Used Shark 282 Sxi Evo for sale (836)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Hodsyui Ekjpfx Apnefg Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,856 h, load capacity: 5,000 kg, lifting height: 6,800 mm, free lift: 1,960 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, DGUV certified until: 05/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, air conditioning, cabin, full service history, lighting, seat heater, sideshift, Linde H 50 D Evo Diesel Forklift with the following specifications: Lifting capacity: 5,000 kg Hedpfx Aoy Rh Ecepnefg Lifting height: 6,800 mm Overall height: 3,200 mm Year of manufacture: 2021 Operating hours: 9,856 Fully equipped Linde 5.0-ton diesel forklift with full cabin and heating, air conditioning, 4-cylinder engine, new front and rear tires (to be installed), triplex mast with full free lift, mini-levers, side shifter, 4th valve, two-pedal control, fork length 1,200mm Including 1,000-hour service according to LINDE manufacturer specifications (with new timing belt and new water pump) and valid UVV inspection. Additional attachments such as fork positioners, rotators, etc., or other fork lengths available upon request. Viewing, demonstration, and test drive available by appointment by phone. Sale exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). For more information and offers, please visit our website.

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container Hfjdpfx Apoy I Da Rensg * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2008, operating hours: 24,869 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Axle 1: left 10 mm right 10 mm Hedpfjy N D Rlex Apnjfg Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2008, operating hours: 25,885 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12mm Axle 3: left mm right mm Hfedey N Ab Njpfx Apnog

Condition: ready for operation (used), Year of construction: 2017, operating hours: 235 h, clamping force: 3,500 kN, screw diameter: 70 mm, injection weight: 1,172 g, total width: 2,030 mm, total height: 2,350 mm, overall weight: 21,500 kg, product length (max.): 7,110 mm, This Milacron Elektron Evo 350 was manufactured in 2017. A robust electrical injection moulding machine featuring a screw diameter of 70 mm, closing force of 350 T, and a shot weight of 1172 g. It supports mold sizes between 249 – 800 mm and has minimal usage with only 235 testing hours. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • The machine is like new. Technical Machine Benefits • Injection unit size: 2290 • - Max. Injection Pressure: 1421 bar- Max. Stroke Volume: 1232 cm3- Max. Shot Weight (PS): 1172 g- Screw Stroke: 320 mm- Carriage Stroke: 400 mm- Nozzle Contact Force: 30 kN- Injection Rate: 580 cm3/s- Injection Speed: 150 mm/s- Screw Speed: 250 ot/min (RPM)- Plasticizing Rate (GPPS): 77 g/s- Effective Screw Length (L/D): 22.9 • - Number of Heating Zones: 4+1- Installed Heating Power: 39.6 kW Hfjdpfxsx D Iz Is Apnsg • Clamping Force: 3500 kN:- Distance Between Tie Bars (H x V): 720 x 720 mm- Platen Dimensions (H x V): 1030 x 1030 mm- Mold Opening Stroke: 675 mm- Max. Daylight: 1475 mm- Min. Mold Mounting Height: 250 mm- Max. Mold Mounting Height: 800 mm- Max. Mold Weight (Moving / Stationary): 2630 / 1320 kg- Max. Total Mold Weight: 3950 kg- Ejector Force: 75 kN- Ejector Stroke: 200 mm Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,400 mm, total width: 685 mm, Equipment: CE marking, documentation/manual, SCM Olimpic K 230 evo edge banding machine in excellent condition. Bought new, first owner. All documentation and tools are included. Extraction pipes with branches are included up to the shut-off valve. Extra set of diamond pre-milling tools. Additional options: Hsdpfsyxhqnsx Apnjfg - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical data: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge band thickness in strips mm: 0.4 – 3 - Edge band thickness on roll (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for cutting mm²: 135 - Roll holder diameter mm: 780 - Max. edge band overhang vs. panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - With edge band in roll or strips mm: 160 (140*) - With solid wood strips mm: 220 (140*) - Min. panel width with edge band on roll (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: excellent (used), Year of construction: 2011, Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 Hfodpfx Ajlnixiepnog useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw Hfsdpfsy Hu H Esx Apnog -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg

Condition: used, machine/vehicle number: 26524, Year of construction: 2016, operating hours: 7,247 h, load capacity: 3,000 kg, lifting height: 3,650 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,563 mm, Equipment: cabin, Device details: Year of manufacture: 2016 Load capacity: 3,000 kg Lift height: 3,650 mm Recorded operating hours: 7,247 h Free lift: 150 mm Mast type: Standard Mast height: 2,563 mm Length/Width/Height: 2,755 / 1,256 / 2,240 mm Operating weight: 5,115 kg ---- Equipment: * Overhead guard * 3rd valve Hfodpfey R Urcox Apnog * 4th valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Clamping fork ---- Additional device information: Reverse warning system Seat heating ---- Operating hours stated are generally read-off hours. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rental! We are happy to buy your USED equipment too. Do you have questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. In B2B transactions, the device is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: used, This listing is for the Tecan Freedom EVO-2 150 The unit is in full working condition and is ready for immediate use Hfedpfx Apsy Eraasnjg The Tecan Freedom EVO-2 150 is a high-performance automated liquid handling workstation designed to streamline laboratory workflows with precision, speed, and flexibility. Ideal for research, clinical, and pharmaceutical laboratories, the EVO-2 150 enhances reproducibility while reducing manual errors and hands-on time Featuring a modular deck layout, advanced robotic arms, and configurable liquid handling options, the system supports applications including sample preparation, assay setup, PCR preparation, genomics, proteomics, and drug discovery workflows. Its intuitive software platform enables easy method development, workflow customization, and integration with third-party lab instruments. Engineered for high-throughput environments, the Freedom EVO-2 150 delivers consistent pipetting accuracy across a wide volume range, making it a reliable solution for laboratories seeking automation, scalability, and efficienc

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Hedpfxeyi Dnij Apnefg Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2013, x-travel 400 mm y-travel 400 mm z-travel 375 mm Hjdpfx Ajy Nd U Repnofg weight of the machine ca. 7150 kg

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Hodpfx Asyudidopnefg Location: Nattheim

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 *Mast: 3F4650 ID: 26057.5931 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Operating hours: 6472 hours Battery: Completely NEW * 48v / 625ah * Manufactured 02/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (approved for ZONE 1) Gas group = IIB Temperature class = T4 Hfjdpfx Aoy Itqrepnsg Type = Cat 2D (approved for ZONE 21 - Dust) Dust group = IIIB Temperature class = T 135°C - IP 6X Equipped with CONTAINER specs!! - Joystick control forward/reverse - Triplex FFL mast - Front working light - Flash beacon - Blue spot safety light

Condition: good (used), Year of construction: 2016, operating hours: 9,587 h, load capacity: 1,600 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 - 386 / 02 evo * EX * Pyroban 3G / Zone 2 *Mast: 3F4600 ID: 26053.5746 Category: Used Mast: 3F4650 Lowered height: 2120 mm Hodpfsy Itpzsx Apnjfg Lifting height: 4600 mm Capacity: 1600 kg Year: 2016 Hours: 9587 hours Battery: COMPLETELY NEW * 48v / 625ah Options: * EX * Atex - Pyroban !!!! System / Certificate = S6000 E Gas group = IIB Type = 3G ( permitted in ZONE 2 ) Temp class = T3 Equipped with CONTAINER specifications!! - Joystick control forward/reverse - FULL cabin - Additional spotlights - Triplex - FFL mast

Condition: like new (used), Year of construction: 2016, operating hours: 6,410 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer & model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25072.7804 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2016 Operating hours: 6410 h Battery: Completely NEW * 48V/625Ah * Year 2025 Options: CONTAINER specs!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Hfsdsy Itg Hopfx Apnsg Gas group = IIB Type = Cat. 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete road lighting - Work spotlights - Joystick control for forward/reverse - 2D - FFL mast - New tyres (ATEX specs)

Condition: like new (used), Year of construction: 2016, operating hours: 6,368 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25073.0896 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2016 Hours: 6368 hours Battery: Completely NEW * 48v/625ah * Year 2025 Options: CONTAINER specs!! Hfjdoy Itgyepfx Apnog * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temp class = T4 Equipped with: - Complete road lighting - Spotlights - Joystick control for forward/reverse - 2D-FFL mast - New tires (ATEX specs)

Condition: like new (used), Year of construction: 2017, operating hours: 5,259 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25063.3568 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2017 Hfsdpfsy Itgtox Apnog Operating hours: 5,259 hours Battery: Completely NEW * 48V/625Ah * year 05/2026 Options: CONTAINER specs!! * EX * Proplan!!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temp class = T4 Equipped with: - Full street lighting - Spotlights - Joystick control forward/reverse - 2-stage D - FFL mast - New tires (ATEX specs)

Condition: like new (used), Year of construction: 2017, operating hours: 5,159 h, load capacity: 1,600 kg, lifting height: 3,140 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, Manufacturer + model: LINDE E 16 PL - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3140 ID: 25063.3443 Category: Used Mast: 2F Lowered height: 2120 mm Lifting height: 3140 mm Capacity: 1600 kg Year: 2017 Operating hours: 5159 hours Battery: Completely NEW * 48v/625Ah * Year 05/2026 Options: CONTAINER specifications!! * EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temperature class = T4 Equipped with: - Complete road lighting - Additional spotlights - Joystick control forward/reverse - 2D - FFL mast - New tyres (ATEX specs) Hfedpfx Aoy Itgmepneg

Condition: like new (used), Year of construction: 2015, operating hours: 5,608 h, load capacity: 1,600 kg, lifting height: 3,340 mm, fuel type: electric, mast type: duplex, construction height: 2,230 mm, Manufacturer + model: LINDE E 16 - 386 / 02 evo * EX * Proplan 2G / Zone 1 Mast: 2F3340 ID: 24122.5302 Category: Used Hedsy Itb Ropfx Apnofg Mast: 2F Lowered height: 2230 mm Lifting height: 3340 mm Capacity: 1600 kg Year: 2015 Operating hours: 5608 hours Battery: Completely NEW * 48v / 500ah * Year 05/2026 Options: EX * Proplan !!!!! System = INERIS 08 ATEX 3022 X Gas group = IIB Type = Cat 2G (approved for ZONE 1 and 2) Temp class = T4 Equipped with: - LINDE steering - Duo pedal! - 2D - FFL mast - New tyres (ATEX specs)

Condition: excellent (used), functionality: fully functional, For sale is a Vision brand digital video inspection system in good, used condition, as shown in the pictures. Technical Specifications: • Manufacturer: Vision Engineering • Model: EVO Cam II • Includes a multi-axis column stand and angle lens • With 360° angle optics (as a lens attachment) for all-around viewing of vertical objects • Optical zoom: 30x • Digital zoom: 12x • With monitor • Condition: Used, in working order Shipping costs via freight forwarder: approx. €100 Hfjdpfx Aey N Ak Djpnog International buyers are welcome! You will receive an invoice with VAT listed. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded free of charge. Subject to errors in technical data and prior sale.

Condition: used, machine/vehicle number: 26442, Year of construction: 2015, operating hours: 10,536 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,714 mm, .: 26442 Machine details: Year of manufacture: 2015 Load capacity: 3,000 kg Lift height: 3,950 mm Read operating hours: 10,536 h Free lift: 150 mm Mast type: Standard Mast height: 2,714 mm Length/Width/Height: 2,755 / 1,256 / 2,220 mm Operating weight: 4,470 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Partial cabin * Front work lights * Rear work lights ---- Additional equipment information: * Reversing alarm * Flashing beacon Please note that the operating hours are based on the hour meter reading. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments, and sweepers are available immediately. Rental options also available! We are happy to purchase your OLD machine. Do you have questions? You can reach us during business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For business-to-business transactions, the machine is sold as is, not reconditioned. All information is provided without guarantee. Errors and changes excepted. Hjdpfx Ajymn Axopnefg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 85 EVO The Minipack Replay 85 EVO is a mobile, manual shrink wrap machine with a hood, designed for large products and larger packaging formats. Hfodpex Tr R Uefx Apneg – Mobile, manual shrink wrap machine with hood – Output of up to 300 packages per hour – Usable sealing bar dimensions: 840 × 590 mm – Max. product dimensions: 800 × 590 × 300 mm – Max. film roll dimensions: Ø 300 × 800 mm – Working table height: 940 mm – Machine dimensions (closed): 1,950 × 1,000 × 1,180 mm – Machine dimensions (open): 1,950 × 1,000 × 1,480 mm – Machine weight (net/gross): 212 / 264 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, type of input current: AC, product width (max.): 400 mm, input voltage: 230 V, Minipack Replay 55 EVO The Minipack Replay 55 EVO is a manual shrink film packaging machine with hood, designed for medium production volumes. – Throughput up to 300 units per hour – Usable sealing bar dimensions: 540 × 390 mm – Max. product dimensions: 500 × 380 × 200 mm Hfsdpox Tr N Djfx Apnsg – Max. film roll dimensions: Ø 250 × 600 mm – Working table height: 925 mm – Machine dimensions (closed): 1,260 × 810 × 1,165 mm – Machine dimensions (open): 1,260 × 810 × 1,310 mm – Machine weight (net/gross): 105 / 126 kg