Used Screw Compactor for sale (5,436)

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition. Hedetx Aknepfx Addong

Year of construction: 2023, condition: new, functionality: fully functional, Screw compressor model: UVG30-20.5WG-INV (WP-SF-BV-CM-BY2-PL-PB) Ex Medium: Biogas Electrical power: 37 kW Operating pressure: 20 bar g Hodpfx Adex R Tucsdjng Inlet pressure: 0.003–0.15 mbar (g) Volume flow: 104 Nm³/h max. H2S concentration:

Condition: good (used), overall weight: 1,200 kg, volume flow: 890 m³/h, Manufacturer: Worthington Model: RLR100V6 Max. working pressure: 9,5 Bar Power: 100Hp / 75KW 75 kW screw compressor with frequency inverter, with a flow rate of 880 m3/hour. Hnsdpfouf Nibox Addog Flow rate: 890 m3/hour. Three-phase 380V 3000 rpm Weight: 1200 kgs.

Condition: used, machine/vehicle number: W1T9630201044xxxx, mileage: 105,000 km, Year of construction: 2021, Please contact ATS Norway for more information Hnedpex S Ur Sefx Addjg Please provide reference number upon request: 21583 Specifications: 2021 model EU-approved until 06.01.2026 Km: approx. 105,000 (will increase) Wheelbase: 430/135 cm 6x2 428 hp 2020 Joab Anaconda superstructure Engine brake Full air suspension HIAB S-HiPro 130 crane Remote control Tires (see pictures) Extra lights Automatic transmission Camera mirrors Radio/DAB Available from December 1st Description:2021 Mercedes Actros 2543 6x2 single-chamber compactor truck with Joab Anaconda body.Equipped with HIAB S-HiPro 130 crane.Mileage will increase as the truck is in daily use.See video.The vehicle will not be available before December 1st. Km: 105000 HK: 428 Technical approved: Yes EU-approved until: 06.01.2027 Own weight: 17160 Total Weight: 27000 Payload: 9765 Width: 255 Length: 980 Euro: 6 Model: 2543 6x2 1 – kammers komprimatorbil m/ Joab Anaconda påbygg og kran

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Power: 11 kW Pressure: 8 bar Load hours: approx. 9,600 h #8442 Hsdjx H Ulujpfx Addjng

Year of construction: 1999, condition: good (used), Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos Hnsdpfxexy I Hps Addjg -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Year of construction: 2010, condition: good (used), 3.piece ball screw ( from HURON BAZ ) make SCHNEEBERGER Diameter 63 mm Hnjdsh I T Nrspfx Addeg Diameter 50 mm Diameter 40 mm In good condition.

Condition: excellent (used), Year of construction: 2006, overall weight: 1,000 kg, volume flow: 425.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA37 PLUS S/N - API510029 Hjdpjrz Rtbefx Addong YEAR - 2006 POWER (kW) - 37 OUTPUT. (m3/min) - 7.09 CIS (bar) - 7.5 HRS (DOC/GENERAL) - 6043 WAVE - no COND. DRYER - no COOLED (POW/WATER) - air ON TANK - no NEW/USED - USED

Condition: excellent (used), Year of construction: 2007, operating hours: 60,649 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZT90VSDFF. Integrated frequency converter and drum dryer. 90 kW with 8.75 bar and 15.50 m3/min. High-pressure element replaced in 2013. Hjdpfx Asx Nm Itsddeng

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 250028, power: 250 kW (339.91 HP), pressure (min.): 4 bar, pressure (max.): 13.5 bar, The pneumatic container is used to provide oil-free, dry compressed air for test equipment. TECHNICAL DETAILS Maximum air flow: 42.83 m³/min Pressure range: 4 - 13.5 bar Oil-free compressed air capacity: 42 m³/min at max. 7.5 bar Drive Motor power: 250 kW System structure Compressor: EKO 250 D Refrigeration dryer: HHDp 4500 / HF 5-M/5 Activated carbon adsorber: BEKO Clearpoint L 3400 V Post-filter: HF 6-60 Oil-water separator: BEKO Öwamat 16 Electric condensate drain: BEKO 14 MACHINE DETAILS Compressor unit: 4,000 x 2,100 x 2,500 mm Hedpfxjv Rdltj Addong Overall dimensions (L x W x H): 13,000 x 2,950 x 2,900mm Total weight: 20,000 kg

Year of construction: 2008, condition: good (used), Complete compressor and air station Manufacturer: KAESER Models: AS 36 / TC 31 Hnsdpfjgw Diaox Addeg Year : 2008 Working pressure 7,5 bar

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder - 2 x 30mm screw diameter Hnjdeu Hik Djpfx Addsg - 4x heating zones - dosing - Control system

Year of construction: 2006, condition: ready for operation (used), Additional Equipment Machine includes an SA 500 extractor built in 2006 and a 6m long cooling section. This KUHNE KS45-24D compounding extruder was manufactured in 2006. Ideal for processing a variety of materials, it offers robust construction and reliable performance. Consider the opportunity to buy this KUHNE KS45-24D compounding extruder. Contact us for more information. Hedpfsx D Hcqsx Addjng Application Types Extrusion

Condition: good (used), Year of construction: 2008, volume flow: 464.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA45 S/N - API595605 YEAR - 2008 POWER (kW) - 45 OUTPUT. (m3/min) - 7.74 CIS (bar) - 7.5 Hnedpfx Adjrztmwodeg

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Hodpfxsxgtd Ho Addjng

Condition: used, Year of construction: 2010, operating hours: 76,256 h, functionality: fully functional, Equipment: type plate available, Frequency-controlled compressor New oil and filters Compair Type: L22SR-7,5A V2 Volume flow: 3.53 m³/min Pressure: max. 10 bar Motor power: 22 kW Hnsdpfjwvac Rsx Addjg Year: 12/2010 Operating hours: 76,256 Weight: 355 kg A suitable refrigeration dryer and 2000L compressed air tank can be purchased separately. The machine can be demonstrated under power on site. All information provided without guarantee. Errors and interim sale excepted.

Condition: good (used), SAC spindle moulder with sliding carriage and power feed 3-roller Holzher power feed Side carriage adjustable up and down for the cutter, can also be used as a table extension Hnodpfsx Sw Szjx Addog Table with pull-out extension Spindle lock Adjustable fence with Aigner guides 5 spindle speeds (3000, 4500, 6000, 8000 and 10,000) Spindle diameter 40 mm 7.5 kW motor with brake CE mark Technical documentation included Machine tested, fully functional, ready for work

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: M60I/9033, Offer Number: M60I/9033 Hedjx Igf Njpfx Addsng Machinetype: screw washing machine Make: MIKO Type: Constr. year: 1994 capacity: Location: Germany

Condition: good (used), Year of construction: 2000, Screw compressor Manufacturer: Atlas Copco Type: GA 90 Year of construction: 2000 Power: 94 kW Pressure max: 10 bar Speed: 1,487 rpm Hnodpfjvi E Uyox Addog

Condition: excellent (used), Year of construction: 2013, overall weight: 755 kg, volume flow: 316.2 m³/h, PROD. KAESER TYPE - ASD47 SFC S/N - 3068 YEAR - 2013 POWER (kW) - 25 OUTPUT. (m3/min) - 1.07-5.27 CIS (bar) 8.5 WAVE - yes BUILT. DRYER - no EXCHANGER - yes Hnjdpfx Adora Akzedeg

Condition: used, We offer directly on behalf of the owner : Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW In the last 3 years, a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. Hnedsx Nxfkjpfx Addog The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - 1 x year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, 212kW, 460V - 1 x 2002, factory overhauled ( 8 t€ ) in 2020, unused - 1 x year of manufacture 1986, factory overhauled in 2015, used 2020 - 2023 Barrels - 16 various, new + used, with + without openings Screw shafts - 2 x approx. 4,600 mm Miscellaneous : - Supports - screw tips Sold without electrical and control devices and without screw segments. Further technical data and details on request or see data sheets in photos / PDF

Condition: excellent (used), Year of construction: 2008, operating hours: 22,795 h, functionality: fully functional, machine/vehicle number: 5039, overall weight: 600 kg, power: 18.5 kW (25.15 HP), type of cooling: air, Equipment: documentation/manual, type plate available, Frequency-controlled screw compressor with integrated heat recovery Manufacturer: Kaeser Type: ASD 32 Delivery rate: 8 bar - 3.2 m³/min Motor power: 18.5 kW Compressed air connection: G 1¼ Max. available thermal output: 16.4 kW Includes complete documentation + CE certificate Next maintenance at 24,360 operating hours Weight: 600 kg Required space: 1350 x 921 x 1505 mm (L x W x H) The machine can be demonstrated on site. Hnedpfx Aow Trghjddog All information subject to change. Prior sale reserved.

Condition: new, Year of construction: 2022, overall weight: 250 kg, total length: 120 mm, total width: 80 mm, total height: 120 mm, volume flow: 180 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PROD - CZEMAR TYPE - LEVANTER 22/10 S/N - 38020 YEAR - 2022 POWER (kW) - 22 OUTPUT. (m3/min) - 3.0 CIS (bar) - 10 Hjdpfx Asrck Ecoddjng

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, functionality: fully functional, type of cooling: air, Equipment: CE marking, documentation/manual, type plate available, Operating hours total: 494 h Load hours: 237 h Maintenance freshly performed -The variable speed screw compressor NOBEL with 'DNair2' microprocessor control is already factory-prepared for the SMS module (optionally available under: 9062744) -The controller communicates in plain text; all important operating states can be read directly. -The controller has an RS 485 interface Features: Thermal control valve compressor block POWERSYSTEM separate radial fan, temperature controlled for optimal cooling Hjdjqd Uvuepfx Addjng Very good accessibility for all maintenance work Rotation direction monitoring using phase sequence relay without dryer, standard with galvanized cyclone separator tank Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Motor kW/HP: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 Kg The machine can be demonstrated on site under power if desired. All information without guarantee Errors and prior sale excepted Sale EXW free loading from warehouse Hessisch Lichtenau. Sale exclusively to commercial buyers, excluding any liability for material defects. Liability for damages resulting from injuries to health, body, or life and grossly negligent and/or intentional breaches of my duties as a seller remains unaffected. This offer is exclusively aimed at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.

Condition: good (used), Year of construction: 2017, overall weight: 403 kg, volume flow: 199.2 m³/h, pressure (max.): 10 bar, PROD. - CHICAGO PNEUMATIC TYPE - CPVS25 S/N - ITJ109435 YEAR - 2017 CAPACITY (kW) - 18.5 OUTPUT (m3/min) - at 7.5 - 3.32, at 8.5 - 3.14 , at at 10 - 2.92 CIS (bar) - 10 Hnodporb A Sfsfx Addjg INVERTER - yes