Used Screed Machine for sale (64,714)

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm Gbodpfjzvm Hyjx Aanew z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B Plananlage 125 spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min max. torque on the spindle 1410/2000 (100/40 % ED) Nm total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe Gjdpjz D Aquefx Aansbw 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details Gbsdpfs Aa N Tbox Aanow spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Year of construction: 2011, functionality: fully functional, Heidenhain iTNC 530 CNC control Travel ranges: X-axis 1.016 mm Y-axis 610 mm Z-axis 760 mm Godpfxez S H H Do Aansbw Spindle speed 10.000 rpm Tool holder HSK 80 Power 12 kW Table clamping surface 1.250 x 590 mm Table load 900 kg Feed rate 40.000 mm/min. Machine weight 9.400 kg Equipment: Heidenhain iTNC 530 CNC contouring control Electronic handwheel 3D touch probe tool changer 2-position pallet table Coolant system with internal coolant supply (ICS) Chip conveyor Oil mist extraction system

Condition: used, total height: 2,700 mm, total width: 3,000 mm, total length: 5,300 mm, Year of manufacture: 1992 Colour: White Empty weight: 11.000 kg Price: On request - Year: 1992 - Serial number: 9220212 - Drive system: Conventional - Bed milling machine model: Movable table - Number of axes [pcs]: 3 - X-axis travel [mm]: 3200 - Y-axis travel [mm]: 1000 - Z-axis travel [mm]: 1000 - B-axis rotation [°]: 360 - C-axis rotation [°]: 360 - Table length [mm]: 3500 - Table width [mm]: 800 - Tool holder: ISO50 - Main spindle power [kW]: 15 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 2000 - Max. workpiece weight [kg]: 4000 - Options: Digital readout Godpfxezwn Egs Aanebw - └ Type of digital readout: Sony 3-A - Transport dimensions: 5300mm x 3000mm x 2700mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 661351, measuring range X-axis: 275 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 300 mm, total height: 294 mm, type of input current: AC, total width: 77 mm, overall weight: 1 kg, input voltage: 230 V, table length: 122 mm, repeat accuracy: 0.02 mm, year of last overhaul: 2026, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, 1 Careful owner, approx 500 hours of usage. Current Calibration certificate dated Nov 2026. Comes with the following: HP ZBook 15 G3 Workstation Laptop - High specification laptop PC for use with Creaform Scanners. Windows 7 Pro 64bit 15" Display UHD Screen Intel i7-6700HQ 64GB DDR4 RAM NVIDIA Graphics Quadro M2000M 4GB 256GB SSD M.2 NVMe (approx. 600hrs powered) 500GB HDD (approx. 600hrs powered) VX Elements software installed. VX Remote 10 Inch Tablet 3D Scanner External Battery Bank- 72wh Handyscan 3D Scanning Turntable with bag Positioning Targets - Magnetic - Pack of 750 in metal tin Positioning Targets - Adhesive - Pack of 500 - box of 34 units (17000!) Gbedpfx As Ahy Huoanow Scraper for targets - 1 unit Extra Spare USB 3.0 Cable for HandySCAN700 - 4 meters AESUB blue scanning Spray - 1 can Rugged Custom built freight case for Scanner box (18mm structural Plywood)

Condition: used, Year of construction: 2023, Felder Format 4 Profit H80 21.31 Machining Centre. Serial No TBA (2023), F4 Integrate Control, Working Area 3090 x 2100 x 85mm, Travel X/Y/Z = 3860/3500/225mm, 500m3/h Vacuum Table, Main Spindle 10kW, HSK F63 at 1000 – 24000rpm, 15 Position Toolchanger, Length Measurement Tool, Hand Held Remote Control, Loading/Unloading Tables, Upper Table Extraction, Light Guards Godpfxj Ah Etyo Aanebw Location: This lot is located in Gateshead, Tyne & Wear, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 1 of Auction 3516

Condition: used, ZOCCA RU 2000/3 UNIVERSAL CYLINDRICAL GRINDING MACHINE • Manufacturer: Zocca (Como, Italy) • Model: RU 2000/3 (External / Hydraulic Universal Grinder) • Center Height: 180 mm • Maximum Grinding Diameter: 360 mm • Distance Between Centers: 2,000 mm • Drop down Internal Spindle • Steady rests • Coolant system • Spare wheels • Safety foot switch • Machine manual Godpfx Aaj Ah H D Njnobw

Condition: used, Year of construction: 2020, CMS Athena 3015 5 Axis Machining Centre with OSAI Control. (2020) Traverses X Y Z; 3200 x 1500 x 900mm, B Axis -/+ 120 degrees, C Axis -/+ 370 degrees, Spindle Power 15Kw, Spindle Speed 24,000rpm, 8 Station Tool Change, Tool Size HSK63F. S/No. 9985, Machine Dimensions: 5800 x 2700 x 3350mm, Machine Weight: 7700kg Location: These lots are located in Leicester, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gbedpfx Aae Ah Evbjnsw

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking Gode Ah E Siopfx Aanobw IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production Gsds Ah Eyqopfx Aanebw - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: used, Year of construction: 2011, HAAS VF-3 Vertical Machining Centre (2011), Traverses X Y Z: 1016 x 508 x 635mm, Table 1200mm x 460mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 40 Station Side Arm ATC, Through Spindle Coolant, Low Volt Light. S/No. 1083369. Country of Origin: U.S.A. Gsdpe Ah Hbcsfx Aanebw Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2013, Trumpf Fibre TruLaser 3030 Flat Bed Laser Cutter (3kw/Low Hours/Trumpf Service) (2013) Gbsdj Ah Hduspfx Aansw Location: These lots are located in Fareham, Hampshire, UK. Unfortunately there are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2007, Manufacturer: CFS Model: CrumbMaster600 Year: 2007 Condition: Used Serial number: 529 Stock number: 3467 Gbsdpo Ah Tl Ijfx Aanow Belt width: 600 mm Belt speed: 2 - 20 m/min Power: 3 x 400V, 50Hz, 2kW Dimensions: 2750 x 1150 x 2200 mm Weight: 560 kg CFS breading machine for all types of breading flour and crumbs. Belt and blowing device with variable speed control.

Condition: used, Hurco VMX 60 U 5 axes Vertical Machining Centre, new 2014. Used Hurco VMX60U 5-axis vertical machining centre, new in 2014. Godpfx Aae Aay Ucjnobw HURCO VMX 60UI, VERTICAL MACHINING CENTRE, Table 500mm diameter table, C axis - 360 deg. Capacity L x W x H X= 1524 Y=660 Z=520mm / A axis - 30/-110 deg, Spindle taper BT40, Spindle speeds 12000rpm, Feed rates 24m/min, Rapid traverse rates 32, 32, 24m/min, 40 station tool changer, CNC Control Hurco Ultimax CNC, Total Power HP/KW 18kW, Serial Number H-VX6011, Year 2014, Electrics 380-440/3/50, Overall size: 5455 x 4590 x3124mm, Weight:8.5 tons, Made in Taiwan High-performance CNC machining centre with simultaneous 5-axis capability, ideal for complex precision engineering and aerospace components. Available now. Hurco VMX60U 5-Axis Vertical Machining Centre Available for sale is this Hurco VMX60U 5-axis vertical machining centre, originally manufactured in 2014. Designed for high-precision and complex component production, the VMX60U combines the flexibility of simultaneous 5-axis machining with Hurco's renowned conversational programming and CNC control technology. Hurco VMX60U 5-Axis CNC Vertical Machining Centre for sale, manufactured in 2014. This high-specification machining centre is equipped for complex multi-axis machining applications across aerospace, precision engineering and subcontract manufacturing sectors. Ideal for subcontract engineering, aerospace, automotive, medical and precision manufacturing applications, the VMX60U enables efficient single-setup machining of intricate parts, reducing cycle times and improving accuracy. The machine's universal swivelling spindle and integrated rotary table provide excellent access to complex workpieces, whilst maintaining the rigidity and reliability expected from the Hurco VMX series. Key Features Hurco VMX60U Vertical Machining Centre 5-Axis Machining Capability New in 2014 Simultaneous multi-axis machining Suitable for complex and high-precision components Ideal for aerospace, automotive and subcontract engineering sectors Hurco control system Stock Number: 113500 Located in the United Kingdom This used Hurco VMX60U CNC machining centre is available immediately. Contact Bowland Trading for pricing, availability and further technical information.

Condition: used, Year of construction: 1988, Grinding machine Manufacturer: Johannsen Type: T 84 Year of manufacture: 1988 Technical data Table length: 2,700 mm Gsdpfe Aigl Rox Aanjbw Table width: 800 mm Grinding belt length: 7,100 mm Grinding belt width: 150 mm Motor power: 4 kW Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 1991, working area 225 mm table-size L:550 mm table-size B:200 mm sanding disc diameter 200mm mm magnetic plate size 500 mm weight of the machine ca. 1,8 t Gjdpsud Algefx Aanjbw dimensions of the machine ca. 2000x1600x2100 m

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Gedpfxswid Sps Aansbw Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm Gjdpfxs Aiiqte Aanobw quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 2000, x-travel 1200 mm y-travel 620 mm z-travel 520 mm Gbjdpo Aiiq Eofx Aanjw control TNC410 HH table-size 1550 x 600 mm feeds 1-30000 mm/min rapid traverse 45 m/min spindle turning speed - stepless 40- 8000 U/min spindle taper ISO 40 tool change unit 30 Pos. total power requirement 20 KVA weight of the machine ca. 9 t dimensions of the machine ca. 4,2 x 2,3 x 2,7 m This machine does have a long table for long parts or with a partition to work by shuttle machining. Control: Heidenhain TNC 410. We supply 3 pieces additional tables along with the machine.

Condition: used, total height: 2,050 mm, total width: 2,700 mm, total length: 2,500 mm, Year of manufacture: 2004 Colour: Beige Empty weight: 2.000 kg - Year: 2004 - CE marking present: Yes - Serial number: 200403001 - Drive system: Conventional - Horizontal/vertical: Horizontal - Power [kW]: 7.5 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1300 - Y-axis travel [mm]: 320 - Z-axis travel [mm]: 450 - B-axis rotation [°]: 350 - Table length [mm]: 1750 - Table width [mm]: 460 - Tool holder: ISO40 Gbjdpfxe Aiq Ece Aanjw - Main spindle power [kW]: 7.5 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 2050 - Options: Digital readout - └ Type of digital readout: Fagor - Transport dimensions: 2500mm x 2700mm x 2050mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2005, Rotox 2-head saw for cutting aluminium and PVC profiles. Gbsdpfx Aas Aip H Renow

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min weight of the machine ca. 1,1 t Gbedpfx Aaszmixmjnew

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Automatic pallet strapping system KZD-311 with strapping head model KSR The system is designed for strapping the following package dimensions: Product to be strapped: empty cans stacked on pallets Pallet dimensions Length min. 1,250 mm max. 1,450 mm Width min. 1,120 mm max. 1,150 mm Height 145 mm clear height 80 mm for passing the strap guide tongue Top deck height 22 mm Overall dimensions including pallet Length min. 1,250 mm max. 1,450 mm Width min. 1,120 mm max. 1,150 mm Height min. 1,000 mm max. 3,000 mm Weight min. approx. 150 kg / pallet max. approx. 350 kg / pallet Top deck support: wooden frame, length x width = pallet dimensions Interlayers made of solid cardboard or hardboard: Length 1,250 mm – 1,450 mm Width 1,120 mm – 1,150 mm Thickness each 1 mm System dimensions Height of the strapping system from floor level to column top 4,600 mm Clearance height to top mounting plate 3,360 mm Gsdpe Ai Ui Dofx Aanobw Overall width 5,330 mm Clearance width 1,860 mm Length of the pressure plate 663 mm Pressing force adjustable 0 – 1,000 – 2,000 – 3,000 N via selector switch Drive of the pressure plate via geared brake motor Pressure plate speed 135 mm/s Technical data Strapping head model KSR Strap tension continuously adjustable 200 – 2,000 N Strap feed speed 4.6 m/s Closure principle: long friction welding closure Head arrangement: lateral Travel distance to the package max. 500 mm End switch actuation: head on the package Electrical data Operating voltage 3/N/PE, 400 V, 50 Hz Control voltage 24 V, DC Total connected load 4.5 kVA Performance Number of pallets per hour approx. 15 (3.5 minutes per pallet) Number of straps 2 x transverse / 2 x longitudinal 3 x transverse / 2 x longitudinal Paint finish Paint finish of the system: RAL 5010 – Gentian Blue Paint finish of the control cabinet: RAL 7035 – Light Grey Paint finish of the protective grid: RAL 1023 – Traffic Yellow Strapping material Quality of the strapping band: PET / PP, set to PET, type KE 1200 A – GR – MF Width of the strapping band: 12.0 mm x 0.5-1.0 mm (band thickness can be adjusted) Main components • System base frame with welded support column and guide rails for the lifting carriage • Lifting carriage with eccentric rollers • Rack • Pinion • pole-switchable geared brake motor • complete plastic strap guide • 1 holding-down pressure plate • Pressing force 0 N – 1,000 N – 2,000 N – 3,000 N • 2 flap openers • proximity light barrier for height pallet detection • electrically driven traversing carriage for the strapping head, stroke = 500 mm • electrically driven strap guide tongue • automatic strapping head model KSR with strap tension compensation • strap unwinder, model KA-400-E • freely programmable Siemens S7 controller with CPU 314 / OP 7 • cable length from system to control panel = 5.0 m • lifting carriage always returns to the home position after strapping • operation via switches, buttons and illuminated push buttons (OP 7 only for text display) • error messages via plain text display Siemens OP 7 • strap tension – digital display via plain text display Siemens OP 7 • potentiometer for strap tension control in the control panel cover • strap retraction via frequency inverter • protective grid, complete • panel labeling: German • wiring diagram: German • documentation 2 copies, German

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, The VR 88 automatic vertical strapping machine is ideally suited for strapping pallets. Gjdpfxs Ai Uire Aanobw It is suitable for installation in both powered and non-powered conveyor systems. The lower lance allows the strap to be threaded through the pallet. During the strap tightening process, the strapping head moves horizontally to compensate for tolerances and ensure uniform strap tension and high stability. The system control program allows for the execution of one or more strapping cycles, depending on the customer's specific packaging requirements. The machine has been completely refurbished by us and is fully functional. Technical data: Supply voltage: 230 V / 400 V / 3-phase / 50 Hz Power consumption: 3 kW Strap types: PP or PET Strap width: 12 mm Strap thickness: 0.6 – 1.0 mm Strap tension: up to 200 kg (optionally up to 500 kg) Closure type: Hot wedge welding Closure time: approx. 1 – 3 s, depending on strap type Strap feed speed: 2.5 – 5.5 m/s Strap retraction speed: 2.5 – 5.5 m/s Strap tensioning speed: approx. 0.25 m/s Strap reel core: 405 mm Strap frame: 1,200 × 1,600 mm