Used Screw Type Compressor for sale (41,137)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 42,000 h, functionality: fully functional, overall weight: 3,315 kg, total length: 3,200 mm, total width: 1,630 mm, total height: 1,960 mm, motor manufacturer: Siemens, power: 236 kW (320.87 HP), volume flow: 3,013 m³/h, operating pressure: 4 bar, noise level: 77 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 1 unit Low-Pressure Screw Compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3,013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3,630 rpm Speed control: with integrated frequency converter Cooling: Water-cooled with stainless steel shell-and-tube heat exchanger FUNKE 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Ksdpoywr Tksfx Al Nslu Dimensions Length: 3,200 mm Width: 1,630 mm Height: 1,960 mm Weight: 3,315 kg Also available: Cyclone Afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain Bekomat Shell-and-Tube Heat Exchanger Manufacturer: Funke Model: A100 805-6-1Pass Material: Stainless steel 2x Rubber Expansion Joints 1x Intermediate Flap Valve DN 150 with Auma Actuator SG 05.1 F07 1x Cooling Water Control Valve Samson 3274 DN 50 PN 16 1x Steel Pipe DN 150 with 2x 90° bends

Condition: used, Year of construction: 1998, operating hours: 80,000 h, functionality: fully functional, overall weight: 6,550 kg, total length: 3,700 mm, total width: 2,120 mm, total height: 2,400 mm, motor manufacturer: Siemens, power: 315 kW (428.28 HP), volume flow: 46 m³/h, operating pressure: 10 bar, noise level: 72 dB, type of cooling: water, Equipment: documentation/manual, type plate available, 2 screw compressors with special voltage of 6000 Volts Manufacturer: Atlas Copco Model: ZR 315-10-50/E Operating pressure: 10 bar Volume flow: 46 m³/min Year of manufacture: 1998 Klsdpfxsywcr Re Al Nou Operating hours: approx. 80,000 hours Cooling: water-cooled Motor manufacturer: Siemens Power: 315 kW Speed: 1482 rpm !!! Voltage: 6000 Volts !!! Dimensions: Length: 3700 mm Width: 2120 mm Height: 2400 mm Weight: 6550 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, 4 Aerzen VM 30 Screw Compressors Previously used for pneumatic unloading of railway wagons. Manufacturer: Aerzen Model: VM 30 Volume flow rate: 27.17 m³/h (1630.2 m³/min) Pressure increase: 2.75 bar Compressor speed: 12,874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C The compressed air is cooled with water via a shell-and-tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2,800 mm Width: 1,150 mm Klodpfxerkpp He Al Nju Height: 1,770 mm Weight: approx. 2,750 kg Operating hours: Compressor 1: 28,109 hours Compressor 2: 28,222 hours Compressor 4: 28,973 hours Regular servicing was carried out by an authorized service company!! Units have not been in operation since 2019. Since then, they have been stored in a dry, heated location.

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Klodpfx Aoyb Sdiol Nsu Good working condition

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Klodpoyy U Shjfx Al Nou Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Kodjzb Idrjpfx Al Nolu Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Ksdpfx Aloy Ry E Us Nelu Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Industrial air systems Compressor refurbishment specialists Spares or parts use Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Condition: used, Plant from spiral freezer. Kjdpfx Alsvvm Afe Nslu

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Klsdpeuqckksfx Al Neu Serial: 2268 2010, 2.2Kw, 11.0Bar, 3Ph

Condition: good (used), Year of construction: 2010, Kaeser SX3T Compressor Serial: 2266 Kedpfx Aleuqckdo Nslu 2010, 2.2Kw, 11.0Bar, 3Ph

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Kedozf Ivuopfx Al Njlu Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Kodpjzfzagefx Al Njlu Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581 Klsdpfok Sgwaox Al Neu

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Bar: 10 Tank: 200 L Year: 2006 Ksdpfx Alsi Eq D Dj Nslu

Condition: used, Year of construction: 1996, operating hours: 21,843 h, functionality: fully functional, machine/vehicle number: 3110533, overall weight: 490 kg, total length: 1,420 mm, total width: 856 mm, total height: 1,085 mm, power: 18.5 kW (25.15 HP), fuel type: electric, operating pressure: 8 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The KAESER AS31 compressor from 1996 is a reliable model designed for various industrial applications. This oil-lubricated compressor delivers efficient performance thanks to its high-quality manufacturing, reflecting KAESER's expertise. This model is ideal for companies looking to optimize their production with durable equipment. Although this model is used, it retains its robustness and efficiency, which are essential characteristics of KAESER compressors. The AS31 model is designed to offer ease of use and minimal maintenance, ensuring a long service life under demanding working conditions. This compressor is distinguished by its ability to deliver a constant airflow, suitable for the diverse needs of industrial facilities. The equipment has been carefully inspected to ensure that it meets quality and safety standards. It is a cost-effective option for those who want to benefit from KAESER's reliability at an attractive price. Ksdjxn I T Eopfx Al Nelu

Condition: used, Year of construction: 1999, operating hours: 25,874 h, functionality: fully functional, machine/vehicle number: 1066, power: 30 kW (40.79 HP), final compaction pressure: 10 bar, Equipment: compressed air system, compressor, The Kaeser BS 51 lubricated compressor is a robust machine, ideal for numerous industrial applications requiring reliable and consistent compressed air. Capable of operating at a maximum pressure of 10 bar, it is equipped with a powerful 18.5 kW motor, ensuring optimal performance even under demanding conditions. This used model, while offering excellent performance, provides an economical solution for those seeking a more affordable alternative to new equipment. Designed by KAESER, a company renowned for its high-quality compressors, the BS 51 combines energy efficiency, durability, and low maintenance costs. Klsdpfx Alezb Izqo Neu In summary, the Kaeser BS 51 compressor meets the needs of a wide range of industries. Its ability to maintain stable operation under high pressures makes it an essential tool for various applications.

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Ksdpfxevyutge Al Nelu prior sale!

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t Kodpfeym Tx Sjx Al Nelu

Condition: used, Year of construction: 1997, feed pressure 10 bar liter capacity 1500 l Number of working hours 5111 h total power requirement 11 kW weight of the machine ca. 250 kg Kodpfx Aleid S Tre Nolu

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 30371, fuel type: electric, volume flow: 18.4 m³/h, operating pressure: 8 bar, Equipment: type plate available, Technical condition: Kedpfx Aljzf Enhj Nelu Electrical system, year of manufacture 2017 Drive type: Three-phase motor Drive power: 110 + 4 kW Drive speed: 3000 rpm Operating voltage: 400 V Frequency: 50 Hz Electrical control cabinet: present Additional data: Volume flow: 18.40 m³/min Compression pressure: 8 bar

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 385 kg, power: 5.5 kW (7.48 HP), volume flow: 58 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, We are offering this used Airpol KT5 screw compressor, manufactured in 2021, for sale. Manufacturer: Airpol Model: KT5 Serial number: 521271821 Kedpfx Ajzdy T Aol Nelu Year of manufacture: 2021 Air output: 58 m³/h Overpressure: 8 bar Power: 5.5 kW Weight: 385 kg Power supply: 400 / 50 V/Hz The compressor was used in our production facility in Poland, which we have since closed. It has been well maintained. Maintenance was performed in 2022, 2023, 2024, and 2025. It can be inspected and tested during our regular business hours at our production facility in Mönchengladbach. If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2020, Offered here is a complete compressed air system with the following components: 1x screw compressor Kaeser SK 22 (Year 2020) 1x screw compressor Kaeser SK 19 (Year 1995) 1x refrigerated dryer Kaeser TB 26 (Year 2016) 1x air receiver Kaeser 500 l (Year 1986) Klodjy Ndagjpfx Al Nou The system and individual components are in very good condition. Location: ex customer site (Saarland) - available at short notice by arrangement -

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Rated power: 5.5 kW Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Kljdpfx Ajzf Ihqsl Nju Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: good (used), Year of construction: 2016, 2x screw compressors, Kaeser, 10 bar, with integrated refrigerant dryer, compressed air tank, SIGMA AIR MANAGER 4.0 control system – used: Price per compressor, ex-works: €5,950 (net), dismantled, packaged, and loaded! Kledpfszbyd Rox Al Nju Price for the compressed air tank, ex-works: €1,450 (net), dismantled, packaged, and loaded! SIGMA AIR MANAGER 4.0 main control system, price ex-works: €2,500 (net)! Price for the complete system (2x compressors, 1x compressed air tank, 1x SIGMA AIR MANAGER 4.0 control system) = only €13,500 (net)! Manufacturer: Kaeser Type: SK 25 T Year of manufacture: 2016 Serial No.: 7201 Material No. SK.2 Operating hours: unknown, will be provided later Rated power: 15.0 kW Motor speed: 2,960 1/min Max. operating overpressure: 11.0 bar Dimensions (according to manufacturer's data sheet) W x D x H (mm) 750 x 1240 x 1260 Option K1 T2 C3 Option K1: Special coolant filling Option T2: Transformer / voltage adjustment Option C3: Connection of the control system (Sigma Control 2) to higher-level control or remote monitoring systems SIGMA AIR MANAGER 4.0 main control system: Control of compressed air stations – for optimum efficiency. Adaptive, efficient, and networked – with the SIGMA AIR MANAGER 4.0, demand-oriented compressed air management gets a new name. The compressed air management system controls the operation of several compressors as well as dryers or filters with unprecedented efficiency. Compressed air tank (data still to be verified) Kaeser, 1000L, max. operating pressure: 11 bar Condition: good Available: from Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Klodpfxowrrgme Al Neu Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.