Used Sheet Leveler for sale (13,179)

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device - front angle fence left 1300 mm - 3 front table extensions 1300 mm Kwedpfxjt Ac D Uo Abvjw - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: excellent (used), Motorized folding bench, swing bending machine, bending machine (used) Manufacturer: GEKA Model: MA 200 Year of manufacture: 2003 Working length: 2040 mm Max. sheet thickness for St 37: 3 mm Max. sheet thickness for Al, Al Mg 3: 4 mm Max. sheet thickness for V2A: 2 mm Opening width of the upper beam: 180 mm Adjustability of the lower beam: 60 mm Max. bending angle: 135° Backgauge, mechanically adjustable by hand: 0 – 750 mm Weight of the machine: approx. 2600 kg Drive power: 3 kW Required space (L x W x H): 3600 mm x 2000 mm x 1400 mm The machine comes from a research center and is in very well-maintained condition. Forklift available for free loading onto truck Affordable shipping available Location of the machine: 48477 Hörstel Ksdpfx Asyvuh Uebveww

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 2,150 h, load capacity: 1,000 kg, lifting height: 700 mm, fuel type: electric, mast type: simplex, construction height: 1,375 mm, fork length: 1,450 mm, drive type: Elektro, Low-level order picker Load centre: 600 kg Fork width: 184 mm Fork thickness: 56 mm Mast type: Mono Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Vulkollan Front tyre condition: 80 - 100% Rear tyre type: Vulkollan Ksdpfxju D Rwms Abvjww Rear tyre condition: 80 - 100% Battery voltage: 24V Battery capacity: 465Ah Battery manufacturer: Remaining capacity - 93% Battery year: 2020 Battery condition: 80 - 100% Description: Refurbished, serviced and inspected according to FEM 4.004 (UVV) // Completely repaired, serviced and checked Electric steering, dimension over forks: 564 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness (max.): 150 mm, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This F1200 has only been used as a showroom model and is therefore almost new. The machine can be viewed at our showroom in Bergeijk. Discover the advanced F1200 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen allows operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operator errors. Depending on the material to be processed, you can opt for a vacuum or magnetic support system. Kjdpfx Asyt Npysbvjww At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth and burr-free surface. This is followed by four oscillating comb brushes that apply light pressure. The brushes provide uniform rounding of all edges and holes, both on the periphery and on the flat-ground product, resulting in the most optimal finish. Additionally, the F1200 is also available in an XL version, which adds a fourth station. This station includes a second grinding unit that allows you to apply a line finish using a finer abrasive belt or finish with a scotch-brite belt. The F1200 offers options for automatic brush calibration, ensuring consistent accuracy, as well as full ERP control and flawless integration into automated production environments. In short, it is a finishing machine that is fully prepared for the future!

Condition: like new (used), Year of construction: 2024, sheet thickness (max.): 110 mm, total length: 4,370 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 6,150 kg, input voltage: 400 V, workpiece height (max.): 110 mm, input frequency: 50 Hz, power: 30 kW (40.79 HP), workpiece width (max.): 1,200 mm, input current: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has only been used for a few demonstrations. You can still view this machine in our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 individually controlled motors. The entire finishing machine can be operated via the HMI touchscreen, which is highly intuitive and ensures effortless operation. The display makes it easy to select different finishing programs, leading to high reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always ensured. At the first station of the finishing machine, burrs and irregularities are removed by a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply gentle pressure to the product, ensuring that all edges and holes of the flat-ground product are rounded, both around and inside. As the final processing step, the Multibrush round brushes provide perfect post-processing. The six brushes deliver a non-directional finish and round off the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, featuring an additional fifth station. The fifth station consists of a second grinding unit, enabling a line finish on your product using a finer grinding belt or Scotch-Brite belt. The SER finishing machine utilizes a unique brush combination, exclusive to Q-Fin and marketed as: “The Ultimate Qombination”. This setup achieves a 2+ mm radius in a single pass. Ksdpjyt Nm Esfx Abvoww The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future!

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk. Kwjdpeyt Nhvefx Abvew

Condition: like new (used), Year of construction: 2023, functionality: fully functional, working width: 200 mm, sheet thickness (max.): 100 mm, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has only served as a showroom model and is therefore as good as new. You are always welcome to visit our showroom in Bergeijk for a viewing. Kedoyt I U Ujpfx Abvsww 2023 Deburring and finishing machine F200 XL with vacuum support. Suitable for deburring, edge rounding, and/or grinding steel sheet parts up to 200 mm wide. Discover the advanced F200 XL finishing machine. All products ranging in size from a one-euro coin up to 200 mm wide can be processed on this powerful compact unit. Burrs and imperfections are removed at the infeed side by a grinding unit, resulting in a smooth, burr-free surface. This is followed by two oscillating combination brushes applying light pressure. The brushes ensure uniform edge rounding of all sides and holes, both around and within the flat-ground product, leading to optimal finishing quality. The F200 XL offers features such as automatic brush calibration to guarantee consistent precision, full ERP control, and seamless integration into automated production environments. In short, it is a finishing machine fully prepared for the future! We can now offer you this F200 XL - VAC showroom machine, year of manufacture 2023, optionally in combination with a WES3000 wet extraction unit and accompanying ductwork. Only available while stocks last. The machine is supplied with one year warranty excluding wear parts. Delivery ex-works Bergeijk. If required, we can also supply the machine including transport, installation, and operator training at your location. The machine can be viewed in our showroom in the Netherlands. Contact us and we will send you an attractive offer.

Condition: used, 2 Farben Offsetdruckmaschine / 2 Color Sheet-Fed Offset Press PM-QM46-2 N+P Kjdeyv A S Ujpfx Abvoww Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm Ksdeyvfy Tepfx Abvsww plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: excellent (used), Year of construction: 2021, Ref: 11062 . 2021 Horizon SmartStacker Only 1.1m books on the counter! The latest, innovative way to process B2 (20” x 29”) digitally printed sheets to finished format size. Features: Near-line operation with Sheet Feeder – can be operated as a near-line system. Kwjdpjycb Srsfx Abvow Newly designed sheet feeder accommodates B2 (20” x 29”) sheets at up to 4,500 sheets per hour. Finishing Line Controller (FLC) controls all setup and operation of the SmartStacker by use of JDF workflow. Can serve multiple HP Indigo 10000 Digital Press units and other HP Indigo presses. Can be connected directly inline to an HP Indigo 10000 Digital Press. Print submission, print, and sheet processing performed without any manual operation for higher sheet integrity & efficient workflow. Can be connected with an Horizon signature folder, saddle-stitcher or perfect binder to achieve total finishing automation. Specification: Sheet Size (Before Cut) Max. 762 x 530 mm or 30.000" x 20.865" Min. 279.4 x 330 mm or 11.000" x 12.995" Piece Size (After Cut) Max. 381 x 530 mm or 15.000" x 20.865" Min. 100 x 105 mm or 3.940" x 4.135" Sheet Weight Range: Normal Paper: 81.4 to 370 gsm Coated Paper (for Merge Stacker): 90 to 360 gsm Paper Thickness: 4 to 15 pt or 0.1 to 0.381 mm *1 pt=1/1,000" Sheet Stacking: Straight Stack or 10 mm or 0.39" Offset Stack Maximum Stack Height: 254 mm or 10.00" Number of Cuts: 1st Process Unit: 1 to 7 columns (14 cutters) 2nd Process Unit: 1 to 4 rows (8 cutters) Production Speed: Up to 4,600 sheets per hour * Production speed differs depending on number of cuts in 1st Process Unit and type/condition of sheets. * HP Press may need to slow down depending on the sheet condition in case of inline configuration.

Condition: used, total length: 2,000 mm, total width: 1,400 mm, total height: 1,600 mm, Weight: 1.400 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic Kjdpeymc Dqefx Abvoww - Max. sheet thickness [mm]: 4 - Max. working width [mm]: 1500 - Backgauge depth [mm]: 800 - Sheet support system: None - Finger guard: Fixed - Transport dimensions: 2000mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 3,700 mm, total width: 1,600 mm, total height: 1,700 mm, Weight: 4.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3050 - Backgauge type: Electric - Backgauge depth [mm]: 750 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3700mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 1 Financial information Kwsdpfxeymbhze Abvew VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1988, total length: 3,500 mm, total width: 2,000 mm, total height: 2,000 mm, Weight: 4.600 kg - Year: 1988 - Documentation available: Yes - CE certificate present: No - Serial number: 14685 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 750 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Manual - Blade gap adjustment: Manual - Table type: Standard table - Transport dimensions: 3500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Kwodpfxsyl Uvps Abvow Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Sheet width: 2050 mm Sheet thickness: 4.5 mm Bending capacity: 4.0 mm Voltage: 400 V Frequency range: 50 Hz Smallest diameter: 210 mm Roller diameter: 140 mm Total power requirement: 2.2 kW Kjdpoyvttvjfx Abvoww Machine weight approx.: 1565 kg Space required approx.: 3240x1200x900 mm

Condition: new, functionality: fully functional, Sheet width: 2050 mm Sheet thickness: 4.5 mm Bending: 4.0 mm Smallest diameter: 210 mm Roller diameter: 140 mm Machine weight approx.: 1530 kg Space requirement approx.: 3220x1200x900 mm Standard equipment: - Central rollers driven by electric motor, planetary gearbox and gear drive - Side-swiveling top roller - Main motor with brake device - Conical bending device - Mobile control panel and foot pedal - CE mark/Declaration of conformity Special equipment: Kedpfoyvtrrox Abvsww - Motorized rear roller adjustment - Digital display for rear roller - Induction-hardened rollers

Condition: new, functionality: fully functional, Sheet width: 2020 mm Sheet thickness: 1.5 mm Opening width: 100 mm Bending angle: 135 ° Machine weight approx.: 1,300 kg Accessories/Equipment: - Machine frame made of welded steel construction - Segmented upper tool - Motorized workpiece clamping - Angle adjustment via handwheel with scale Kwsdpfx Ajyvtnaebvow Special equipment: - Rear stop with manual handwheel

Condition: used, Year of construction: 2020, JCB HTD05 Dumpster, year of manufacture: 2020, operating hours: meter defective, high-tip skip. Engine: Kohler [4.4 kW / 5.9 hp], weight: 515 kg, tipping height: 1,450 mm, width: 706 mm, payload: 500 kg, German vehicle, first owner, in good condition, ready for immediate use. On request, we are pleased to offer you leasing or financing options. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our homepage. Subject to prior sale and errors excepted! Kjdpfx Aoywdfxebvsww = Additional Information = Drive: Rubber tracks Please contact Tobias Ebert for further details.

Condition: used, Year of construction: 2021, operating hours: 1,793 h, Bobcat T770 skid-steer loader, Year of manufacture: 2021, Operating hours: only 1,793h, air conditioning, quick coupler, pallet fork: 1,200 mm, bucket, engine: [68.7 kW/93.4 hp], weight: 1,576 kg, German-spec vehicle, first owner, good condition, ready for immediate use. Ksdpfx Absyv Ultovoww On request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. Further details can be found on our website. Errors and prior sale excepted. Quick-attach system = Further information = Drive: rubber tracks For further information, please contact Tobias Ebert.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition Kodpfxshmmfks Abvsww

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Kwsdpfx Aeycqucebvew Maximum centering dimension: 2,500 mm MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: used, Year of construction: 1998, total length: 4,700 mm, total width: 2,550 mm, total height: 2,300 mm, Cutting bench, cutting shear Type: Hydraulic Manufacturer: GWF Mengele Type: S8-4000 Ksdswnhlqjpfx Abveww Year: 2005 Control: Siemens Simatic Cutting width: 4050mm Cutting thickness: 8mm Electric Backgauge: 1000mm Throat: 180mm Motor-power: 22kW Incl. multiple frontloader-arms: 2500mm Total dimensions: 4700x2550x2300mm Machine-weight: 13000kg Video available - Year: 1998 - Documentation available: No - CE certificate present: No - Transport dimensions: 4700mm x 2550mm x 2300mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 2016, actuation type: pneumatic, sheet thickness (max.): 3 mm, overall weight: 6,700 kg, total length: 5,700 mm, total height: 2,313 mm, input current: 400 A, type of input current: three-phase, working length: 3,200 mm, Equipment: CE marking, We are offering for sale a very well-maintained Schröder PowerBend Professional 3200/3.0. The machine is in excellent condition and is immediately ready for use. • Year of manufacture: 2016 • Working length: 3,200 mm • Usable length: 3,240 mm • Machine depth (with rear stop 1,600 mm): approx. 3,223 mm • Bending beam adjustment: up to 150 mm • Bending center adjustment: approx. ±20 mm • Machine height (with gantry): approx. 2,313 mm • Bending capacity: 3.0 mm (Rm 400 N/mm²) • Rated power: 12 kVA • Pneumatics: 6 bar • Weight: 6,700 kg • Stroke: approx. 500–540 mm • Number of bends so far: approx. 310,000 • Location: 49170 Hagen a.T.W. The control system was recently renewed and is up to date. Kodpfx Aboytnvrsvsww The machine is fully operational and can be inspected by appointment. Other information: Sale as seen Inspection and collection in Hagen a.T.W. by arrangement Location: Hagen a.T.W. Sale by company → without warranty or guarantee, subject to prior sale and errors.

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor Kedpfovuum Nox Abveww as is where is, WITHOUT putting into operation

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Kwjdpfx Abjtyyvwevjw Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Kjdpfxetwgk Ao Abvoww Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics