Used Seam Welder for sale (601)

Condition: used, SAF Seam Welder arm approx 4.3 m long. with SAF Nertamatic 300 TR Control, plasma TIG . Hsdpfozh Rdysx Ahaot

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Outreach 670mm - Arm spacing 350mm - Electrode force 500daN - Stroke approx. 30mm - Control unit TE500 with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function - Language selection: German, English, Italian, French, etc. with operating manual - 2-stage foot switch according to UVV standards - Main machine switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with wiring diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately Hsdjzh Izcopfx Ahajt - Spot welding fixture / electrode holder and lower arm available at an additional cost The system is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed based on actual effort.

Condition: good (used), functionality: fully functional, Length 4.000mm, max diam 1,500mm Hedpswtp Ttsfx Ahaet

Condition: excellent (used), functionality: fully functional, 400 Amp power source, 2,500mm, Hedpfx Ahjwtp Svsaet

Condition: good (used), Year of construction: 2020, functionality: fully functional, working width: 3,700 mm, welding power (max.): 2,200 kVA, wire diameter (max.): 25 mm, type of input current: three-phase, 1. EVG QC76/144-ZL/PV Wire Mesh Welding Line Description EVG High-Performance Mesh Welding Line - Type QC76/144-ZL/PV · Max. Sheet Width: 3,700 mm (Welding width: 3,600 mm) · Sheet Length Range: 1,500 mm – 12,000 mm · Wire Diameter Range: Line wire (6 – 25 mm) / Cross wire (6 – 16 mm) · Max. Working Speed: 90 CW (cross wire) / min. · Line Wire Spacing: 75 mm – 1,000 mm (Steplessly programmable) · Cross Wire Spacing: 50 mm – 2,000 mm (Steplessly programmable) · Number of Line Wires: Max. 33 wires · Input Material: Pre-cut and straightened line and cross wires (Cold-formed/Hot-rolled) · Power Rating: 2,200 kVA (Driving power: 120 kW) Hjdpfx Ahoy Aig Ssast Key features · Versatility: Optimized for the economic production of special sheets and engineered fabric, even for the smallest lot sizes. · Precision: Features steplessly programmable spacing for both line and cross wires, allowing for highly customized mesh designs. · Heavy-Duty: Capable of welding large diameter wires (up to 25 mm), suitable for structural and industrial applications. · Automation: Advanced cascade welding system (automatic) for efficient multi-diameter operations. 2. EVG DRE16 Wire Straightening Machine Description EVG DRE16 High-Speed Wire Straightening and Cutting Machine · Wire Diameter Range: 8 mm – 16 mm · Max. Feed Speed: 160 m/min. · Max. Wire Strength ($Rp0.2): 600 N/mm2 · Driving Power: 85 kW · Power Supply: 380 V, 60 Hz, 3ph · Color: RAL 7001 (Grey) / RAL 3011 (Red) · Standard Compliance: EN 60204-1, IEC 60364-4-41 TN-C Key features · High Productivity: Offers a superior straightening speed of up to 160 m/min, ensuring high throughput for downstream welding lines. · Material Compatibility: Specifically designed to handle high-strength wire up to 600 N/mm2. · Reliability: Built with EVG’s renowned precision engineering for consistent straightening quality and long-term durability. * Machine can be seen in factory.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, Equipment: documentation/manual, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Supports – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: Like new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 liters Total volume: 33,213 liters Product contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and guidelines: • PED 2014/68/EU compliant • CE marking available • GMP-compliant pharmaceutical design Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20°C to +50°C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT carried out including: • Dimensional, visual, and identification inspection • Weld seam testing and NDT • Pressure test according to PED • Testing of all connections • Documentation and quality inspection FAT successfully completed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Interior surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measuring, safety, and process connections Hsdpfx Asykngfjhaet Mechanical configuration: • Original BRINOX stainless steel saddle supports included • Heavy-duty design • Lifting points for crane handling present CONDITION • Absolutely as new • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle supports are also as new and included in delivery. DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation including: • EU Declaration of Conformity and CE documentation • PED certificates • Material certificates EN 10204 – 3.1 • Welding documents (WPS/WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Part drawings and parts lists • Operation and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging provided • Original industrial packaging • Crane handling possible without issues • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new-build project with complete FAT, PED compliance, and GMP documentation. Large-capacity BRINOX 30,000 L pharma process vessel in as-new installation quality, incl. saddle supports – immediately available.

Condition: used, machine/vehicle number: 12304, functionality: fully functional, actuation type: electric, Equipment: rotational speed infinitely variable, For sale is a high-quality and robust industrial bandsaw, manufacturer THIEL SEGURA 117. The machine is produced by Gebrüder THIEL GmbH, Sand near Kassel, and impresses with its solid construction and classic German industrial quality. Technical data (according to nameplate): Model: THIEL SEGURA 117 Machine ID: 12304 Machine Specifications Wheel diameter: 300 mm Throat: 450–500 mm Max. workpiece height: 220 mm Table size: 600 × 600 mm Tilting table: yes, partially in 2 directions Saw blade length: 3350 mm Saw blade width: approx. 10 mm Blade speed: 15 – 125 m/min or 125 – 1000 m/min partially infinitely variable Weight: approx. 700 kg Hedpfx Aoy Sf Udehast Dimensions: approx. 1.0 × 0.7 × 1.8 m Equipment: -integrated bandsaw blade welder (IDEAL BS00) -grinding stone for deburring the weld seam -infinite speed control All technical data without guarantee.

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, Equipment: type plate available, manufacturer: PECO N30 Hedpfxoxlr Tde Ahast rated power: 40/80 kVa KB 1970 production can weld in 2 directions rather water cooled, air operated Kb 32 A can weld 500mm in length voltage: 380v 50 Hz

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – Like New Hjdpoylnwyefx Ahaet Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Product Type: Storage / Process Tank Nominal Volume: 3,500 litres Total Volume: 4,082 litres Jacket Volume: 226 litres Empty Weight: approx. 1,760 kg Product-contacting Material: 1.4435 (AISI 316L pharmaceutical grade) Jacket Material: 1.4404 CE Marking: CE 0036 Permissible Pressure PS (Tank): -1 / +3 bar Permissible Pressure PS (Jacket): -1 / +6 bar Test Pressure PT (Tank): 5.6 bar Test Pressure PT (Jacket): 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Designed in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design review, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully inspected and released by the manufacturer. Tests carried out include: • Pressure test as per PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing check (as-built) • Review of material certificates • Calibration check of manometers • Verification of markings • Documentation review as per inspection checklist Full FAT and TÜV inspection reports available. EXECUTION • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-quality pharmaceutical design • Manhole with round pressure closure • CIP pipework • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – complete and well-structured • EU declaration of conformity • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Manometer calibration reports • Surface and production reports • Parts list • Detailed drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never put into operation • Was in storage • Interior surface as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and waste management plants SPECIAL FEATURE Premium BRINOX pharmaceutical-grade manufacture with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: Like New / Unused Technical Data Product Type: ELUTION / Solution Tank Volume: 3,200 liters Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Tank Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20°C to +150°C Pressure vessel according to PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (Identification No. 0036) Permitted Number of Load Cycles: 7,300 / 5,475 at pressure fluctuation ranges of 3.3 / 4.5 bar TÜV / PED / FAT • EU Certificate of Conformity according to 2014/68/EU • Certificate No.: Z-EU-SI-LJU-20-08-2350154-14124056 • Inspection report available • Pressure test with water successfully completed • Approval by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual acceptance • Turn-Over Package (TOP) fully available Complete Documentation Available The complete technical documentation package is available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Nameplate documentation • Assembly drawings • Detailed drawings • Welder lists and weld process qualifications • Work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gases Hodoykkbxjpfx Ahaet • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Roughness protocol • Surface treatment report • Operating and maintenance manuals (equipment and components) The documentation scope meets project standards for pharmaceutical plants. Design Features • Double jacket for heating and cooling • Manufactured entirely from stainless steel 316L (1.4404) • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes / inspection openings • Clamp and flange connections • Instrumentation pre-installed (pressure, temperature, sensors) • Heavy-duty project design • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media Special Feature This is not a standard tank, but a high-quality BRINOX project-built vessel in genuine pharmaceutical quality featuring: • PED Module G individual inspection • TÜV SÜD approval • FAT performed • Complete welding, material, and inspection documentation • Documented surface treatment • 316L construction for sterile applications Project quality for demanding GMP applications – immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,200 l, Equipment: documentation/manual, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Elution / Solution Vessel Volume: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: available (CE 0036) Vessel pressure: Operating pressure: -1 / +3 bar Test pressure: As per TÜV inspection Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: As per TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Single unit inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test The vessel was tested as part of a documented FAT. The tests included, among others: • Verification of welding documentation • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness inspection • Sensor calibration check • Layout and dimensional inspection • Documentation review The complete FAT report including test protocols is available. SPECIFICATION • Double jacket for heating/cooling • Entirely made of stainless steel 316L • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation ready (pressure, temperature, sensors) • Heavy-duty project construction • Lifting lugs for crane handling CONDITION • Never used in production • Surplus stock from project overrun • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available DOCUMENTATION – complete and structured Comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (NDT) • Analysis certificates for welding consumables and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy check Hodpfx Aoykkhrohaet • Internal pressure test • Calibration certificates • Assembly records • Drawings (detail and overall) • Operating and maintenance manuals Complete documentation file available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project build in true pharmaceutical quality with verified pressure design, full PED conformity (Module G), documented FAT testing, and comprehensive quality documentation. Project-level quality for sterile applications – available immediately.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical manufacturing facility. Suitable for preparation, storage, and dispensing of process solutions in GMP environments. Construction and Equipment - Cylindrical stainless steel tank in horizontal configuration - Front-end process connections - Large manway with pressure lock - Integrated CIP (Cleaning-In-Place) system with spray ball - Highly polished internal surfaces - Hygienic product-contact connections - Multiple instrumentation and sensor nozzles - Documented weld seams with full traceability - Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and attachments present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Inspection of Welding Documentation”, weld documentation was inspected during the Factory Acceptance Test (FAT 01, 23.10.2020). The following were confirmed, among others: - Identification of welders and weld inspectors - Welder qualifications according to EN ISO 9606-1 - WPS and WPQR documentation - Proof of shielding gas suitability - Documented test welds - Visual spot checks with no findings - Traceability according to material certificates 3.1 The complete weld documentation is part of the Turn-Over-Package. Documentation – Fully Available - FAT plan and FAT report - Layout and construction drawings - P&ID diagrams - Calibration protocols - Surface finish and roughness tests - Leak test Hedpjykkk Hefx Ahaet - Welding plan - WPQR - WPS - Welder qualifications - Borescope inspection report - Incoming goods inspection reports - Sensor calibrations The complete technical documentation is available digitally. Special Features - Fully documented GMP configuration with certified welding documentation and extensive quality package - Ideally suited for reinstallation in pharmaceutical plants or environments requiring validated applications.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 9,000 l, Equipment: documentation/manual, BRINOX 9,000 L Wash Solution Tank – 316L – Jacketed – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year: 2020 Condition: As new / unused Technical Data Product type: Wash solution tank Nominal volume: approx. 9,000 litres Wetted material: 1.4404 (AISI 316L) Design: Horizontal layout CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polish • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Custom-built in 316L stainless steel • Large manway with pressure closure • Integrated CIP spray nozzles / cleaning pipes • Multiple clamp and flange connections • Instrument ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy-duty industrial design Hsdpfx Ahoykkiveast • Pre-installed external piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, the clean welding, and the mirror-polished product-contact internal surface. Condition • Never used in production • Inventory stock from project surplus • Absolutely clean interior • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production systems • Sterile liquid processes Documentation – fully available and structured Comprehensive, project-specific quality and manufacturing documentation included, such as: • EU declaration of conformity and warranties • Reports and EU component verifications • Assembly documents • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welder lists, welding procedure qualifications, samples • Analysis certificates for welding filler material • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Surface roughness report • Surface treatment report • Operating and maintenance manuals (unit) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation package available digitally. Special Feature This is not a standard tank, but a premium, custom-built unit in genuine pharmaceutical quality with certified pressure design, documented manufacture, and full PED compliance including TÜV acceptance. The heavy-duty construction, large connections, and CIP integration make this vessel ideal for demanding GMP applications.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6723-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Fill Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-fill / process vessel Nominal volume: 1,000 L Total volume: 1,400 L Net weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test in accordance with Annex I No. 3.2.2 carried out Acceptance without deviations Permissible load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete works FAT carried out: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional inspection • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. DESIGN • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manhole DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • For pressurised and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with inspection report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welders’ lists • NDT reports • Surface roughness protocols • Internal pressure test • Measurement reports • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation Hjdpfx Asykqmzjhast • Sterile liquid processes • GMP installations • Biotechnology High-quality BRINOX pharmaceutical specification with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – tested project quality. Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, tank capacity: 3,500 l, Equipment: documentation/manual, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial number: 1003460 Year of manufacture: 2020 Condition: As new / unused BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 Hedeylng Ujpfx Ahajt CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel according to PED 2014/68/EU Category III Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and approved at the factory. Tests carried out, among others: • Pressure test per PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT according to test plan) • Dimensional and drawing comparison (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Marking verification • Complete documentation review Full FAT protocols available. DESIGN • Cylindrical, horizontal vessel • Double jacket with half-pipe system • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade welds • Manway DN 500 • Powder/product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature connections • Agitator connection • Heavy-duty trunnion supports • Lifting lugs DOCUMENTATION – complete and structured Extensive project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and guarantee certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding filler materials and gas • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy test report • Internal pressure test report • Calibration certificates • Reports and EU conformity of installed components • Parts list compilation • Detail drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical fabrication with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and fully documented FAT inspection. Not a standard tank – this is audited project quality with comprehensive GMP-compliant documentation.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: BH6721-BH1001, tank capacity: 1,000 l, Equipment: documentation/manual, BRINOX 1,000 L Pre-Filling Tank – 1.4435 – Double Jacketed – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial No.: 1003453 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal volume: 1,000 liters Total volume: 1,400 liters Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE Marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design according to AD 2000 code Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified Body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent full FAT testing and approval at the manufacturer’s site. Tests carried out include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Verification of markings • Complete documentation review FAT protocols fully available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss product contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator port (DN 200) • Multiple spare ports • Heavy-duty trunnion/pivot bearing • Transport and lifting devices DOCUMENTATION – fully complete and well structured Comprehensive, project-specific quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design test and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol Hsdpfx Aeykpqrshaet • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates for pressure gauges • Reports and EU conformity of installed components • Parts list assembly • Component drawings • Operating and maintenance manuals Complete digital documentation portfolio available. CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharma-manufacturing with complete PED Module G individual acceptance by TÜV SÜD, CE 0036 marking, and full FAT test documentation. Not a standard tank, but a quality project vessel with comprehensive GMP-compliant documentation. Immediately available.

Condition: ready for operation (used), Has been used for welding round seams on PTO shafts. Can be used for many other round items. Adjustable speed on motor. Can run automatically with signal to welder. Can run 1 lap or continuously. Max workpiece length 1600 mm. Can be extended very easily. Transport can be arranged. I also have a C-press with lots of different dies for aligning many types of shafts, solid and tubes. Hjdpfshwhnyox Ahaet I also have welders in different sizes and types.

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m Hedpfx Ajymautohast - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: new, functionality: fully functional, Lorch Cobot Welding World – flexible welding automation for small and medium-sized businesses Automate economically, produce more efficiently: The Lorch Cobot Welding World offers a simple and cost-effective entry point into collaborative robotic welding. The modular complete solutions are particularly suitable for small and medium-sized series, changing components, and recurring welding tasks. The welder remains responsible for the process, while the cobot executes programmed sequences precisely and reproducibly. This relieves employees from monotonous and physically demanding tasks, while productivity, process reliability, and welding quality increase. Compared to classic industrial robot solutions, the cobot concept offers greater flexibility and comparatively low investment costs. Individually configurable product portfolio: With the myCobot system, the system can be assembled to suit the respective manufacturing task. Solutions for MIG-MAG and TIG welding, powerful Lorch power sources, coordinated cobot torch systems, and the UR12e from Universal Robots are available. The intelligent Lorch Cobotronic software enables intuitive programming and user-friendly operation – also ideal for companies without extensive robotics expertise. The portfolio includes, among other things: - Lorch IQS for state-of-the-art MIG-MAG welding with the highest weld seam quality, innovative technology, and maximum process performance - Lorch S-RoboMIG XT for economical MIG-MAG welding with high reliability and excellent quality - V-RoboTIG for precise and visually high-quality TIG welds - Linear axis Cobot Move for expanding the work area - Rotary tilting table Cobot Turn 100 A for optimal positioning and rotation of workpieces - Cobot SeamPilot for automatic detection and tracking of the weld seam path - Functions such as SmartCopy, TouchSense, SeamTracking, weaving, and AVC Hjdpfjruml Sox Ahast Complete solution including service: Lorch and qualified cobot partners support the project holistically – from application consulting and configuration to assembly, installation, and commissioning, as well as operator training. The solution is ideal for metal construction, mechanical engineering, contract manufacturing, and industrial production companies that want to increase their capacity, relieve skilled workers, and achieve consistently high-quality welding results. Flexible financing, efficient automation: In addition, financing, leasing, and rental models are available so that users can benefit from a practical, quickly integrable, and future-proof automation solution with flexible financing options. New – Cobot generation UR8L – more reach and flexibility: With the UR8L, Lorch expands the Cobot Welding World to include a powerful welding robot for larger and longer components. Its reach of 1,750 mm, a payload capacity of 8 kg, and the compact wrist enable excellent accessibility – even for demanding workpiece geometries and confined working areas. Doc 1: Cobot brochure (DE) Doc 2: Cobot brochure (EN) Doc 3: Technical details MIG/MAG Cobot (DE) Doc 4: Technical details MIG/MAG Cobot (EN) Doc 5: Technical details TIG Cobot (DE) Doc 6: Technical details TIG Cobot (EN)

Condition: used, TUBE MILL OTO MILLS 219.10 Hjdjym Dbdspfx Ahaot The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Condition: new, Year of construction: 2005, functionality: fully functional, Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Weld Control Easy to use programming interface For controlling and integrating projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer Appliances Nuts and Studs Projection Welding Electronics and Automotive Parts Aerospace Parts Office Furniture Automotive Sheet Metal Input Power: 230-460 VAC Output Range: 1000-80,000 A Phase: Single Welding Period Range: 0-99 Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Welding Controller Easy to use programming interface Used to control and integrate projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer appliances Nuts and studs projection welding Electronic and automotive components Aerospace components Office furniture Automotive sheet metal Input power: 230-460 VAC Output range: 1000-80,000 A Phase: single Hodswcax Eopfx Ahajt Welding period Range: 0-99

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Hsdpfx Aevtn H Tehajt Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: refurbished (used), type of cooling: water, welding current (min.): 25 A, welding current (max.): 450 A, Second-hand Röwac PU450 Double Pulse MIG Refurbished, tested, serviced and ready for immediate use 3 Months Warranty Specifications: 25-450 AMP 400 Volt Pulse / Double Pulse Hjdpfxezv I Nvs Ahaot Synergic Water-cooled 2/4 Step 4 Roller drive Gas pre flow / Gas post flow Start current / End current Fixed programs / Program memory Elektrode option Including: 4 Meter Welding torch, earth cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2017, functionality: unexamined, R+P Stud Welding Cell Enclosed protective cell made of aluminum profiles Safety enclosure with protective doors Signal light Integrated control cabinet Documentation available Suitable for automated stud welding processes Nelson Stud Welding Machine Manufacturer: Nelson Stud Welding Type: SD-FSE 1000S Year of manufacture: 2017 Serial number: 1739289 Part No.: 80-07-57 Technical data: Hsdpfxszvylpj Ahast Supply voltage: 24 V DC / 90 V DC Input current: 1 A / 10 A Welding current: up to 2000 A (duty cycle 2%) Protection class: IP20 Polarity: STD Scope of delivery: Welding gun Connection cable Mobile equipment cabinet Both units were last used together as an automatic stud welding system.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). Hedezw Uh Uopfx Ahaot -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.