Used Section Bending Machine for sale (65,886)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm Gbsdpe Aiuyxsfx Aanow MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! Gbedpfx Aas Ahg T Hsnjw TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: Gjdpfxoz Ix Ukj Aanebw For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 03940027, functionality: fully functional, pressing force: 28 t, stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 20 mm/s, table width: 600 mm, table length: 1,150 mm, table height: 900 mm, distance table to ram: 380 mm, total length: 1,150 mm, total width: 600 mm, total height: 900 mm, overall weight: 560 kg, Description: For sale is an absolutely reliable ROWA bending machine, model T-280, from its original owner. We purchased the bending machine new in 1994, and it has been in our possession ever since and has always been used with great care. The machine is in technically perfect condition and is ready for immediate use. Application: The ROWA bending machine T 280 is a hydraulic horizontal bending machine (also called a bending press) used for edge bending, bending, embossing, and straightening of metal profiles. Technical Data Overview: According to the data sheets, the machine has the following specifications: • Press force: Maximum 280 kN (corresponds to approximately 28 tons). • Bending capacity for flat material: Up to 150 x 25 mm, depending on the bending radius. • Bending capacity for gas pipes: 3/8" to 2". • Stroke adjustment: Continuously adjustable under pressure from 0 to 250 mm (partially specified as 200 mm). • Tool height: Maximum 150 mm. Gbedpfx Aaj Ai Sadenew • Motor power: 3.0 kW drive. • Speeds: Working stroke continuously adjustable up to 0.6 m/min, return stroke 1.2 m/min. • Dimensions and weight: Approximately 1150 x 600 x 900 mm (L/W/H) with a weight of 560 kg. • Construction: The machine table and cylinder are made of a robust cast-iron housing, which ensures high precision and low deformation. Extension: For particularly convenient handling in the workshop, the machine has been sensibly extended: On the rear side, there is a stable, three-part tool holder (bolted on), so that important bending tools are always readily available. In addition, the machine is mounted on a custom-made base, which allows it to be quickly and easily moved at any time using a pallet truck. The machine is available for immediate delivery. Inspection and demonstration are possible by arrangement. Terms of sale and delivery: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading, and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to available documentation. Subject to prior sale.

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 2020-09-B970, High-quality compact bending machine Dynobend TM 02 – in top condition, including a large tool kit, for sale. Condition & Inspection • The machine was purchased new directly from the manufacturer Dynobend in 2021 and has been in our possession ever since. • It is used but in good condition (see photos for details). Gbodpoz Ny Rkofx Aanjw • Inspection is welcome: The bending machine is currently powered on and fully functional. After prior appointment, it can be inspected and demonstrated in operation. Application & Scope of Performance • Focus on solid material: The machine was used almost exclusively for bending solid material. It can also be used for bending pipes (with limited application areas). • Control & Programming: Up to 25 individual bending cycles can be programmed – extremely practical and absolutely sufficient for most applications. • Length stop: o The programmable length stop covers 0 to 1500 mm as standard. o By bending on both sides, workpieces up to 3000 mm can be processed. o Without a direct stop, lengths over 3000 mm are also possible without any problems. Extensive tool kit including additional equipment: • Numerous additional tools were manufactured for the standard tool kit to significantly expand the machine's range of applications (see photos). • The machine will only be sold together with the complete tool kit. Complete documentation available • The sale includes all important and legally relevant documents: • Original EC declaration of conformity (Directive 2006/42/EC, Annex II A) • Acceptance test report • Original operating manual available • Invoices available • The price is ex works (EXW). • Dismantling, professional loading, and transport must be organized by the buyer or carried out by a commissioned freight forwarder. • Technical specifications according to the nameplate and available documents. Subject to prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for angle iron Godpfx Aj Af Utaeanobw • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Gjdpj Ahiuajfx Aansbw Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Condition: used, functionality: fully functional, Year of construction: 2018, CNC PIPE BENDING MACHINE, year 2018 Made in China Excellent condition, rarely used Liye DW 63 CNC x 2 AS CNC pipe bending machine – a hydraulic, fully automatic machine designed for precise bending of metal pipes. It provides high repeatability and is used in various industries, such as furniture manufacturing, automotive, and construction. Key technical parameters: • Model: DW 63 CNC x 2 AS • Manufacturer: Zhangjiagang Liye Machinery Co., Ltd • Power supply: 380V, 50Hz • Bending capacity (maximum diameter x wall thickness): Ø63 x 2 mm • Automation: Full (CNC) • Control: Bending axis driven by a hydraulic cylinder, feed (X) and rotation (Z) axes driven by servomotors, ensuring high precision. • Materials: Capable of bending steel, stainless steel, aluminum, brass, and copper. • Additional features: Interactive touch screen, programmable springback compensation, automatic mandrel lubrication (optional) Gbedpe Ahx Rvofx Aanow • Condition: Used, functional

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Gbsdpjzn Rdmsfx Aanow Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: Gbodpfx Aaswk Rlxsnow length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 1988, pipe diameter (max.): 60 mm, bending angle (max.): 186 °, bending radius (max.): 220 mm, bending radius (min.): 30 mm, total length: 4,900 mm, total width: 1,100 mm, total height: 1,250 mm, input voltage: 380 V, Equipment: documentation/manual, emergency stop, foot remote control, Title: Mandrel Bending Machine IBP Pedrazzoli UNI-60 – €2,000 (negotiable) (Large, comprehensive 161-piece tool set available as an option) Geds Aig Hvspfx Aansbw Description: For sale is a robust IBP Pedrazzoli UNI-60 mandrel bending machine (semi-automatic) manufactured in 1988. The machine was originally purchased by us and has been in continuous use ever since. The economic highlight: 166 optional tool sets (original net price approx. €150,000). The true value of this offer lies in the enormous, durable tool inventory. The tools have a long service life. Even if you switch to a newer machine in the future, you will secure an invaluable foundation for your production. The bend quality depends on the material, outer diameter of the tube, wall thickness of the tube, and bending radius. • Additional price for tool set: €29,500 (net) • Scope: Tools for round tubes, flat steel, square & rectangular tubes, as well as round tubes (up to max. Ø 60.3 x 3.6 mm, S235) as per the attached list. • Documentation: Drawings for the basic mounting dimensions (clamping jaws, sliding rails, bending dies) are complete and available. _____ Technical Data & Machine Capacities: • Manufacturer / Type: IBP Pedrazzoli UNI-60 (semi-automatic) • Machine number: 7.2230333 | Serial number: 881124 | Certificate: 1430 • Tool holder (shaft diameter): Standard 50 mm (an alternative 32-mm shaft is available for tight radii) • Tube feed length: approx. 3,800 mm (depending on the design, tube lengths of up to 6,000 mm can be processed by feeding the tube from both sides) • Maximum bending angle: 185° • Hydraulic system: 15 HP, 380 volts, 50 Hz (connected to 380V) • Operating pressure: 100 bar • Wiring diagrams: Hydraulic wiring diagram (Type: 8.7903613/R) & Electrical wiring diagram (Type: 88902810/R) available. • Documentation: Original operating manual and original acceptance test report are available. Condition & Transparency: The machine is approximately 38 years old. Over the years, individual components have been repaired and replaced by specialist companies (partially deviating from original parts). Due to its age, the machine is explicitly sold without a guarantee for the remaining service life: the buyer bears the risk of future component failures. The machine is currently still connected to the power supply and can be inspected and demonstrated in operation at our facility by prior arrangement. An on-site inspection is strongly recommended before purchase. _____ Sales and Delivery Conditions: • Pricing: Ex works (prices net, plus statutory VAT). • Logistics: Dismantling, loading and transport must be completely organized and carried out by the buyer (or by a commissioned freight forwarder). • B2B sales only: "Sale only to companies, businesses, or dealers with proof of commercial status (no sale to private individuals)." • Availability: Subject to prior sale. For further questions, the detailed tool list, or to arrange an appointment, simply send us a message or call us directly!

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Gbjdpfx Ajzuzpyoanjw Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! Gjdpfx Ajz Nhlijanebw In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, Semi-automatic tube bending machine, mandrel tube bender MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No. Year of construction for simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 Gbjdpfopu R Nvex Aanew - SIEMENS S7-200 control with TD200 display - Machine without bending tools and without tool storage pins 25 x 183 mm - Only 1 bending mandrel available (see pictures). Required space (L x W x H) 1000 x 1000 x 1500 mm Weight 390 kg Good condition

Condition: used, functionality: fully functional, Year of construction: 1987, Swivel bending machine / sheet metal bending machine, Thalmann TACO 15-4.2, with a working length of 4.2 m. Technical data: - Manufacturer: Thalmann Konstruktionen AG - Model: TACO 15-4.2 Meter - Machine type according to nameplate: THAKO 15-4.2M - Working length: 4.2 m Gbedpfe Ait Iysx Aanjw - Year of manufacture: 1987 Condition: used, functional. Location: Innsbruck (Tyrol). Inspection and collection by appointment. Sold on behalf of a customer.

Condition: new, Year of construction: 2026, functionality: fully functional, New bending machines from Tubend Type: HP40 Gbedpfxj Ai Runo Aanjw Capacity: 40 tons / 250 x 16 mm Stroke: 290 mm NC touch screen control Foot pedal operation

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t Gbedpfx Asx Ni E Ioanew ja

Condition: new, Year of construction: 2026, control type: manual, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, overall weight: 1,000 kg, total length: 4,200 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, Highly precise press brake for steel, copper, zinc, and aluminum sheets. These press brakes and all common spare parts are available ex stock. Maximum working length of the press brake: 4200 mm Bending capacity: up to 0.8 mm (steel sheet) Godpfx Asb Hxzyjansbw Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.0 mm, copper sheet: 1.0 mm Bending angle of the bending machine: max. 160 degrees Cutting with the roller shear across the entire working width Bending ram thickness: 20 mm Cutting with the roller shear across the entire working width Raising of the upper beam in three positions Upper ram stroke: 80 mm Degree scale Weight of the press brake: approx. 810 kg Cutout 60 mm / 45° Roller shear 0.8 mm, additional cost: 350 Euro Manual folding machine, additional cost: 75 Euro Delivery costs: 500 Euro to Germany and Austria Delivery date: every week, Monday/Tuesday Payment upon delivery or prepayment Invoice will be issued with 0% VAT. Your VAT identification number is required for this.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, wire diameter (max.): 8 mm, WAFIOS BMU 40 CNC 3D Wire Bending Machine | 2015 | Decoiler | Tooling | Complete Production Cell Complete CNC Wire Bending and Forming Cell WAFIOS BMU 40 CNC wire bending machine | Wire decoiler / pay-off system | Tooling sets | Conveyor and collection system | Safety enclosure | CNC control For sale: a complete used WAFIOS BMU 40 CNC wire bending and forming machine with peripheral equipment and extensive tooling. The machine is designed for automatic production of formed wire components and is offered as a complete production cell. The machine is currently installed together with the wire feeding system, decoiler, finished-part handling equipment, safety guarding and dedicated tooling. The system consists of: • WAFIOS BMU 40 CNC 3D wire bending machine • CNC control unit with operator panel • Handheld operator control • Wire feeding and straightening section • Wire decoiler / pay-off unit Gbedpfxsz R Rpbe Aanjw • Automatic wire forming and bending section • Finished-part conveyor / collection system • Tooling and forming accessories • Tool cabinet with dedicated tooling • Additional machine tools and accessories • Safety fencing with access gates • Electrical and control equipment Technical Specifications • Manufacturer: WAFIOS AG, Germany • Model: BMU 40 • Machine type: CNC wire bending / forming machine • Number of CNC axes: 3 • Wire diameter range: 3 - 8 mm • Year of manufacture: 2015 • Machine No.: 2 7656 018 • Plan No.: 7656 2 9000 18 • Power supply: 3-phase, 400 V • Frequency: 50 Hz • Rated current: 13 A • Control voltage: 24 V DC / 230 V AC • CE marked Equipment Included • Wire decoiler / pay-off system • Wire feeding and straightening equipment • CNC operator station with screens and keyboard • Handheld control unit • Dedicated forming tools, dies, guides and accessories as shown in the photos • Tool storage cabinet • Finished-part conveyor / collection table • Product collection racks • Safety guarding around the complete production cell • Additional maintenance and setup tools as shown in the photos Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell with peripheral equipment and tooling. The equipment is offered together with the accessories and tooling shown in the photos. Additional Information • Complete production cell available • Extensive tooling and accessories included as shown in the photos • Wire decoiler included • Finished-part handling / collection system included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility Location Koszalin, Poland

Condition: good (used), functionality: fully functional, Year of construction: 2011, Used 6-meter pipe bending machine with Siemens control Pipe length: 4 meters Year of manufacture: 2011 Gedpe Agu D Eofx Aanebw 6 tool sets Round 22, radius 44 Round 42, radius 84 Round 28, radius 56 Round 18, radius 36 Round 35, radius 70 Round 54, radius 108

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm Godsykl Rzepfx Aanjbw smallest bending radius: 32 mm motor: 30 kW

Condition: good (used), Year of construction: 1999, Used horizontal bending machine from Loar Gbedpj Ai Ta Sjfx Aanow Type: Bendhor 30 Capacity: 30 tons Includes various tools Year of manufacture: 1999

Condition: new, Year of construction: 2026, The BENDMASTER 50 Mandrel-Free Tube Bender is an industrial machine designed for bending steel tubes and hollow sections without the need for an internal mandrel. Its integrated hydraulic clamping system, two operating modes – automatic and manual – and digital bending angle display ensure exceptional precision, repeatability, and ease of operation. The machine is ideal for mass production, prefabrication of piping systems, and workshops requiring precise control over the bending process. Main Advantages of the CORMAK BENDMASTER 50 Tube Bender Mandrel-free bending – bending tubes and hollow sections without cross-sectional deformation and without the need for an internal mandrel. Hydraulic clamping system – precise clamping force automatically adjusted according to the tube diameter. Two operating modes: automatic and manual – full control over the bending process, with the ability to program bending sequences or operate the machine manually. Digital bending angle readout – real-time display of the preset and actual bending angles on the operator panel. 2.2 kW main motor – ensures stable bending die rotation, even when processing large-diameter tubes. Bending dies for tube diameters of 25, 32, 38, and 48.3 mm – ready for operation with the most commonly used steel tube sizes. Gedpfx Aaevugw Hjnobw Bending angle up to 180° – enables the production of full bends and closed-shape components. Construction and Technology The BENDMASTER 50 is equipped with two independent motors: a 2.2 kW main motor driving the gearbox and bending die, and a 1.1 kW motor powering the hydraulic pump responsible for the clamping system. In programmed mode, clamping is performed automatically using an adjustable limit switch. This configuration allows optimal clamping parameters to be achieved for each tube diameter, improving bending quality and repeatability. The control panel features a clear digital display showing both the preset and actual bending angles. Precision and Operating Efficiency The BENDMASTER 50 tube and profile bender offers a full bending range of up to 180° while maintaining high accuracy. The bending die rotation speed of 5 rpm provides precise control over the shape of the workpiece while maintaining high productivity. Automatic mode enables repetitive bending in mass production with minimal operator involvement, while manual mode offers maximum flexibility and allows settings to be adapted to specific workpiece requirements. The machine is ideally suited for bending medium- and large-diameter steel tubes in serial production environments. Applications The BENDMASTER 50 mandrel-free tube bender is suitable for a wide range of industries and applications, including: Manufacturing piping systems for plumbing, heating, and industrial installations. Prefabrication of balustrades, handrails, and structural frames. Production of furniture components and decorative elements made from steel tubes. Standard Equipment Digital bending angle readout. Bending dies for the following tube diameters: 25 mm (bending radius: 90 mm) 32 mm (bending radius: 114 mm) 38 mm (bending radius: 134 mm) 48.3 mm (bending radius: 170 mm) Technical Specifications Maximum bending angle 180° Bending die rotation speed 5 rpm Main motor power 2.2 kW Hydraulic pump motor power 1.1 kW Overall dimensions 1145 × 580 × 980 mm Weight 620 kg

Condition: new, Year of construction: 2026, sheet thickness (max.): 1 mm, sheet thickness steel (max.): 1 mm, overall weight: 540 kg, total length: 3,440 mm, warranty duration: 12 months, Equipment: CE marking, angle stop, documentation/manual, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Gbedpfoci R Exsx Aanow Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: used, Year of construction: 2004, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri Gbedpfxjzxt Txe Aansw