Used Sheet Metal Clamps for sale (39,626)

Condition: good (used), functionality: fully functional, Year of construction: 2007, Used 2-meter swivel bending machine from Schroder Bwedpfx Aozgtmzom Tsr Type: MAKV Capacity: 2050 x 2.0 mm POS 200 control system Year of manufacture: 2007

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used Jorg swiveling bending machine Type: 3944 Capacity: 2050 x 3.2 mm Adjustable back gauge Complete set of blades Bsdpozgtk Hefx Am Tswr Corner adjustment with potentiometer

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s Bjdpjzru Nzjfx Am Tewr • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. Bwjdpfxjtzkg Ue Am Tsr DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: good (used), Hydraulic tank cap, tank cap -Hydraulic tank cover: from Atlantic ATS 3006 plate shear -Item No.: HMG 400 x 1 H -Dimensions: Ø 440 x 70 mm Bwedpfjykz Rksx Am Tsr -Weight 14.5 kg

Condition: good (used), Sheet metal stack pallet, sheet metal traverse, sheet metal stack shelf -Load capacity: 10 tons -for crane/forklift operation -Dimensions: 3000/1800/H420 mm Bwodpfx Amsb A I R Rs Ter -Quantity: 3 available Price: per piece -Weight per piece: 300 kg

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm Bjdpfxot Hmi Ae Am Tewr -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

Condition: used, Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm Bwjdpfx Amet Hmivs Ter -Weight: 6.8 kg

Condition: excellent (used), Year of construction: 2013, Year of manufacture: 2013 Series 2200 Bwedpfxoy Tu Dks Am Ter

Condition: used, Sheet metal shelf, screw shelf, storage shelf, screw shelf Bwsdeb Hw Dxspfx Am Ter -Execution: stable -Dimensions: 620/1420/H1400 mm -Own weight: 260 kg

Condition: good (used), Stacking boxes, stacking boxes, steel boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers Bodpfefkv Scjx Am Tjwr -Sheet metal container with: lid -Dimensions: 615/800/H910 mm -Weight: 54 kg

Condition: new, Year of construction: 2025, The ZGR1400/2.0 press brake from Prod-Masz is available on-site for testing and immediate purchase. Free delivery up to 150 km. You will receive on-site technical training. -Working width: 1400 mm -Sheet thickness up to 2.0 mm (non-ferrous metals) -Bending angle up to 145° -Throat: 80 mm -Degree scale Bodpfxozmmico Am Tewr -Stop for pre-set bending angles -Sheet metal storage -Front depth stop -Weight: approx. 175 kg -CE certificate -12-month warranty Accessories - Roller shear (up to 0.8 mm): 350 EUR Shipping within Germany: 180 EUR Please note that all prices are subject to an additional 19% VAT. Self-collection is possible. Other dimensions (1000, 1400, 2140, 2640, 3140, 3640, 4140 mm) are available upon request.

Condition: new, Year of construction: 2025, SERVICE CENTER HALVER FOR BENDING TECHNOLOGY. Bjdpfx Amozmmh Es Tjwr Your competent partner for bending machines. We are your contact for high-quality sheet metal processing throughout Germany. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we address the needs of our customers locally and see ourselves as an extension of the production department. If required, the machines can be demonstrated, along with expert advice and professional training. We offer individual advice tailored to your needs and look forward to your inquiry. The Prod-Masz RED2200/0.8 bending machine, mounted on transport rollers with a 60mm/45° cutout, is available for testing and immediate purchase. Technical data: -Working width 2140mm -Sheet thickness - steel up to 0.8mm -Non-ferrous metals 30% greater sheet thickness -Bending angle up to 145° -Bending flange: 15 mm -Throughput: 80 mm -Degree scale -Stop for pre-set bending angles -Storage for sheets -Front depth stop -Weight approx. 250kg Other dimensions (1000, 1440, 2140, 2640, 3140, 3640, 4140mm) available upon request. Please note that all prices are subject to 19% VAT. CE certificate Warranty: 12 months. Self-collection is possible. Accessories: Roller shear 350 EUR Shipping within Germany 180 EUR

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Schröder Powerbend Universal Swivel Bending Machine 2000 x 4 mm Manufacturer: Schröder Group Bwsdszlx Izepfx Am Tor Type: Powerbend Universal 2000 x 4 mm Year of manufacture: 2019 Condition: used, like new Further information available upon request.

Condition: used, Wide belt sander used Make:TimeSaver Series WRB Machine-No. 2480-19 Bjdpfx Asudb R Ijm Tjwr Dry processing deburring/rounding machine machine with contact rollers and a rotating brush unit Max. Working width 1350 mm Sanding belt dimensions WxL 1350x1900 mm Outer brush diameter 530x350 mm Table opening 0.8-100 mm Min. part size 50x50 mm Brush speed 6-17 m/sec. Sanding belt speed 11 m/sec Feed speed 0.2-8 mm Power consumption W 1 unit - 11.0 kW RB unit 1.5 kW Brushes 4x1.5 kW Connection: 400 V 50 Hz Compressed air required 6 bar Total consumption 25 ltr/min. incl. ceramic brush set R plus 350x530 mm and zirconium brush set grain 180 Machine has been completely overhauled New transport mat installed Area of application: Sanding belt rolling unit W: Pre-deburring with sanding belt or Scotch- Bride belt Removal of raised burrs Apply a sanding finish or brush finish, Repair a sanding finish or brush finish RB unit: Deburring and rounding of flat and profiled and profiled parts Weight: 6200 kg

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Bsdpfx Ajzl A Rajm Tswr Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: new, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Bwsdpeucw Rbefx Am Tsr The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: used, functionality: fully functional, Year of construction: 1992, operating hours: 18,922 h, control type: CNC control, Hydraulic pivoting bending machine Manufacturer: RAS, Type: 74.30, 3200 x 4mm Technical data Manufacturer: RAS Type: 74.30 Bwsdpfx Amozhm Nfs Tsr Year of manufacture: 1992 Usable length: 3200 mm Capacity: 4 mm Operating hours: 18,922 h (read) Stroke: 400 mm Adjustability of the lower die: 80 mm Adjustability of the bending die: 80 mm Bending angle setting: 0 – 180° Bending angle accuracy: +/-0.1 mm Motor power: 7.5 kW Dimensions: approx. L 4.50 x W 1.80 x H 2.55 m Weight: approx. 5.8 t Equipment • Controlled back gauge 10 - 1500 mm • CNC control Multibend 9000, with 13" monitor, renewed • Automatic bending die adjustment • Gooseneck support rail, H = 150 mm, L = 3,200 mm, segmented • Bending rail 15 mm • Top bending rail, height 10 mm, L = 2,500 mm, segmented • Top bending rail, radius 17.5 mm, L = 2,500 mm, divided into 10 x 250 mm All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: new, functionality: fully functional, Year of construction: 2025, Laser source - MAX Photonics Table size - 4000x2000mm Bodpfx Aewnqbzem Tjwr Control system - FSCUT 6000 Software - Cypnest+Cypcut Laser head - Boci BLT442 Nitrogen proportional valve - SMC Power stabilizer - 120kVA Water cooler - Hanli Load capacity up to 3200kg Laser power - 12000 W X/Y positioning accuracy - ±0.05 mm/m X/Y repeat positioning accuracy - ±0.03 mm/m Maximum travel speed - 120 m/min Maximum acceleration - 1.5 G CNC control - FSCUT 6000 EtherCAT-BUS Power supply - 380V 50Hz three-phase

Condition: new, functionality: fully functional, Laser source: MAX Photonics G5 Laser head: Boci BLT4 autofocus head Control system: FSCUT 9100 Software: Cypnest+Cypcut Table size: 8200 x 3200 mm Load capacity up to 9600 kg Bodpjwtzu Aefx Am Tswr Straight cutting area: 8850 x 3700 mm Bevel cutting area: 8100 x 3050 mm

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Bedpfx Amsi Ar Rue Tswr Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1500 kg

Condition: good (used), Year of construction: 2015, operating hours: 2,265 h, functionality: fully functional, machine/vehicle number: SN004805, Manufacturer: LISSMAC Maschinenbau GmbH Model: SBM-L 1500 G1S2 2,265 operating hours Machine type: Deburring and edge rounding machine Bedpfozltu Nox Am Towr Working width: 1,500 mm / 2 driven tables Processing: Both sides in a single pass Year of manufacture: 2015 Without dust extraction The machine is being sold due to a plant upgrade. Immediately available Inspection possible at any time by arrangement.

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. The machine is available for inspection and testing; it is live. Please contact us with any questions. Bedpfsv Tnfiex Am Tjwr

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine Bodeb A H R Espfx Am Tjwr -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm -Weight: approx. 800 kg

Condition: excellent (used), functionality: fully functional, number of drawers: 18, total width: 2,650 mm, total length: 8,700 mm, Glass storage / Sheet metal storage Technical data: 3 separate units, each with 6 compartments = 18 drawers Walkable roof & additional storage space Drawer dimensions: 2000 x 1800 x 300 mm, 1300 kg/drawer Dimensions per unit: 2900 x 2650 mm Bwjdszmqi Tjpfx Am Ter Manufacturer: Torgauer Maschinenbau Availability: immediately