Used Shoemaking Machine Milling And Grinding Machine for sale (95,511)

Condition: excellent (used), Milling and grinding machine Make: Brand Hnedpfx Agjxmgcvj Neu Type: SP 50 SEO 30 / KS Year of manufacture: 1997 Belt sanding unit KS 30 Belt width: 120 mm Belt length: 2100 mm Belt speed: 14 m/s Profile sanding unit DS 40 0.75 kW 1000 rpm Spindle stub diameter: 30 x 100 mm

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Hsdou Dahnepfx Ag Nenu Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Hnjdpfx Aonxi Uusg Neu

Condition: used, Year of construction: 1978, Droop and Rein LFAS130KE Milling Machine Axes: X (Table travel) 3,000 mm, Y (Cross-Rail vertical travel) 1,000 mm, Z (Milling Head Saddle on Cross-Rail travel) 1,500 mm, U (Boring Bar vertical travel) 300 mm. Axes Feeds: X min 20 mm/min, max 2,000 mm/min; Y min 20 mm/min, max 2,000 mm/min; Z min 20 mm/min, max 2,000 mm/min; U manually. Note: The X, Y, Z axes are equipped with linear encoders. On the control panel there is a display unit (DRO) for the X, Y, Z axes. For the U axis, direct viewing on a graduated ruler is used. Moving Table Load: max. 20,000 kg/m (uniform distribution on table surface). Moving Table usable surface: 4,000 × 1,600 mm. Moving Table total surface: 4,900 × 1,600 mm. Distance between Table and Cross-Rail: max. 1,200 mm. Machine Weight: approximately 50,000 kg. Overall Dimension of the Machine: L × W × H = 10,000 × 5,000 × 5,300 mm. Machine was made by DROOP & REIN, Germany, in 1978. Accessories include a 4-position at 90-degree Milling Head. Retrofitted in 2000 Coolant System: Yes. Not functional. Hedpfx Agjxnc N Ij Nonu

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) Hsdpfx Agsh U Nvkj Nsnu PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Hedpfx Aenxi R Ueg Nenu Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Year of construction: 2006, condition: excellent (used), Swing angle 135 Motor 1.1 kW table height 860 mm table surface 800×1000 mm spindle dimension 28 x 90 mm spindle speed 1500 rpm with feed unit: Fields S/308, year 2011 and accessories Hnedpfxehr D Ayj Ag Nou

Condition: used, Year of construction: 1997, Catalogue number 7724 TECHNICAL DATA - Number of operating spindles: 6 pcs - Spindles pneumatically pressed onto the material - Milling units adjustable up/down, right/left and at an angle - 6 pneumatic clamps - Infinitely variable feed speed adjustment - Max milling height: 130 mm - Max milling length: 2500 mm - Max milling width: 330 mm - Shaft diameter: 40 mm Motor power: - Units 1-2 milling: 2×5.5 kW - Units 3-4 milling: 2×4.5 kW - Units 5-6 universal (sanding or milling): 2×4.5 kW - Extraction nozzle diameter: 10x152 mm - Air requirement: 6–8 bar - Dimensions (L/W/H): 8000x3000x2420 mm - Weight: approx. 6000 kg ADVANTAGES Hjdpfx Agow Rv Ahs Njnu – Italian production – For through-feed processing of curved elements according to template – 6 milling units – Unpainted – Safety covers – Original technical documentation DTR + CE – Used machine, in very good condition Net price: 46,900 PLN Net price: 11,030 EUR depending on exchange rate 4.25 EUR (Prices may change with larger fluctuations)

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage Hnjdpfxjwy Ulzo Ag Neu - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage

Condition: used, Multi-speed machine with flexible shaft BIAX type MB 4-2 Machine no. No. 9/50/55 Year of construction approx. 1970 Length of the flexible shaft: 2 meters Speed: 900 - 9000 rpm infinitely variable Motor speed: 3000 rpm Motor power: 1.2 kW = 1.5 HP Hodpfx Asfim Tijg Nonu Mains connection: 380 Volt, 50 Hz - Handle straight grinder with collet Ø 6 mm - Swivel and rotatable base - Transport trolley with 2 drawers Overall dimensions: 850 x 550 x 1100 Weight: approx. 80 kg good condition Universal for milling, grinding and polishing work

Year of construction: 1995, condition: used, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW Hnjdjcg Al Sjpfx Ag Nju -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg

Condition: used, dia. of draw-in collets 4 - 24 mm max. radius to grind 12 mm grinding range 4 - 24 mm grinding wheel-diameter 100 mm total power requirement 0,4 kW weight of the machine ca. 100 kg dimensions of the machine ca. 1 x 0,6 x 0,4 m Machine has 19 clamping devices 4-14 mm, 12 pieces of grinding wheels 100 mm, Hnjdpsv Dxzpefx Ag Nsu puller for grinding wheel. Machine dealer with own stock of 1600 m².

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW working width 140 mm Feed below consists of: conveyor belt 8800 x 60 mm bottom conveyor belt 8800 x 40 mm for stem Top feed consists of: Conveyor belt 7140 x 40 mm top Aggregates: pos. 1 - scoring unit 2,2 kW 3000 rpm. pos. 2 - milling unit 3 kW 6000 rpm. pos. 3 - milling unit 5,5 kW 6000 rpm. pos. 5 - belt grinding unit 2,2 kW 120 x 2060 pos. 8 - belt grinding unit 2,2 kW 120 x 2060 / frame grinding belt pos. 4, 6, 7, 9 - profile and edge breaking units Hnedpfx Agsiw D T Is Nju Suction connection pieces 5x100 mm, 1x120 mm

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Design: 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW Hjdpfx Ajwf U Awsg Njnu 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Year of construction: 2003, condition: as good as new (ex-display), Exhibition machine: ACETI AC 02 Stationary edge milling and belt sanding machine Sanding belt: 120x1500mm Machine is in our showroom in Kobenz. Machine is as good as new and not run! Power: 1,8 KW Weight: 120 KG Size: 700 x 600 x H. 1600 mm Hnedjiknxgopfx Ag Nju Data grinding unit: Contact rollers: 135 mm diameter Cutting speed: 10 - 20 m/sec dimensions of working surface: 120 x 470 mm Data edge milling unit: Chamfer angle: 15° - 45° cutter diameter: 80 mm dimensions of the support: 100 x 500 mm

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Hjdpfx Agexiv Ugs Nenu Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition; the machine is from a correctional facility and has been idle for the last several years. It was used only minimally and operated by a single person. Everything is in perfect working order. All bearings and guides are in good condition. Year of manufacture: 1989. The machine features a top-mounted control panel. The fence allows one fence jaw to be adjusted in depth with fine adjustment and scale, enabling tasks such as jointing or glueing profile work. The entire fence can also be depth-adjusted using a handwheel and threaded spindle, allowing for very precise and fast settings. Additionally, one of the two fence jaws is tiltable. Hnedexn A H Tspfx Ag Neu Spindle lock is engaged via a lever. Excellent chip extraction with two suction ports: 125mm at the fence and 100mm at the machine table. Equipped with a 30mm spindle, steplessly tiltable from -5 to 45°. The tilt adjustment is electric and displays digitally. Reversible spindle rotation (clockwise/counterclockwise). Nationwide personal delivery and demonstration within Germany for €220—risk-free purchase. Shipping to Austria and the rest of the EU available upon request. Large table opening up to 480mm, adjustable via reducing rings (allows safe machining with both large and small diameter cutters). Four spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with digital display. Table is made from heavily ribbed cast iron. Spindle can be changed (a 40mm spindle can also be fitted). Very heavy-duty and durable design, built for the most demanding milling operations. Suitable for all milling tasks. Optimal power transmission via V-belt drive. Supplied with manual and documentation. With STEFF 3-roller power feed, type 34. The power feed offers reversible rotation and four feed speeds; the feed rollers are individually mounted. Table size: 1180mm wide x 800mm deep. Ready for immediate operation. 380V, 5000W and 6000W (due to two speed settings). Complete with all necessary safety equipment, motor brake and emergency stop. Certified by the Wood-BG, bears the GS safety mark. Machine weight: approx. 1200 kg. Equipped with motor overload protection switch. Professional-grade equipment, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: used, width of the strips 100 mm band length 920 mm engine output 0,35 kW saw band speed 7 m/sec. Hnodpfxjhrz Ews Ag Nsu Table surface 300 x 150 mm roll diameter 58 mm dimensions 460 x 400 x 210 mm voltage 380 V weight of the machine ca. 15 kg Equipment: - Table model - 1 grinding belt - Steel grinding table with planed surface - Belt alignment via two Threaded rods with star grip

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 693 / 90, TECHNICAL DETAILS Clamping surface: 600 x 250 mm Hnjdpfx Asxl S H Rjg Nsu EQUIPMENT YZ positioner Paper band filter system

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm Hjdpfxsxcg Hmo Ag Nonu total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m

Condition: used, Year of construction: 1998, Technical data: Grinding surface (including grinding wheel width 50 mm): 700 x 320 mm Grinding height: 400 mm Longitudinal stroke: 740 mm Cross stroke: 270 mm Table clamping surface: 1000 x 250 mm Distance from table to spindle center: 650 mm Rotary table diameter: 200 mm Table load, max.: 400 kg Spindle drive, infinitely variable: 6 kW Grinding wheel dimensions, max.: ø300 x 60 x 127 mm Coolant system: 170 l Weight - entire equipment: 4600 kg Equipment: - Fully electronic multi-axis control system Brand NE (manufactured by Schleier) - Brushless AC servo and spindle drives - Manual adjustment of the numerically controlled axes via movable electronic Handwheel, axis selection, quick adjustment +/- and digital increment display integrated in the handwheel. - Free-standing electrical cabinet including operating hour counter - Cooling unit - Automatic central lubrication - Work area paneling Hjdsvt Sw Nopfx Ag Nsnu - Oil drip trays - CE compliant Accessories: - 1 grinding wheel, ø 600 x 60 x 127 mm - 1 grinding wheel flange - 1 removal device for grinding wheel flange - 1 balancing mandrel - 1 set of support plates and screws for adjusting the machine - Raised vertical column - Rotary table, make Lehmann EA 110.3A with CNC control CPS 20

Year of construction: 1982, condition: ready for operation (used), Main Drive Number of axis 3 Hnjdpfxsw Sy Nns Ag Neu Additional Equipment Included in delivery: Magnetic clamping plate (700 x 300 mm), belt filter This 3-axis BRANDT FS 735 surface grinding machine was manufactured in 1982. It features an automatic grinding program tailored for small to medium-sized series, enhancing productivity without automatic dressing. Included is a magnetic clamping plate measuring 700 x 300 mm and a belt filter. Consider the opportunity to buy this BRANDT FS 735 surface grinding machine. Contact us for more information about this machine. Application Types Grinding

Condition: used, Surface Grinding Machine, Precision Surface Grinder BRAND (Switzerland) Model FS 735 Machine No.: 322 82 Year of manufacture: 1982 Electro-magnetic chuck 700 x 300 mm Grinding length 700 mm Grinding width 300 mm Cross travel max. 340 mm Table longitudinal travel max. 750 mm Distance spindle center to magnet max. 400 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel width 60 mm with single-sided recess in the grinding wheel Grinding wheel bore 127 mm Table longitudinal feed 0 - 30 m/min, stepless Table cross feed per pulse 1 to 10 mm Rapid cross traverse 340 mm in 6 sec Vertical infeed 0.001 - 0.055 mm Vertical rapid traverse 150 mm/min Grinding wheel speed 2500 rpm Grinding wheel surface speed 39 m/s Spindle drive motor power max. 5.7 kW Hydraulic motor power 1.5 kW Power supply 400 Volts, 50 Hz, approx. 7 kVA - Stepless grinding wheel speed adjustment - Automatic depth infeed - Automatic table cross feed, hydraulic and mechanical handwheel for table cross movement Hsdpon Saf Njfx Ag Nenu - Hydraulic clamping for the cross movement - Hydraulic table longitudinal movement - Hydraulic dressing device - Electromagnetic chuck BRAILLON, Type BJP 700 x 300 mm, overall height 100 mm, continuously adjustable magnetic force - Centralized oil lubrication - BEDA band filter system with coolant tank and pump standing beside, L x W x H = 1600 x 650 x 1100 mm - Separate hydraulic unit with electrical cabinet, L x W x H = 1800 x 750 x 1700 mm - Machine equipped with one grinding wheel Ø 295 mm, width 50 mm - Two additional grinding wheel holders with grinding wheels (internal diameter 127 mm) - One grinding wheel puller Required space for surface grinder L x W x H 2200 x 1800 x 2350 mm Weight of surface grinder approx. 3100 kg Weight of hydraulic unit 500 kg Weight of band filter system 200 kg Space requirement on pallet 2700 x 2200 x 2500 mm Total weight with pallet approx. 4000 kg Good condition

Year of construction: 1979, condition: good (used), Flat grinding machine make Brand Type: Compact 600/800 with Heidenhain control We do not have any further technical data. Hsdpfxow R S Dhs Ag Nsnu

Condition: used, Surface Grinding Machine, Precision Surface Grinding Machine BRAND (Switzerland) Type Mini 500 machine no.: 505/86 year of construction 1986 Electro magnetic clamping plate 450 x 200 mm grinding length 500 mm grinding width 240 mm cross movement 220 mm table longitudinal movement 550 mm distance spindle center - magnet max. 350 mm grinding wheel diameter 225 mm grinding wheel width max. 25 mm grinding wheel bore 50,8 mm table longitudinal feed 0,5-24 m/min infinitely variable table cross feed pulse 0,05-30 mm cross feed 10 - 1000 mm/min. vertical infeed 0,001 - 0,05 mm vertical dividing feed 600 mm/min. Grinding wheel speed 2820 rpm. Grinding wheel speed 33 Vm/sec. motor power grinding spindle 2,2 kW Motor power hydraulics 1,1 kW mains connection 400 Volt, 50 Hz, 9,5 kVA - automatic depth infeed, vertical infeed - mechanical handwheels for axis movements - hydraulic longitudinal table movement - electromagnetic plate WAGNER 450 x 200 mm, height 73 mm - central lubrication - belt filter system with coolant tank and pump adjacent L x W x H = 1300 x 500 x 650 mm - 2 pieces additional grinding wheel holders for grinding wheels with 50,8 mm inner diameter - 1 piece balancing shaft and 1 piece grinding wheel puller - hydraulic power pack L x W x H = 700 x 300 x 750 mm space requirement L x W x H 2000 x 1400 x 2250 mm Hnedpfod Nrqfsx Ag Nou weight approx. 1600 kg good condition