Used Screw Tap for sale (6,245)

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Bsdpfx Afey Ecuzskown Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 1996, operating hours: 25,000 h, condition: good (used), functionality: fully functional, single-screw extruder, 90 Reifenhauser, complete with electrical panel and 200 kW motor. Bwedpfx Aezbh Ahefksn The machine is in excellent condition.

Condition: used, Year of construction: 2014, operating hours: 53,000 h, machine/vehicle number: APF 194907, pressure (max.): 7.5 bar, rotational speed (max.): 1,485 rpm, TECHNICAL DETAILS Maximum operating pressure: 7.5 bar Input power: 355 kW Shaft speed: 1,485 rpm Bsdpfx Afoy Ia R Sekswn MACHINE DETAILS Operating hours: 53,000 h EQUIPMENT Atlas Copco air dryer, model: MD1000 W CE Maximum operating pressure: 10.5 bar Year of manufacture: 2014

Condition: used, Year of construction: 2017, operating hours: 26,400 h, machine/vehicle number: TRD128834, overall weight: 4,840 kg, power: 200 kW (271.92 HP), volume flow: 3,600 m³/h, operating pressure: 8 bar, TECHNICAL DETAILS Pressure: 8 bar Bwsdpfxoy Ia D So Afksn Volume flow: 3,600 m³/h MACHINE DETAILS Voltage: 400 V Frequency: 55 Hz Noise level: 79 dB(A) Motor manufacturer: ABB Motor power: 200 kW Motor speed: 2,983 rpm Total weight: 4,840 kg Operating hours: 26,400 h

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Bwodpfx Afsy H Id Reksn Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Screw Compressor GX5FF EP Main Technical Data (10 bar version): Motor Power: 5.5 kW (7.5 HP) Operating Pressure (max.): 10 bar (e) / 145 psi Free Air Delivery (FAD):* approx. 10.0 l/s to 10.1 l/s Sound Pressure Level: approx. 64-66 dB(A) (very quiet due to soundproof enclosure) Cooling System: Air-cooled Duty Cycle: 100% (suitable for continuous operation) Features & Dimensions (Full Feature - FF): Integrated Refrigerant Dryer: Yes (R134a) Bwodjy H D R Hspfx Afksn Tank Size: Mostly mounted on 200L or 500L tank (typical in 2015) Dimensions (approx.): 1430 mm x 665 mm x 1260 mm (tank-mounted) Weight: approx. 198 kg - 310 kg (depending on tank size) Connection: 1/2" G

Condition: used, overall weight: 398 kg, total length: 500 mm, total width: 500 mm, total height: 820 mm, Clamping cube with Roemheld hydr. Screw in module Mounting holes 4 Pitch fixing holes 320 mm Pitch Roemheld module 170 mm Top to first module 120 mm Bwsdpfjywzamox Afksn Length 500 mm Width 500 mm Height 820 mm Weight 398 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2021, operating hours: 19,278 h, PROD. ATLAS COPCO TYPE GA75VSDFF PLUS S/N 01822 API 869367 YEAR 2021 Bsdpfxezachis Afkjwn POWER (kW) 75 CAPACITY (m3/min) 13.5 DISCHARGE PRESSURE (bar) 12.75 HOURS (RUNNING/TOTAL) 19278 VARIABLE SPEED DRIVE yes BUILT-IN DRYER yes, R410a 1.45 kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no NEW/USED USED

Year of construction: 1998, condition: used, Manufacturer : Clextral Model : BC 45 Bwjdeyzt Ukopfx Afken Year : 1998 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion AC motor: 25 kW Length of screw/barrel: 1800 mm Screw elements: nominal diameter 55 mm. L/D : 33 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Year of construction: 1990, condition: used, Manufacturer : Clextral Model : BC 45 Year: 1990 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire DC motor: 21 kW Bedpfx Afoyzt Udskown Length of screw/barrel: 1500 mm Screw elements: nominal diameter 55 mm. L/D : 27 Included in the package: Granulator, water pump and control panel Peripheral equipment not included but available on request: Dosing unit. (Its integration may be subject to a feasibility study and a supplementary quotation.)

Condition: excellent (used), Year of construction: 2023, volume flow: 1.6 m³/h, pressure (min.): 13 bar, ALUP EVOLUTO 11 screw compressor Variable speed (inverter controlled) 11 kW motor Capacity: 1.60 m3/min Bodpfx Afey Uwvfjkown Pressure: 13 bar Year of manufacture: 2023 Operating hours: 3969 Compressor has undergone maintenance. Net price: 17,500 Gross price: 21,525 Compressor is in perfect working order.

Condition: excellent (used), Year of construction: 2013, volume flow: 2 m³/h, pressure (min.): 8 bar, MARK MSA 15 screw compressor 15 kW motor Capacity: 2.00 m3/min Pressure: 8 bar Year of manufacture: 2013 Net price: 8,500,- Gross price: 10,455,- Bwjdpfx Afey Uwi Eoksn Compressor is in fully working condition.

Condition: excellent (used), Year of construction: 2011, volume flow: 3.55 m³/h, operating pressure: 10 bar, pressure: 13 bar, ALMIG VARIABLE 20 screw compressor Variable speed (inverter-controlled) 20 kW motor Capacity: 3.55 m3/min Pressure: 13 bar Bedpfxoy Uwfto Afkjwn Year of manufacture: 2011

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. reactions or questions ? please with full name, company name and phone number. Bodpst Iwt Uofx Afkswn

Condition: excellent (used), Year of construction: 2011, volume flow: 2.62 m³/h, operating pressure: 10 bar, pressure: 10 bar, RENNER RSKF 18.5 SCREW COMPRESSOR Variable speed (inverter-controlled) 18.5 kW motor Capacity: 2.62 m3/min Pressure: 10 BAR Year of manufacture: 2011 Operating hours: 11,230 hours MACHINE IS IN FULLY WORKING CONDITION. Bwodpjy Ur Agjfx Afken

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: A11 702998, Equipment: type plate available, Compressor unit with pressure vessel, air dryer, and additional accessories Bodpfxsxvidno Afkown

Condition: excellent (used), Year of construction: 2011, operating hours: 50,496 h, functionality: fully functional, Screw Compressor Atlas Copco GA11VSDFF Integrated frequency converter and dryer 11 kW 12.75 bar 1.84 m3/min Year of manufacture: 2011 Bjdpfx Asy Ipcwjfkown Operating hours: 50,496

Condition: ready for operation (used), Year of construction: 2009, ALMiG Screw Compressor BELT 30-10 | 30 kW | 10 bar | Industrial Quality For sale is a powerful and reliable screw compressor from ALMiG (Made in Germany) – ideal for industry, production facilities, or larger workshops. Technical data: Manufacturer: ALMiG Kompressoren GmbH Model: BELT 30-10 Bwjdpfxoy E Uhys Afkon Year of manufacture: 2009 Motor power: 30 kW Operating pressure: 10 bar Volume flow: 4.12 m³/min Drive: Belt drive

Condition: like new (used), Year of construction: 2020, operating hours: 2,255 h, ABAC Spinn 5.5x screw compressor with drier and tank Year: 2020 Technical details: Max Working Pressure (Bar) 10 Bar Max Working Pressure (psi) 145 PSI FAD capacity (l/min) 696 l/min FAD capacity (cfm) 24.6 Cfm Bwedpjy Ui Sxjfx Afksn Motor (hp) 7.5 Hp Motor (kw) 5.5 kW Noise Level 64 dB(A) Supply voltage 400 V Frequency 50 Hz Number of phases 3 Oil capacity 3.2 Liter Dimensionals product Length 850 mm Height 980 mm Width 720 mm Weight 172 kg With ABAC Dry 130 air drier and with 270 liter tank Working hours: only 2255 hours

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t Bwedpfsfg U Tiox Afkjn dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min Bwodefg U Tnjpfx Afkjn transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: excellent (used), 1 used, very well-preserved thread cutting chuck M 14-30 for cutting internal threads on switchable drilling machines, lathes and milling machines. Can be used horizontally and vertically Brand: BILZ, Origin Germany Model: DSPL 30-MK4 • With Morse taper shank and tang according to DIN 228 B • With patented double chuck (clamps shank and square) • Elastic length compensation for compression and tension • Axis-parallel pendulum device and elastic length compensation for cutting precisely aligned threads • With clockwise and counterclockwise rotation Technical specifications: Suitable for threads M 14 - 30 Morse taper size Mk 4 Clamping range diameter min. 11 mm Clamping range diameter max. 23 mm Axis length compensation 30 mm Protrusion length 230 mm Axis-parallel compensation 2 mm Bedpfx Ajwimm Njfkjwn Weight 12 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2012, operating hours: 3,195 h, functionality: unexamined, machine/vehicle number: 1029, overall weight: 405 kg, total length: 1,130 mm, total width: 780 mm, total height: 1,255 mm, space requirement length: 1,130 mm, space requirement width: 780 mm, space requirement height: 1,130 mm, motor manufacturer: Kaeser, power: 18.5 kW (25.15 HP), fuel type: electric, volume flow: 3.15 m³/h, operating pressure: 8 bar, pressure (min.): 7 bar, pressure (max.): 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Equipment: documentation/manual, type plate available, For sale is a reliable and powerful Kaeser ASK 32 screw compressor with Sigma Control 2 from the year 2012. The machine is in good used condition and has been regularly maintained. Ideal for workshop, trade, or industrial use. Technical data: Manufacturer: Kaeser Model: ASK 32 Sigma Control 2 Year of manufacture: 2012 Screw compressor Control system: Sigma Control 2 Bwjdpfsy Rzmaox Afkon Powerful and energy-efficient Immediately ready for use The compressor is running and can be inspected and tested by appointment.

Condition: ready for operation (used), L&Z Lathe MONDIALE LALLIC 16 N / incl. Acurite / 3-axis digital readout - Centre height: 165 mm Bedpfx Asy N Eciefkjwn - Swing over bed: 325 mm - Distance between centres: 1000 mm - Spindle bore approx. 42 mm - 3-axis digital display ACU-RITE - Speed range: 45–2000 rpm - Automatic longitudinal/cross feeds - Tailstock Morse Taper 4 - Thread cutting: metric / imperial etc. - Quick-change toolholder - Three-jaw chuck - Electrical chuck guard - Chip backsplash Dimensions: L×W×H 2.1×1.2×1.6 m / Weight: 1700 kg Errors and omissions excepted.

Year of construction: 1999, condition: used, Manufacturer : Clextral Bwsdpfsyy S Iyex Afkon Model : EVOLUM+ 53 Year : 1999 Type: Twin-screw extruder Précédente application : Cuisson-Extrusion agroalimentaire AC motor: 130 kW Length of screw : 2120 mm Screw elements: nominal diameter 53 mm. L/D : 40 Barrels : 10 units Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.) A wide range of applications: fish feed, pet food, snacks, meat substitutes…