Used Shredders for sale (964)

Condition: used, machine/vehicle number: 13210, Rotor diameter: 750 mm Rotor width: 1500 mm Number of rotor blades: 76 Rcsdpfey Di R Tox Alcjf Number of stator blades: 4 (1 row) Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 2 x 75 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Rjdpeyr Tttofx Alcjcf Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: good (used), Year of construction: 1995, shredding by 3 HARDOX-coils (spirals) diameter x length: approx. 500 x 1.700 mm opening: approx. 1.100 x 1.700 mm new base frame with steel construction Rcodpfxjl I Dx Ne Alcsf new feed-hopper 8 m³ new control cabinet incl. 7 unused spare coils

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start Rcedpfx Ajdwktkjlcef - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Year of construction: 2006, operating hours: 3,000 h, functionality: unexamined, machine/vehicle number: 49291, rotor diameter: 890 mm, rotor length: 1,500 mm, power: 400 kW (543.85 HP), type of input current: three-phase, input voltage: 400 V, An industrial shredder manufactured by ELDAN Recycling A/S, based in Faaborg, Denmark, is available for purchase. This equipment is designed for size reduction of light waste streams, electronic scrap, and non-ferrous metals. -Rotor Mechanism and Cutting Components The processing mechanism consists of a rotor housing containing a main shaft equipped with 18 guide plates and 2 end plates, which are secured by keys. The machine features 36 vertical-flex ring hammers distributed across 4 secondary shafts, providing 2 rings per main guide plate. When the rotor spins, centrifugal force drives these rings into an outward position. When feed material is introduced, the rings dynamically retract between the rotor plates to absorb impact, returning to their outward position once the material passes. The drive torque is transferred smoothly to the shredder via a hydraulic coupling to effectively handle shock loads. -Material Applications and Feed Capabilities The Shredder Type S1500 is engineered to process light waste materials, including: Telecommunication equipment scrap Rcodjzqywhspfx Alcjf Electronic waste and WEEE Sheet metal, turnings, and general metal scrap Aluminum parts The maximum dimensions for input material are approximately 1000 mm in length, or a maximum surface area of 600 x 600 mm for sheet metal with a thickness of 2 mm. These feed dimensions apply when the machine is operated with screen grates measuring 40 x 105 mm or 25 x 105 mm. Using smaller screen sizes requires a reduction in feed volume to prevent equipment overload. -Maintenance and Accessibility Features The shredder housing is split into an upper and lower section connected by standard bolt configurations. The upper section and the attached feed hopper open via hydraulic cylinders, allowing direct access to the rotor for maintenance and inspections. The lower housing contains the impact bars and supports two screen holders, which contain 2 and 3 screen segments respectively. Both screen holders are independently operated by hydraulic cylinders to facilitate quick access and grate changes. The original technical manual covering operating procedures, maintenance instructions, and lubrication schedules is available with the machine. Serial number 49291. Contact for pricing, location details, and inspection scheduling. The following parts are included: - housing - intake hood - chassis - 3 rotors - hydraulic group - electric motor + hydro coupling More photos are available upon request. An on-site visit is possible.

Condition: refurbished (used), Attachment shredder for mobile EXTEC screening machine e.g. for EXTEC 5000S, Turbo, Turbotrac, S-Series) Rcsdpfx Alsu Dhkdscof for pre-shredding cohesive/clumpy material

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Technical data: - Total power: 31.7 kW - Shredder motor: 7.5 kW - Feed width: 550 mm Redpfx Aezrx Hdjlcjcf - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h

Condition: good (used), Slow-speed machine with walking floor Rotor width: 1 m Redpfxsyu U Spe Alcjcf Motor: 22 kW

Condition: excellent (used), Catalog number: 8043 TECHNICAL DATA - inlet width 450mm - inlet height 250mm - shaft width 530mm - shaft diameter 450mm - blade length 530mm - number of blades 2 pcs - screen dimensions 50x50mm - toothed bottom pulling shaft 2 pcs - bottom shaft motor 0.75kW - toothed top pulling shaft - top shaft motor 0.78kW - main motor 45kW - conveyor belt 0.12kW - belt dimensions length 5150x width 620mm Rcjdpfx Alszu Sd Uocef - conveyor belt dimensions 5200x650x800mm - machine dimensions length/width/height 2620x1650x1220mm - weight approximately 2500kg ADVANTAGES – German-made – 5150mm conveyor belt – used shredder, good condition Net price: 65900 PLN Net price: 15690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm Rcedpfx Ajzu R Urjlcsf - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm - Weight: approx. 2000kg ADVANTAGES – Italian manufacture – Non-painted – Electric adjustment of body height – Used multi-blade saw, very good condition Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)

Condition: used, Year of construction: 2010, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Price: On request - Year: 2010 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0509 - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Rjdoxixitjpfx Alcecf

Condition: used, Year of construction: 2003, operating hours: 10,120 h, total length: 1,800 mm, total height: 1,700 mm, total width: 1,200 mm, Colour: Grey Empty weight: 1.300 kg Price: On request Shredder Untha LR 630 Rsdpfjwh Na Nex Alcecf Year of construction 2003 Input opening: 624 x 792 mm Throughput speed: material and sieve dependent Rotor diameter: 248 mm Rotor speed: 86 - 96 rpm Engine power: 15 kW Cutting system: 17 knives Sieve diameter 24mm Transport dimensions 1800*1200*1700mm (L*W*H), Weight 1300kg - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: LR632318 - Operating hours: 10120 - Transport dimensions: 1800mm x 1200mm x 1700mm (l x w x h) - Transport weight [kg]: 1300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Colour: Grey Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rcedpfxewu Uy Ie Alcjf Yorick Diebels

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 26 kW (35.35 HP), overall weight: 900 kg, fuel type: diesel, color: red, axle configuration: 1 axle, empty load weight: 900 kg, fuel: diesel, Equipment: trailer coupling, === KEY SPECIFICATIONS === Year: 2013 Machine type: Mobile wood chipper Maximum wood diameter: 160 mm Feed opening: 160 x 221 mm Chipping principle: Disc system Feed rollers: 2 horizontal feed rollers Chip length: 4–10 mm Capacity: Up to 8 m³/h Engine: Lombardini diesel Engine power: 26 kW / 35 hp Rcodpozrfixefx Alcef Operating weight: 900 kg Dimensions: 3573 x 1416 x 2440 mm CE certification: Yes === EQUIPMENT & FEATURES === TP PILOT No-Stress system TP STARTER automatic coupling system Hydraulic feed roller speed control Two cutting blades Horizontal and vertical counter knives Single-axle mobile trailer Overrun braking system Galvanized stabilizer leg Adjustable discharge chute === CONDITION === Used condition with visible signs of professional use. The machine shows scratches, paint wear and surface corrosion, as shown in the photographs. Inspection and operational testing are possible by appointment. === DESCRIPTION === 2013 TP TP 160 Mobile diesel wood chipper designed for processing branches and green waste up to 160 mm in diameter. Equipped with two horizontal hydraulic feed rollers, a disc chipping system, TP PILOT No-Stress control and an adjustable chip length from 4 to 10 mm. The single-axle mobile trailer configuration makes the machine suitable for forestry, landscaping, groundcare and vegetation management applications. === PRICE, LOCATION & DELIVERY === Price: €12,500 Location: Sittard, the Netherlands Delivery terms: EXW Worldwide transport can be arranged by Collé Rental & Sales.

Condition: good (used), Year of construction: 1998, functionality: fully functional, COMAFER BRIO 280 GRINDER Main motor power: 5.5 HP - 380V • Loading opening: 680 x 500 mm Rcodozwf H Uopfx Alcjf Compressed air. Extra cutting steel included. Perfect for grinding carpentry waste. Transport throughout Europe at a good price.

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Rcjdjy T Hbbopfx Alcsf

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Rodpfsyddyzjx Alcscf

Year of construction: 2016, condition: ready for operation (used), Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible. Rodpoubyyvsfx Alcocf

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Rcjdpfx Aeu Nlkxjlcsf

Year of construction: 2021, condition: ready for operation (used), A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Rcedpfx Aloymfc Necjf

Condition: ready for operation (used), Year of construction: 2004, One shredder is available, blade width: 3x 46mm, power: 30kW. Redpfx Ajh A Rquslcscf

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Location: Rodpfx Aozuf U Tslcjcf

Condition: new, The price/performance ratio of this model is very good; it is easy to operate, reliable, and has low maintenance costs. Modern PLC control including control cabinet & cable (5 m) Segmented push floor Sieve basket with replaceable sieve Foreign object detection/overload protection Automatic shutdown Potential-free contact CE Motor power: 15.0/18.5/22.0 kW, 400 V, 50 Hz Rotor width: 915 mm Rotor diameter: 325 mm Cutting blades: 40 pcs (30 x 30 mm, hollow ground) Counter blade: 1 Sieve size: 7 - 40 mm (round or square, other sieve sizes upon request) Infeed hopper in standard size 920 x 1220 mm Extraction connection 200 x 200mm Dimensions L x W x H: approx. 2,320 x 1,500 x 1,890 mm Weight: approx. 1,980 kg OPTIONAL: Rcsdpsza Erkefx Alcof additional row of cutting blades on the rotor second counter blade cutting blades, sieve, counter blade made of special steel hopper dimensions according to customer requirements hopper with pneumatically opening lid Note regarding used machines: • Errors and omissions in technical data and subject to prior sale. • Prices quoted are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 8041 TECHNICAL DATA - shaft width 240mm - shaft diameter 260mm - inlet width 250mm - inlet height 120mm Rcedezkvhiopfx Alcef - number of knives 9 pcs - automatic reversing with adjustment capability - screen dimensions 30mm - toothed drive shaft (bottom) 0.75kW - toothed drive shaft (top) 0.75kW - with conveyor belt 2060x260mm - feeder motor with conveyor belt 0.55kW - main motor 15kW - feeder dimensions (length/width/height) 2270x700x600mm - machine dimensions (length/width/height) 1550x850x700mm - weight 800kg ADVANTAGES - German production - automatic reversing with adjustment capability - with conveyor belt - very good condition - used shredder Net price: 29900 PLN Net price: 7119 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8039 Redpfozkvgljx Alcscf TECHNICAL DATA - inlet width 320mm - inlet height 160mm - roller width 320mm - blade length 310mm - number of blades 2 pcs - toothed drive roller, top - toothed drive roller, bottom - vibratory feeder with magnet 1650x310mm - automatic reversing - main motor 22kW - feed motor 2×1.1kW - machine dimensions with vibratory feeder (length/width/height) 2600x1500x1800mm - machine and vibratory feeder weight approximately 1500kg ADVANTAGES – Austrian made – vibratory feeder with magnet 1650mm – automatic reversing – original DTR documentation – used shredder, very good condition Net price: 34900 PLN Net price: 8310 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)