Used Shearing Machine for sale (91,898)

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: 2132072, REF: MM6195 1 x Foodlogistik GmbH high-capacity dicing machine supplied with dicing multigrid. This is a fantastic high-throughput dicer for dicing fresh, tempered and cooked meat. Rcsdpjxfll Tefx Ab Rjh Technical specification ⚙️ ✅ Manufacturer - Foodlogistik GmbH ✅ Model - DICR CAPACITY 126. ✅ Serial number - 2132072. ✅ Date of manufacture - 2013. ✅ Throughput / capacity - up to 2,400 kg/h depending on product. ✅ Chamber dimensions - 530mm long x 126mm wide x 126mm high. ✅ Electrical requirements - 400-415 V / 50 hz / 3 phase. ✅ Power - 5.6 kW. Dicing grid - multigrid, currently set up for 10mm cubes. ✅ Condition - very good, last used in June 2025.

Condition: used, Year of construction: 1992, Butler LE5000 Elgamill 5 Axis CNC Horizontal Boring & Milling Machine, Fanuc 15M Control. YEAR 1992. Available with all the Tee slotted floor plates, angle plates listed below. Rodpfx Aextf T Hjb Rsch 112767 2750mm x 1520 mm x 250mm Tee slotted Floor Plate 112768 2750mm x 1520 mm x 250mm Tee slotted Floor Plate 112769 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112770 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112771 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112772 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112773 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112774 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112775 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112776 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112777 6700mm x 1070mm x 880mm Surface Table 112778 600mm x 500mm 1800mm Angle Plate 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate 112788 1830mm x 1220mm x 600mm box table tee slotted on two faces 112789 800mm x 750mm x 1190mm Angle Plate

Condition: excellent (used), Overview The Touchline CPC375 is a high-performance, multifunction finishing system capable of cutting, creasing, and perforating in both lengthways and crossways directions. Designed for digital printers, in-plants, and commercial finishing operations, the CPC375 delivers professional-quality output with minimal setup time. Its automated tool detection and patented changeover unit allow quick adjustments, enabling fast production of vouchers, tickets, coupons, reply cards, and other print products. With support for a wide range of paper stocks and automated operations via a touchscreen interface, the CPC375 combines speed, accuracy, and versatility in a single, compact system. Key Features of the Touchline CPC375 Multi-functional finishing: Cut, crease (positive & negative), and perforate (stop or continuous) in a single pass. Wide paper range: 80–400gsm for cutting/creasing; perforates up to 300gsm. Automated setup: Patented changeover unit allows quick, tool-free swaps; tools detected electronically, and working depth automatically adjusted via touchscreen. Flexible tooling: Dual tool module, cross knife, and lateral rotating longitudinal knives; stores up to three additional tools; up to four perforating heads for length of sheet perforation. High-speed operation: Up to 6,000 sheets per hour, with high-capacity feed load. Large sheet capacity: Maximum sheet size 370mm × 1200mm with table extension. Vacuum conveyor feeder: Supports offline or inline feeding from printers. Touchscreen control: Intuitive interface for easy job setup, adjustments, and monitoring. Complete System Includes Touchline CPC375 finisher with crease, perf and cut – refurbished and fully tested One optional start/stop perforation unit for length of sheet perforation Touchscreen interface for full control and automated adjustments Tool magazine with storage for multiple tools Vacuum conveyor for reliable sheet feeding Why Choose the Touchline CPC375? Versatility: Crease, perforate, and cut multiple paper stocks in one machine. Accuracy: Automatic tool detection and setup ensure precise finishing every time. Ease of operation: Touchscreen interface with quick setup reduces training and changeover time. Productivity: High-speed operation and large sheet capacity handle small and high-volume jobs with ease. Professional results: Produces high-quality output for tickets, vouchers, coupons, cards, and other printed materials. Rcedpfx Asxrdp Djb Roh Specifications Manufacturer Multigraf Model Touchline CPC375 Condition Refurbished Stock Number 114963 Min sheet size 105mm x 148mm Max sheet size 370mm x 1200mm with extension Creasing paper weight 80gsm to 400gsm or 0.4mm Perforating paper weight 80gsm to 300gsm or 0.3mm Cutting paper weight 80gsm to 400gsm or 0.4mm Feeder system Suction feed Control panel Touchscreen Double sheet detection Ultrasonic (standard) Max number of creases/perfs 20 per sheet Possible cuts Front 4-120mm. Centre 4-40mm. End 4-27mm Standard tooling 1 crease bar (2 crease widths), 1 cross perforation tool (11 tpi) Optional tooling Stop/Start rotary perforation. 1 unit included. Option to add 4 in total Electrical requirements 240v 50/60Hz

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Rcodpfx Aboxr Rz Tj Rsh Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: new, Year of construction: 2025, machine/vehicle number: 50, laser power: 12,000 W, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, total length: 120,500 mm, TX3R Professional heavy-duty tube laser cutting machine 6000W-20000W Model: TX3R Redpjqk S H Uofx Ab Roch Power: 6000W-20000W X/Y-axis Positioning Accuracy: ±0.05mm/m Cutting Capacity of Round Tube: Φ20-Φ360mm Cutting Capacity of Square Tube: □20*20-□360*360mm Weight of Single Tube: 1200kg

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging - Release of the stoppers and removal of the bottles from the filling position - Capping (automatic/manual) - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Rcedexm T Hnepfx Ab Rjh Line has been dismantled, attached photos are from previous installation.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Model - PIB 400. Rcodpfx Abevw I Nie Rsh Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Electric supply - 400 V / 50 hz / 3 phase.

Year of construction: 2001, condition: used, machine/vehicle number: 1001080297, Robopac Helix Wrapping Machine Rodpfx Abjxqz Alj Rsch

Condition: good (used), Year of construction: 2012, Trumpf TruLaser 1030 Laser Cutting Machine with TruCoax 2500 Diffusion Cooled CO2 Laser & Trumpf CNC Control Rjdoxncp Uepfx Ab Rjch 2-Axis; Sheet Size 1,500mm x 3,000mm; Fully Automatic Pallet Changer with (2) Pallets, Dimensions Approx 3,000mm x 1,600mm each; 7.1/2" Lens Cutting Head; CO2, 2,500 Watt Laser Capacity; Nitro Line; 15" TFT Screen; RJ45 & USB Interface; S/No. of Machine A025A0366. Integrated KLH Chiller Unit; 400 Volt; 2 Axis; Closed Machine Frame Integrated Laser Unit; Sheet Support Accessible from both sides; Motorised Front Door & Rear Opening; Traverse Speed Approx 40 MPM; Weight Approx 8,900kg; (3) SICK C4000 Select Safety Light Curtains; (1) 3M Scotchcal 8518 Gloss Graphic Protection over Laminate 1,372mm x 45.72 Meters Drill Pallet Changer Template for Trulaser 1030 Machine (Unused).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: A0250A0250, control type: PLC-controlled, degree of automation: automatic, actuation type: electric, controller manufacturer: Trumpf, controller model: Trumpf, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Trumpf, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, input voltage: 400 V, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Trumpf laser machine for sale in perfect working order as per attached photos and video. It can be viewed at any time, in use, at our facility in Letterkenny. Redpoxrulvjfx Ab Roch

Condition: good (used), Year of construction: 2010, 1 x SIAT Heat Shrink Tunnel Model: GT40 Year: 2010 Cleaned and serviced Purchased and installed for a trail product, no longer needed. Located in Leek, UK Rcsdexrcxkjpfx Ab Rjh

Condition: excellent (used), Year of construction: 2001, Ref: 11019 . 2001 MBO Z2 Mobile Knife Can rotate 180° Rcsdpfx Aexnzrbob Reh Left or right delivery Specification: Infeed width 15 - 48 cm Infeed length 8 - 32 cm Infeed height 45 - 95 cm Max speed: 160 cycles/h

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Serial number -  1213255 ✅ Date of manufacture - 1992 Rcsdpfx Aboxb Alvj Roh ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Condition: used, Kamas FA 1250 Sieve Dressing Station System Rjdpoxqzuujfx Ab Rjch

Condition: used, Hahn & Kolb lapping machine, double sided lapper, 800mm diameter wheels. (20) 300mm dia carriers, 7708 hours, approx dimensions 6ft x 4 ft x 6ft high, no coolant tank. Rsdoxqgfljpfx Ab Roch

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Rjdpfx Aoh U Rznsb Rsch Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: excellent (used), Year of construction: 1999, Ref:11017 . 1999 Polar 92 E Guillotine. 92cm guillotine Equipped with: Frequency controlled drive motor Variable speed back gauge Microprocessor control Colour display with operator guidance graphics Variable pressure clamp for various stocks Air table with blower Steel side tables left & right 2 x HSS knives Knife changing device Rear Table Guard I.R. light barrier guard Including tools & manual. Specification: Rcodpfsxnzqqsx Ab Reh Cutting Width, Max: 92 cm Clamp Opening, Max: 11 cm Feed Depth, Max: 92 cm Power Required : 3kW

Condition: used, Damas Golfa 1327IE Fine Cleaning Machine Rcodpfx Absxqzt Ds Roh

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Rcodpfxeu Dahne Ab Rjh Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 2022, machine/vehicle number: 700281303, Bühler Sortex A Optical Sorting Machine (2022) Rjdpsxqzl Tsfx Ab Rjch

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. MACHINE CONSTRUCTION & FEATURES  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Tee Slot Configuration 5 T-SLOTS X 20H12 TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Rodpfxjvrzv Ej Ab Rsch Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM Rcsdpfxoh U Nvks Ab Rjh HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM Rodpfouv Hn Sox Ab Rsch SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rcedpfxjr Hr Aro Ab Rsh Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6011, Used Soraluce FP-8000 Travelling Column Floor Type milling machine with HEIDENHAIN TNC430CA control and 60ATC Year of manufacture 2001 MACHINE CONSTRUCTION, FEATURES & FITTED OPTIONS • Travelling Column Floor Type Design. • High Performance Linear Guideways. • Orthogonal Auto Indexing Milling Head - 2.5° x 2.5° • X / Y / Z Linear Scales. • 2 off 800mm dimeter indexing tables without any top T slotted platens • Full Length Swarf Conveyor. • Operator’s Platform. TRAVELS – MAIN MACHINE Longitudinal Travel (X-Axis) - 8,000 MM Vertical Travel (Y-Axis) - 2,000 MM Ram Travel (Z-Axis) - 1,200 MM SPINDLE HEAD Spindle Nose Taper - BT-50 Pull Stud - MAS BT50 Type 2 Spindle Speeds - 2 Ranges - 11.4 ~ 230 & 923 ~ 3,000 RPM Rjdpfxjuqytvj Ab Roch Spindle Power - 30.0 KW FEEDS Cutting Feedrate - 5 ~ 5,000 MM / MIN Rapid Traverse (X-Axis) - 15 M / MIN Rapid Traverse (Y-Axis) - 15 M / MIN Rapid Traverse (Z-Axis) - 15 M / MIN Feed Motor (X-Axis) - 57 NM Feed Motor (Y-Axis) - 27 NM Feed Motor (Z-Axis) - 27 NM ATC Tool Storage Capacity - 60 Station Chain Type Tool Shank - ISO-50 MOTOR Spindle Drive Motor - 30.0 KW POWER SUPPLY Voltage - 415V / 50HZ / 3PH SIZE AND WEIGHT Floor Space - 14500 X 6,500 MM Height - 5,250 MM Weight - 25,000 KGS