its durability, reliability, and low operating costs. It is possible to inspect and test the machine on site. For any questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Dsdpszkg Sfsfx Anzekr Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Dodpeu Tha Isfx Anzekr Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, 1 set of spacer washers for EXTEC 3600 shredder Dedpszg Uyvjfx Anzokr EXTEC article number: S0290000

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm Dksdpfey Ubvpsx Anzsr - Screen: 15/20 mm Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 75 kW (101.97 HP), COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – Year of manufacture 2011 For sale is a complete waste wood disposal plant by Rudnick & Enners, built in 2011. The line consists of 20 components and was used for the automatic removal, sorting, and processing of edgings, wood chips, and residual wood in a sawmill. The system has a modular design, is dismantled, in very good condition, and available immediately. Technical Overview – Positions 1 to 20 01 – Crooked chain conveyor from reducer, W 600 mm 02 – Vibrating chute 1-edging line, L 13.0 m, W 650 mm 03 – Vibrating chute 2-edging line, L 15.0 m, W 650 mm 04 – Vibrating chute frame saw line, L 8.50 m, W 500 mm 05 – Vibrating chute 1-frame saw line, L 10.0 m, W 500 mm 06 – Vibrating chute 2-frame saw line, L 9.0 m, W 500 mm 07 – Vibrating chute frame saw roller conveyor, L 7.50 m, W 500 mm 08 – Vibrating chute trimming line, L 11.0 m, W 650 mm 09 – Vibrating chute trimming line, L 9.0 m, W 650 mm 10 – Screw conveyor for sawdust, L 4.0 m, Dia. 300 mm 11 – Conveyor belt to chipper, L 3.60 m, W 500 mm 12 – Slab conveyor belt, L 11.0 m, W 300 mm 13 – Waste conveyor belt, L 11.60 m, W 300 mm 14 – Metal detector 15 – Chipper type RE-TH 250/700/5, Motor 75 kW 16 – Double screw under chipper, W 600 mm 17 – Crooked chain conveyor to screen, W 600 mm 18 – R&E screen, L 4.0 m, W 2.0 m 19 – Crooked chain conveyor to landfill, W 500 mm / W 300 mm Dsdpfx Anoznunpszekr 20 – Crooked chain conveyor to wood chip storage, W 600 mm Additional Information Manufacturer: Rudnick & Enners Year of manufacture: 2011 Condition: very good, used and dismantled Availability: immediately ex stock Location: A-3525 Lugendorf, Austria Application: Sawmills, biomass plants, wood processing

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,200 kg, total length: 1,750 mm, total width: 1,200 mm, total height: 1,640 mm, working width: 630 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 15, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 630 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Shredder, wood chipper, and material shredder – Hacker MHR630 ecoline The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and an excellent price-performance ratio, making them ideal for craft businesses, recycling companies, and wood processing companies seeking an economical and high-performance solution. The use of Ecorings ensures a consistent shredding process for a wide variety of materials. An integrated, self-adjusting scraper bar reduces the occurrence of blockages in the feed chute when processing thin materials. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - Robust construction Dkodpfx Anozmndhezsr - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - Includes optional self-adjusting scraper bar - Includes Ecorings - MHR630 ecoline Rößler material shredder – “Made in Germany”

Condition: like new (used), Year of construction: 2026, operating hours: 18 h, functionality: fully functional, power: 15 kW (20.39 HP), REUSER SD600 Industrial Shredder – Demo Machine with Less Than 20 Operating Hours Economically shred residual wood instead of disposing of it at high costs. Are you looking for a reliable solution for processing wood waste, cut-offs, pallets, chipboard, or other wood residues? Dkjdpfx Asznuhvonzsr With the REUSER SD600, you get a powerful industrial shredder in a robust, professional design – ideal for carpentry shops, joineries, timber construction companies, pallet manufacturers, sawmills, and recycling companies. Demo Machine – Almost Like New This unit is a demo machine with fewer than 20 operating hours. The machine was only used for a few weeks at a customer's site. The customer then decided to opt for a larger machine model. Take advantage of this opportunity now and secure this almost-new machine at a significant price advantage compared to a new machine. Your Advantages ✔ Demo machine with less than 20 operating hours ✔ Immediately available – no long delivery times ✔ Technically inspected and ready for immediate use ✔ Significant price advantage compared to a new machine ✔ Robust industrial design ✔ 12 months warranty ✔ Inspection and demonstration possible at any time Ideally suited for: Carpentry shops Joineries Timber construction companies Sawmills Pallet manufacturers Furniture industry Plastic processors Recycling companies Disposal companies Suitable for: ✓ Solid wood ✓ Chipboard ✓ MDF ✓ OSB ✓ Pallets ✓ Wood waste ✓ Cut-offs ✓ Plastics ✓ Packaging materials

Year of construction: 2024, condition: new, The shredder is ideal for shredding heterogeneous materials. Dkedpfx Anjgkr I Nszor

Year of construction: 2024, condition: new, The mini pallet shredder is ideal for shredding small and/or dismantled pallets. Dksdpfspahwvjx Anzor

Condition: good (used), Year of construction: 2025, operating hours: 1,000 h, functionality: fully functional, For sale is a container-type scrap shear with a cupola attachment and a bottle attachment for reducing the cutting height. The machine can be inspected at any time. Dedpfx Aszhwvcsnzskr

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Dksdjwu Nwnjpfx Anzor Infeed dimensions 650mm x 250mm with infeed vibrating trough

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Hopper inlet 2.26 m x 1.65 m Dodpfx Anowu Nwhezekr

Condition: good (used), Year of construction: 2010, • Brand: Erdwich • Type: M700/1-900 • Year of construction: 2010 • Machinenumber: 2036 • Engine power: 22,0 kW • Single axle • Hydraulic slide The shredder has been completely serviced at our workshop and fitted with a new sieve bedholder. Dkedevmzkxepfx Anzsr We currently have 2 sizes of sieves in stock. These sieves are suitable for reducing paper to 20 or 25 mm.

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm Dksdoza Eipjpfx Anzer - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7687 TECHNICAL DATA - Inlet width: 540 mm - Inlet height: 300 mm - Shaft width: 630 mm - Shaft diameter: 700 mm - Knife length: 630 mm - Number of knives: 2 pcs - Screen size: 40x40 mm - Bottom driven serrated shaft Dkjdpfoza Ei Nex Anzjr - Lower shaft motor: 4 kW - Top driven serrated shaft - Upper shaft motor: 4 kW - Belt feeder - Feeder belt length: 4720 mm - Feeder belt width: 500 mm - Main motor: 75 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 3100x2000x1830 mm - Overall feeder dimensions (L/W/H): 4800x780x980 mm - Weight: approx. 5000 kg ADVANTAGES – German-made – Autoreverse – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR depending on exchange rate at 4.2 EUR (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Dsdpfx Aozadr Nsnzekr Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)