Used Shoemaking Machine Milling And Grinding Machine for sale (87,780)

Condition: excellent (used), Milling and grinding machine Make: Brand Type: SP 50 SEO 30 / KS Year of manufacture: 1997 Belt sanding unit KS 30 Belt width: 120 mm Belt length: 2100 mm Belt speed: 14 m/s Profile sanding unit DS 40 Gkjdpfx Aboxmgcvo Ujf 0.75 kW 1000 rpm Spindle stub diameter: 30 x 100 mm

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Gedpfx Asu Dahnjb Uekf High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Gsdpfx Asnxi Uueb Ujkf Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) Godpfx Abeh U Nvko Uskf MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Gsdpfx Abonxi R Uo Uekf Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: good (used), Year of construction: 1995, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm Gksdpecg Al Ssfx Ab Ujf -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - number of working spindles: 6 pcs - spindles pressed pneumatically onto the material - milling units adjustable up/down, right/left, and at angles - 6 pneumatic clamps - stepless feed speed adjustment - max milling height: 130mm - max milling length: 2500mm - max milling width: 330mm - shaft diameter: 40mm Motor power: - milling units 1-2: 2 × 5.5kW - milling units 3-4: 2 × 4.5kW - milling units 5-6 universal (sanding or milling): 2 × 4.5kW - extraction nozzle diameter: 10x152mm - air supply requirement: 6-8 bar - dimensions (L/W/H): 8000x3000x2420mm - weight: approx. 6000kg ADVANTAGES Gkedsw Rv Ahepfx Ab Ujf – Italian manufacture – For through-feed processing of curved elements according to template – 6 milling units – Not repainted – Safety guards – Original DTR + CE documentation – Used machine in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (based on 4.2 EUR exchange rate) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical Data Grinding/Workpiece Diameter: up to approx. 300 mm (partially up to 350 mm) Gksdpextiunjfx Ab Ujf Grinding Length/Stroke: approx. 550 mm (slide travel) Module range (for hobbing cutter resharpening): min. module approx. 0.5 to max. module approx. 25 Number of flutes: typically 1–99 pieces (depending on tool set) Grinding wheel diameter: approx. 150–300 mm Grinding wheel speed: up to about 2,700 rpm Centre distance (workpiece spindle): typical range 400–800 mm Swivel/Pitch range: e.g. grinding wheel head swivel 0–15° Machine weight and space requirement: approx. 4.2–4.9 t weight; space approx. 3 × 2.6 × 2.3 m Electrical data: operating voltage e.g. 380 V three-phase, control 24 V, auxiliary voltage 220 V

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, Gkedpfxev Dxzpo Ab Usf puller for grinding wheel. Machine dealer with own stock of 1600 m².

Condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, grinding wheel diameter: 100 mm, table length: 330 mm, table width: 110 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of the business. Placing a bid obliges the bidder to collect the machine within the specified period from 26.01.2026 to 29.01.2026! Gsdpfsxqnuhsx Ab Uokf TECHNICAL DETAILS Table dimensions: 330 x 110 mm Grinding wheel diameter: 100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 650 x 1,500 mm Weight: 200 kg

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m Godpfx Abewy Ulzj Uekf - Mobile undercarriage - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage

Condition: used, Multi-speed machine with flexible shaft BIAX type MB 4-2 Machine no. No. 9/50/55 Year of construction approx. 1970 Length of the flexible shaft: 2 meters Speed: 900 - 9000 rpm infinitely variable Gedpsfim Tisfx Ab Uekf Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 HP Mains connection: 380 Volt, 50 Hz - Handle straight grinder with collet Ø 6 mm - Swivel and rotatable base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg good condition Universal for milling, grinding and polishing work

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW working width 140 mm Feed below consists of: conveyor belt 8800 x 60 mm bottom conveyor belt 8800 x 40 mm for stem Top feed consists of: Gkedpfoiw D T Iex Ab Ujf Conveyor belt 7140 x 40 mm top Aggregates: pos. 1 - scoring unit 2,2 kW 3000 rpm. pos. 2 - milling unit 3 kW 6000 rpm. pos. 3 - milling unit 5,5 kW 6000 rpm. pos. 5 - belt grinding unit 2,2 kW 120 x 2060 pos. 8 - belt grinding unit 2,2 kW 120 x 2060 / frame grinding belt pos. 4, 6, 7, 9 - profile and edge breaking units Suction connection pieces 5x100 mm, 1x120 mm

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Design: Gkedpswf U Awsfx Ab Usf 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Condition: good (used), Year of construction: 1998, dia. of draw-in collets 17,5 mm internal taper of cone draw-in collets MK 1 , Mk 2, Ga Gkjdpfx Aoxr Raieb Uef speeds of grinding spindle 2800 U/min total power requirement 0,25 kW weight of the machine ca. 67 kg dimensions of the machine ca. 510 x 565 x 290 mm Milling cutter grinder with a base cabinet for grinding milling cutters or styli in a central and offset position. The dividing head holder allows for circular movements in all directions, as well as longitudinal and transverse movements of the tool axis. The tool holder has a 40 mm longitudinal adjustment, a 10 mm lateral adjustment, and a 15 mm fine adjustment of the dividing head holder relative to the grinding spindle. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Godpfx Abexiv Ugj Uekf Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: used, Year of construction: 2001, machine/vehicle number: 467-72, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 630 CNC Pin Grinder Gkjdpfexxybpsx Ab Ujf crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, Year of construction: 1989, - workpiece thickness max. (mm): 55 - workpiece width min. (mm): 80 Gsdok E Hrbopfx Ab Ujkf - Profile depth max. (mm): 80 - inner radius min. (mm): 10 - Edge material thickness max. (mm): 3 - depending on radius and edge material - milling motor: 0,5 kW, 27.000 rpm. - Electricity: 220 V - 1 Ph. - 50 Hz - Connection value (kW): 0,5 - Compressed air connection (bar): 6 - dimensions L x W x H (mm): 850 x 650 x 1430 - working table height (mm): 1000 - buffing unit: for processing thick PVC edges - Weight (kg): approx. 120

Condition: used, Year of construction: 2014, Make: HANDTMANN, Model: HBZ Trunnion 80, Year of manufacture: 2014, Serial No. 200793, Control unit by Heidenhain, Type TNC640, Travel distances X/Y/Z: 850 x 850 x 700 mm, A-axis max. -30/+120°, C-axis 360°, Tool holder: HSK 63A, Max. workpiece size: Ø 850 x 630 mm, Max. workpiece weight: 1,200 kg, 40-position tool changer, NC rotary/swivel table, Table diameter: 800 mm, Maximum spindle speed: 30,000 rpm, Chip conveyor by Knoll, Model 600K-3, Band filter system by Knoll, Electrical cabinet by Knoll, Control defective, Travel paths: 850 x 850 x 700 mm Gjdpfx Abox A U Ule Uskf This machine is part of an online auction. Images will be provided later.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 Gjdpfx Aow Rn Eueb Uokf ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: used, machine/vehicle number: 38206/12, Slot milling machine for sale. 2.2 kW 220/380 V 50 Hz Gkjdpfxsx Arwko Ab Ujf

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 005121946, grinding length: 1,850 mm, table load: 2,700 kg, travel distance X-axis: 2,000 mm, grinding wheel speed: 1,450 rpm, controller model: SIEMENS SINUMERIK 840 Di, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Submitting a bid obliges the buyer to collect the machine within the specified period: between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Longitudinal travel: 2,000 mm Longitudinal grinding length: 1,850 mm Table dimensions: 1,700 x 600 mm Longitudinal feed speed: 1 – 40 m/min Cross travel: 915 mm Maximum cross grinding width: 1,050 mm Adjustable cross feed speed: 0 – 4 m/min Stepped cross traverse: 0 – 40 mm Max. vertical grinding height: 700 mm Grinding wheel speed: 1,450 rpm Gkedpfx Asxqf Sqjb Uef Grinding wheel dimensions: 450 x 100 x 203 mm Permissible table load: 2,700 kg MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 Di Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 56 A Connection: 10 kA Dimensions & Weight Dimensions (L x W x H): 7,000 x 3,300 x 3,000 mm Weight: 13,800 kg EQUIPMENT Magnetic chuck (1,500 x 800 mm) Note: Transport on a truck with a width of 3,000 mm is possible.

Condition: used, Year of construction: 2004, machine/vehicle number: 467-76, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 680 CNC Pin Grinder Gksdpfjxxx Rpex Ab Ujf crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, Year of construction: 2015, Axis 3 Axis 4. Aufetzachse ja weight of the machine ca. 8,5 t Gkedpowlvryjfx Ab Uef

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control Gjdpfx Absxr Ax Do Uekf We do not have any further technical data.