Used Shutters Sale for sale (26,160)

Condition: excellent (used), functionality: fully functional, pneumatic clamps automatic material feeding Djdpfxsyxcz Ue Ab Dscl unit angle regulation pneumatic movement of heads material support slot length regulation slot distance regulation

Condition: new, Diameter 300 mm Dcedsitvf Eopfx Ab Del Transport dimensions 850x300x3540 mm Weight 10 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Djdpfx Asyniz Eeb Decl Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Designed for bundle cutting of roller shutter slats, setwise cutting of roller shutter boxes, cutting of side rails and set cutting of monoblock roller shutter boxes. • Clean surface cutting thanks to high saw speed • Roller conveyor system, right and left 3 meters each, 2 units • Saw cutting speed is adjustable • All roller shutter boxes up to a maximum of 350 mm can be cut • Precise cutting thanks to the linear guide system • Saw blade diameter Ø550 mm OPTIONAL • Cooling system • Capability to operate with digital meter Dcsdpfx Aberamzfo Dsl

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Dedpfx Ajzxrkiob Docl Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: used, Salvage rough terrain forklift Br 30 Bj 1985 Dsdpfsyvtu Tsx Ab Dscl Timekeeping Lifting capacity 3000kg Raise height 3.00 meters

Condition: used, Salev brand forklift, model C 120, 12-ton capacity, Deutz engine, overall good condition. Djdpfxoztu U Hs Ab Dscl

Year of construction: 2022, operating hours: 396 h, condition: good (used), functionality: fully functional, machine/vehicle number: MFT300, for small/medium capacities minimal setup time intuitive operation easy tool change – any shape with a flat base is possible perfect spheres achievable with extension via rolling machine very high weight accuracy compact design/small footprint fast and easy cleaning high flexibility – adaptable to different recipes shaping by molding technology – no cutting, no scrap Dsdpfxoxbtwve Ab Decl stand-alone unit or integrated into a production line highly efficient – space/labor/consumption modular extensions available The machine is used for shaping semi-plastic molded articles in the food sector. The molding mass is manually fed via a filling hopper and may consist of vegetable and animal oils or fats, as well as water, emulsifiers, starch, gelatin, coloring agents, etc. These may include, for example, marzipan or molding masses of similar consistency and composition.

Year of construction: 2006, condition: good (used), Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (from Glasmek AB Sweden renovated in 2010) Manufacture: Ashton Industrial Sales LTD / UK year of manufacture approx. 2000 Professional Heavy Duty Seaming /Arrissing Machine 2x Diamond belt cross belts High speed abrasive and diamond grinding belts 400 V , 50 Hz castor ball tables for easy movement of the glass sheets. Djdpfoh E T N Ejx Ab Dscl Table dimensions: L x W X H = 3,85m x 1,20m x 0,9m Weight 600 Kg CE marked

Condition: used, axle configuration: 2 axles, first registration: 01/2000, tire size: 275/70, color: other, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - Air Suspension - Side Doors = More information = Tyre size: 275/70 Make axles: BPW Djdpfx Abezxcqae Docl Rear axle 1: Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Empty weight: 11.320 kg Carrying capacity: 20.680 kg GVW: 32.000 kg Ask about the lease options Registration number: OG-25-FL

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Dedezivhtopfx Ab Dscl Prices available upon request.

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. Dedpsvgu D Sofx Ab Decl The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: new, Year of construction: 2026, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button Dcjdpfxowktm Ee Ab Del (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Condition: used, maximum load weight: 13,340 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2007, Container No. G0124686_1 – Manufacturer: Krone. * Simple corner fittings * Roller shutter door (aluminum) Dsdpfx Abszyxm Te Dscl * Fixed support legs * Device for rail loading * Lashing points Weatherproof storage container, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Underframe with signs of wear, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Deformations/stops on components – see images. Dimensions are approximate. Offer subject to change; we reserve the right of prior sale. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,270 mm, loading space width: 2,425 mm, loading space height: 2,740 mm, loading space volume: 48 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2007, Vehicle No. G0124685_1 – Manufacturer: Spier. * Double corner brackets * Roller shutter door (aluminum) * Side walls with partially integrated folding tables * Forklift accessible * Fixed support legs * Device for rail loading Storage container: weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs required. Substructure galvanized. Isolated paint chipping on components of the demountable body. Deformations/stops on components – see images. Dimensions are approximate. Offer subject to change, sale is subject to prior sale. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email. Dcsdpfx Aszyxndeb Dsl

Condition: used, maximum load weight: 13,320 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Vehicle No. G0124503_1 - Manufacturer: Krone. * Double corner fittings * Roller shutter door (aluminum) * Side walls with keyhole profile * Forklift accessible * Fixed support legs * Lashing points Djdezx Nfkjpfx Ab Djcl * Partially equipped with keyhole system inside Storage container: weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use without further repairs. Undercarriage shows signs of use. Isolated paint chipping on components of the interchangeable body. Isolated minor rust on components of the interchangeable body. Deformations/stops on components - see pictures. Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich panel construction Equipment: - Sink - Electric heater - Refrigerator Net: €9,151.26 / Gross: €10,890.00 Article number: BBC113372123.01 Dedpfx Abszy Dfze Docl Technical data: • Brand: Blyss • Model: Comfort • Vehicle type: Site trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 210 x 230 cm • External dimensions (L x W x H): 542 x 222 x 290 cm • Permissible total weight: 1,300 kg • Unladen weight: 830 kg • Payload: 470 kg • Chassis: High loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Welded frame, hot-dip galvanized • V-drawbar • Chassis ALKO • Braked rubber spring axle • Ball coupling • Support wheel • Electrical system - 13-pin 12V connector • Downpipe supports with bracket - 4 pcs • Multiplex wood floor • Walls - 25mm sandwich panel, smooth laminate, RAL9016 color • Ventilation grilles - 2 pcs • Entrance door in the front wall • Entry step made of tread plate • Window in the rear wall with shutters • Socket • Switch box • 230V electrical installation • Double sockets - 3 pcs • Ceiling light - 1 pc • Table and benches for 4 people • Shelf above the window • Built-in refrigerator • Sanitary module (1.5-chamber stainless steel sink, faucet, 5 l boiler, 2 x 19 l canisters for clean and dirty water, soap dispenser, paper towel dispenser) • Clothes rail - 4 hooks • Curtain rod with fireproof curtain • Electric heater 2000W • Towing handles - 2 pcs _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: ready for operation (used), Year of construction: 2023, operating hours: 14 h, laser power: 25 W, total width: 405 mm, total height: 421 mm, overall weight: 37 kg, product length (max.): 260 mm, This 3-axis KEYENCE MD-X2500A laser marking machine was manufactured in 2023. It features a marking area of 125 x 125 x 42 mm and a maximum scan speed of 12,000 mm/s. The machine operates with a YVO4 laser type and offers a laser output power of 25 W. If you are looking to get high-quality marking capabilities, consider the KEYENCE MD-X2500A machine we have for sale. Contact us for further details. Dcedpozqth Tefx Ab Dol - Marking Laser Type: YVO4 laser, Class 4 Laser Product- Wavelength: 1064 nm- Laser Output Power: 25 W (Measured: 24.90 W on Feb 27, 2026)- Q-Switch Frequency: CW (Continuous Wave), 1 to 400 kHz- Distance Laser: Semiconductor laser (683 nm, 5.0 mW, Class 3R)- Guide Laser / Working Distance Pointer: Semiconductor laser (655 nm, 1.0 mW, Class 2)- Marking Area: 125 x 125 x 42 mm- Standard Working Distance: 189 mm (±21 mm)- Marking Resolution: 2 µm- Scan Speed: Max. 12000 mm/s- Rated Voltage & Power Consumption: 100 to 240 VAC ±10% (50/60 Hz), 850 VA max.- Operating Temperatures: Ambient 0 to 40°C (Storage: -10 to 60°C)- Enclosure Rating: IP64 (Marking Head)- Cooling Method: Forced air cooling- Dimensions & Weight (Controller): 260 x 405 x 421 mm; Weight: 23.0 kg- Dimensions & Weight (Marking Head): 145 x 432.5 x 230 mm; Weight: 13.8 kg- Controller Operating Time: 14–15 hours- Laser Operating Time: 13–14 hours- Scanner Operating Time: 0 hours- Shutter Operations Count: 36–40- Total Marking Count: 52–55- Included / Scope of Delivery: Marking Head, Controller, Z Tracking Add-in (MD-AD-ZT), 3D Function Add-in (MD-AD-3D), Marking Builder Plus Software (MB-PH1 Ver 2.4.0), User Manuals, Original KEYENCE Packaging

Condition: used, For sale: a demountable warehouse with loading docks of approximately 234 m², located in Dordrecht. A practical and versatile commercial space that is ideally suited for transport, distribution, storage, or expansion of your current business activities. Dedpfozx Sd Nsx Ab Djcl 🔧 Demountable & flexible The building is constructed as a demountable steel structure, offering an interesting solution for entrepreneurs looking for a flexible commercial space. ⚠️ Please note: the sale only includes the demountable commercial building. No land or plot is included. 📐 Dimensions • Length: 36 meters • Width: 6.5 meters • Area: approx. 234 m² • Ridge height: 4.30 meters • Eave height: 4.00 meters 🚛 Equipped with excellent loading and unloading facilities • Steel structure • 8 roller shutter doors of 3 x 3 meters • 8 loading bays / loading docks • Loading docks equipped with flaps • Impact protection • Shock absorbers 💼 Ideal for ✔️ Transport companies ✔️ Logistics & distribution ✔️ Storage ✔️ Entrepreneurs looking for extra commercial space ✔️ Expansion of existing business activities Practical, spacious, and immediately ready for use. With 8 loading docks and 8 roller shutter doors, this building offers ample opportunities for companies where efficient loading and unloading is a priority. 📍 Dordrecht Interested? Contact us for more information or to arrange a viewing. 📩 Send a non-binding message for more information!

Condition: used, functionality: fully functional, mileage: 274,460 km, power: 132.39 kW (180.00 HP), first registration: 05/2011, fuel type: diesel, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, trailer coupling, MAN TGL 8.180 ROLLER SHUTTER - Manufacturer: MAN - Type: TGL 8.180 - Roll-up door - First registration: 19.05.2011 - Kilometers: 274.460 km - Gross vehicle weight: 7.500KG - Power: kw/hp 132/180 - Gearbox: Manual gearbox - Euro: 5 - German vehicle YES - German papers YES Dodpfxou Et Ahe Ab Dscl - Ready for immediate use YES You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: excellent (used), functionality: fully functional, mileage: 323,098 km, power: 125 kW (169.95 HP), first registration: 02/2011, empty load weight: 4,400 kg, maximum load weight: 800 kg, overall weight: 5,200 kg, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: air conditioning, Iveco Daily 50C17/Industrial CCTV Sewer Inspection Vehicle • Manufacturer: Iveco • Type: C50V • Mileage: 323,098 km • First Registration: 02.2011 • Power: 125 kW/169 hp • Transmission: Manual • Wheel Arrangement: 4x2 • Air Conditioning • Electric Winch, Rear • Maikese by Hein & Haus • 1x Crawler Unit: ITV CT 100 SX-C • 1x Crawler Unit: ITV CT 100 ROTO • 1x Crawler Unit: ITV CT 150 W • 1x Crawler Unit: ITV 100 SX-C • 1x Crawler Unit: ITV 100 ROTO • 1x Drain Hook • 1x Deflection Pulley, Top • 1x Deflection Pulley, Bottom • 1x Pan and Tilt Camera: Roto CS65 • 360° Rotation • +/- 135° Pan Range • Remote-Controlled Focusing • Automatic Aperture via Shutter • 1x Rotomatic-CSZ (Zoom) • 360° Rotation, Continuous • 270° Pan Range • 40x Zoom • Pivoting Halogen Lighting • Automatic Aperture via Shutter • Automatic Focus • Euro 5 Djdpfoznzbcjx Ab Dscl • Unladen Weight: 4,400 kg • Payload: 800 kg • Permissible Total Weight: 5,200 kg • German Vehicle • German Documents • Immediately Ready for Use • This offer is non-binding and without obligation. - Subject to prior sale. - Errors and/or typos not excluded. - Sale subject to our General Terms and Conditions.

Condition: used, mileage: 26,479 km, power: 177 kW (240.65 HP), first registration: 07/1994, overall weight: 13,500 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, Equipment: all wheel drive, parking heater, Construction/Refurbishment: * SO-vehicle LF16-12, * Manufacturer: Schlingmann, * 3 roller shutter doors on each side (left and right), * Lighting mast, * Auxiliary drive, * Front warning lights, * Rosenbauer pump with 224 operating hours, * 3 rotating beacons, * 2 towing eyes at the front, * Additional headlights, Equipment: * Spacious cab, * 4-door, * Engine brake, * 4x4 drive, * Longitudinal and transverse differential locks, * Off-road gear, * Flame start system, * Tires: 10 R 22.5 Other: * 1 previous owner, * Axle loads: Front axle 5,500 kg - Rear axle 9,200 kg, * Payload 4,920 kg according to ZLB, * Gross vehicle weight 13,500 kg Since 1972, we have been your reliable partner for everything related to cars and commercial vehicles in 28832 Achim, near the Bremer Kreuz. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer attractive financing options with favorable special conditions. If you are interested, we will be happy to prepare an individual offer for you! Trade-in of your commercial vehicle is possible. If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Dodpfjzywwwjx Ab Decl Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical errors and data transmission errors. Listed equipment may need to be verified separately. Subject to change and prior sale.

Condition: used, maximum load weight: 29,700 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2027, loading space length: 9,920 mm, loading space width: 2,460 mm, loading space height: 2,250 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,945 mm, Year of construction: 2025, Equipment: ABS, Wielton aluminum box body, 55 m³ load volume Combination door with two grain chutes Unladen weight approx. 6300 kg Demonstration vehicle – immediately available First registration 07/02/2025 Kingpin distance 1150 mm - BPW disc axles Ø430 - Axle lift on the first axle - Automatic tipping lowering system - SAF geared landing gear, full load - Aluminum air tanks - Braking system WABCO 2S/2M - Combination door with 2 grain chutes - Automatic 2-hook locking system + threaded screws - Double pendulum bearing and replaceable rubber seal - Floor plate 7 mm Endur aluminum HB 114 - Side wall profiles 350 x 40 mm, inner wall thickness 2.5 mm - Roller shutter with quick closure, silver color - Operating platform mounted on the chassis - Hydraulic cylinder BINOTTO up to 250 bar - 6 tires 385/65 R22.5 Bridgestone R179XM - Steel rims - Lighting system ASPÖCK - Full-LED rear lights - 2 reversing lights LED - Tool box and water tank - Aluminum ladder - Aluminum access ladder at the rear - Paintwork: frame RAL 7021 black-grey, body RAL 9006 silver Dodpfszyd Euox Ab Dscl Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or purchase contract are binding. You will receive the exact scope of equipment and prices from our sales staff. Please contact us.

Condition: used, Year of construction: 2023, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: L0098, table height: 1,000 mm, table width: 195 mm, total width: 1,500 mm, total length: 3,500 mm, total height: 2,150 mm, spindle speed (min.): 750 rpm, table length: 3,250 mm, spindle speed (max.): 6,000 rpm, number of spindles: 8, rotational speed (min.): 750 rpm, rotational speed (max.): 6,000 rpm, drill chuck size: 11 mm, workpiece weight (max.): 1,200 kg, operating pressure: 8 bar, air demand: 15 m³/h, KS Maschinenbau - KS LBM DB 04 DR For sale is a row drilling machine, also known as a strip drilling machine. The row drilling machine KS LBM DB 04 DR is designed for drilling strips and guide rails made of aluminum, plastic, and wood, as well as roller shutter end strips (for wood profiles up to 3 meters long and up to 90 mm in height). Dcjdpsywtxbefx Ab Dsl The machine is equipped with 4 pairs of three-phase drilling units. Four holes each can be drilled simultaneously or with a time delay from above and below. The spacing between the drilling units is manually adjusted using an indexing system for various distances. The index holes are fitted with drill bushings into which the hardened index pins are centered. The offered strip drilling machine comes with 8 drill heads (4 oriented downwards, 4 upwards). We have used this machine in our workshop to drill wooden fence profiles. It has provided us with reliable service over the past few years. As our customer is switching to plastic profiles, we no longer have use for it. This machine configuration includes 8 extraction adapters for chip extraction, along with hoses and a manifold for customer-side extraction. Further videos and technical data about this machine series can be found at the following link: ksschulten.com/en/products/drilling-machines/strip-drilling-mach ine-ks-lbm/video.html The machine's operating manual is of course still available.

Condition: used, functionality: fully functional, container length: 20 ft, 🏢 20-foot office container – versatile, robust, and immediately available 🚛 For sale: a 20-foot office container in stable and well-maintained condition. Ideal as a site office, storage unit, sales container, workshop, break room, or office – versatile and ready for immediate use. ✨ Features & Highlights ✅ 2 office windows on the front with tilt-and-turn fittings including roller shutters ✅ 1 steel exterior door on the front ✅ 2 light strips for optimal illumination ✅ 1 electric heater – ideal for year-round use ✅ Robust steel construction ✅ Weatherproof and durable ✅ Immediately available Djdpjwu Uuxofx Ab Dscl ✅ Standard dimensions: 20 feet (approx. 6m long - 2.50m wide - 2.80m high) 📸 Condition: The container is in used but well-maintained condition with typical signs of wear. The construction is stable and is perfectly suited for immediate use. 🚛 Transport: Transport can be arranged upon request or is the responsibility of the buyer. 📩 If you are interested or have any questions, please do not hesitate to contact us! Viewings are possible at any time by appointment.