Used Sidel Pet for sale (30)

Condition: used, Year of construction: 2000, COMPLETE BOTTLING LINE PET 18,500 BPH Product: PET Bottles Speed: 18,500 BPH (2 L bottles) PET Preform Tipper VE.CO. – Year 1997 Model: 30L917 PET Preform Orientator Sidel – Year 1999 Model: XMMC94 PET Blower Sidel – Year 1999 Model: SBO14 Number of molds: 14 Air recovery system Air Conveyors Lanfranchi – Year 2007 Monoblock Sidel-Simonazzi and Capper Arol Model: EUROSTAR RAA282 – Year 1985 Direction: Clockwise Rinser 50 grippers Manual carousel height adjustment Fixed nozzle 1 treatment with water Fillers 80 valves Filling type: Isobaric Valve type: Mechanical Valve functions: Degassing and sanitization Electric tank height adjustment Capper Arol 10T – Year 1998 Model: TS EURO/K10T.350O Manual head height adjustment Cap type handled: 3-START HEXALITE Cap dimensions: Ø 28.6 mm h: 10.5 mm Cap feeding system: Pick & Place Nitrogen Doser Terboven – Year 2008 Model: ISTE-CON 5 Cap Elevator P.Q.L. Mechanics – Year 2011 Model: 09B3 Type: Pneumatic Level and Cap Inspector Heuft (Spectrum) – Year 2013 Model: HBBVXTXXX Inspection type: Cameras Checks the fill level; cap presence; incorrectly screwed caps Complete with ejector Hfedowditnepfx Ag Non Labeller Krones – Year 1998 Model: CONTIROLL Direction: Clockwise Electric head height adjustment 15 plates with mechanical cam Number of stations: 1 Labeling type: Roll-fed Label types: WRAP-AROUND Label Presence Inspector Heuft (Reflexx) – Year 2023 Model: ONE Inspection type: Cameras Lumonics Laser Marker – Year 2009 Model: SL301 Bottle Conveyor Belts Procomac – Year 2000 Model: P 3233/1A Divider Procomac – Year 2000 Model: P3227 Shrink Wrapper Zambelli – Year 1999 Model: LFT3657 Version: Film launch Type: Film only Shrink Pack Conveyors Procomac – Year 2000 Model: P 3233/1A Batch Coder Markem – Year 2010 Model: 9040 Type: Inkjet Handle Applicator Comag – Year 1999 Model: H65/1 Bundle Divider L.M. – Year 2000 Model: 28809 Palletizer ACMI – Year 1999 Model: RASAR C/1350 Type: Pusher Double infeed Pallet magazine Interlayer System Pallet Wrapper Tosa-Acmi – Year 2012 Model: 120+475 Wrapping type: Rotating arm Top sheet dispenser Pre-stretch Pallet Printer Eidos – Year 2009 Model: 7P6NRSA General Information: Supported bottle dimensions: Ø min: 89 mm; Max Ø: 95 mm Height min: 145.90 mm; Max height: 344 mm

Condition: used, functionality: fully functional, The linear volumetric filler is flexible, precise and perfectly adapted to the filling of difficult and dense products, suitable for the filling requirements of this type of products in metal cans, glass jars, bags and more. Be it pâté, canned meat, raw or minced meat, spinach, etc. Whether thick or pasty, homogeneous or chunky. Many of your products are difficult to pack, and this filler is suitable for that. -Products: soups, porridges, sauces, curds, fresh cream, sausages, cakes, fruit pulps with fruit content, honey, mustard, liquid products, white cheese, rillettes... Hfedpswngcnjfx Ag Nen The concept of mechanical volumetric filling is simple. A product is introduced into the central hopper and dispensed into the package. A cam-controlled piston sets the filling volume. An operator controls the machine's output from a Siemens touch-screen console. Various parameters, including format height, capacity and output rate, are pre-programmed depending on the product to be filled. Output may vary depending on the product and format to be filled.

Condition: used, Year of construction: 2013, Overview  This complete filling line consists of the machines below. It was stopped in 2024 and is immediately available. Due to regular maintenance and several upgrades even the older machines of this line are in good technical condition and the supply of spare parts is secured.  Details  PET line up to 30,000 bph in 1.5 L. Neck 29/25 Line consisting of: Preform rinser Krones, 2016 Blower Sidel, 2002 Gangloff Scoma filling machine, 2013 Capper, 2013 Caps Sidel, 2013 Commissioner Heuft, 2001 CIP Sovotec, 2011 Pallet conveyor, 2013 Inspector Krones, 2013 Labeling machine Krones, 2006 Domino bottle coder, 2014 Shrink-wrapping machine Ocme, 2013 Twinpack handle applicator, 2012 Conveyors NTS, 1997/ overhauled 2012 Gebo bottle conveyor, 1997/ completely overhauled 2012 Accumulation table, 2013 Palletizer Ocme, 2014 Labeling machine for packs, 2011 Labeling machine for packs 2, 2011 Conveyor packages and divider SES, 2003 film Aetna, 2014 film Aetna, 2014 Packlift Ambaflex, 2013 Hfsdpfovuqtljx Ag Non

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Hfedpfjrazwrjx Ag Nen - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional Hfsdpfxjwa Rhrj Ag Njn

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel Hfjdpfswcggvsx Ag Nen • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: used, functionality: fully functional, Product: Still Water Speed: 18,000 l/h (2 L bottles, Ø 92) Formats: 0.5 L and 2 L Preform Tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling, and capping monoblock comprising: - SIDEL SBO 16 Series 2 Stretch Blow Molder • Year: 2002 • Type: Rotary • Number of molds: 16 (molds not included) • Complete set for Alaska neck processing included • Air recovery system • NO CHILLER - SIDEL ALSIM Filler • Year: 2002 • Rotation direction: Counterclockwise • Number of filling valves: 63 • Filling method: Gravity • Valve type: Mechanical • Pressurized cabin with filters - AROL Capper • Number of heads: 12 • For pre-threaded plastic caps: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (technical drawing available) • Cap distribution system: Pick & Place MONOBLOCK FULLY OVERHAULED IN LATE 2024 Cap Elevator: - Manufacturer: AROL - Year: 2002 - Type: Mechanical Labeller: - Manufacturer: KRONES - Model: CONTIROLL - Year: 2012 - Type: Rotary labeller - Rotation direction: Counterclockwise (parallel infeed and outfeed) - Electric head adjustment - Number of plates: 16 - Mechanical plate movement via belt - Number of stations: 1 - Label application type: Roll-fed - Number of labels applied: 1 - Applicable label types: Wrap-around plastic from reel - Label presence inspection Laser Coder: - Manufacturer: Videojet - Model: 3210 - Year: 2024 - NO FUME EXTRACTION SYSTEM Shrink Wrapper: - Manufacturer: SMI - Model: SK452 F - Year: 2005 Hodpfowzbppsx Ag Nefn - Version: Film launch - Type: Film only - Double lane - Current formats: • 2 L: 3x2 double lane • 0.5 L: 4x3 double lane • 0.5 L: 6x4 single lane Handle Applicator: - Manufacturer: TWINPACK - Model: MHTE - Year: 2000 - Double lane Palletizer: - Manufacturer: ACMI - Model: PASAR P130 2L - Year: 2000 - Type: Layer palletizer - Pallet magazine - Slip sheet insertion unit - Dual infeed Pallet Wrapper: - Manufacturer: TOSA - Model: 125 + 475 - Year: 2002 - Wrapping type: Rotating ring - Equipped with top sheet dispenser - Pre-stretch capability

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Hodpfx Agjtr R Tks Nsfn

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Hfjdpfxoutni Re Ag Nsn Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: excellent (used), Year of construction: 2012, Used Bottling Line | Used Beverage Line | Soft Drinks NP 632 | PET BOTTLING LINE 4,200 BPH Year: 2012 Speed: 4,200 bph Blow molding machine Sidel SBO3 Compat 3 cavities Neck: 38mm Air belts Hedpfstzlk Uex Ag Njfn Gallardo Triblocco 12.18.4 Rinser 12 clamps Filling machine 18 valves Capper 4 heads Neck: 38mm Emebe Bottle Handler Makro | Nordson hot glue labeler Emebe bottle dispenser KHS Bundler Project handle applicator

Condition: used, Year of construction: 2018, The Sidel FM 100 is a filling line specifically designed for still water, offering automated solutions for high-efficiency bottling. Here are some key features and benefits: - Flexibility: The FM 100 can handle various bottle sizes and shapes, making it adaptable for different products and market needs. - Efficiency: The filling technology minimizes product waste and ensures a consistent fill volume, which is essential for quality control. - Automated Processes: The line incorporates automated processes for bottle handling, rinsing, filling, capping, and labeling, resulting in a streamlined production line and reduced labor costs. - Sanitization: The FM 100 is designed with hygiene in mind, featuring materials and designs that facilitate cleaning and sanitization, which is critical for food and beverage applications. - Speed: The line is capable of handling high throughput, allowing for efficient production schedules that can meet increasing market demands. Hfodpfx Aexnx Dnog Njn - Energy Efficiency: The equipment is built with energy-saving technologies that reduce overall production costs while maintaining performance. - User-Friendly Interface: Operators benefit from an intuitive control system that simplifies monitoring and adjustments during operation. Choosing a used Sidel line for still water filling can offer several advantages: - Cost Efficiency: A used Sidel line is typically more affordable than new equipment, resulting in significant savings for your production setup. - Proven Technology: Sidel is a well-known brand in the beverage packaging industry, recognized for their reliability and advanced technology. A used line still maintains the quality and efficiency of Sidel's systems. - Quick Implementation: Purchasing a used line can expedite your acquisition process, allowing you to start production sooner compared to waiting for a new system to be manufactured and installed. - Lower Depreciation: Since the equipment is already used, it has already undergone significant depreciation, which means you might recover your investment more quickly. - Availability of Parts and Support: Sidel has an extensive service network and parts supply, making it easier to maintain and service used equipment. - Flexibility: A used line can often be customized or upgraded to meet your specific production needs, providing flexibility in your operations. - Sustainability: Opting for used machinery can be seen as a more sustainable choice, as it extends the lifespan of existing equipment rather than contributing to the production of new units. - Established Performance: With a used line, you have available performance data and history, allowing you to make informed decisions about reliability and efficiency based on real-world usage. Filling Machine: Sidel SF 100 FM Cap Size: 28 mm Filling volumes: 500 ml - 1 Litre and 1,5 Litres Blow moulder Type: Sidel Blow moulder model: Matrix Moulds: 500-1000-1500 ml round Bottles Pre forms Hopper Feeder Make : Sameto Pre Forms Feeder Type: EBHIS 205 Cap Feeder: Tetra Pak / Gebo Cermex Cap Feeder Serial Number : 67FR3927CF01 Labeller Make: Sidel Labeller Model: ROLLQUATTRO Labeller Serial Number: SLSEAD404811 Conveyors Make: Tetra Pak / Gebo Cermex Shrink Wrapper Make: Sidel Shrink Wrapper Model: Versa Film Access Handle Appicator Make: Kartville Palletiser Make: Tetra Pak Gebo Cermex Palletiser Serial Number: GIBP1055 Palletiser Model: KOMBI Robot Stacker: ROBOPAC Robot Stacker Model: HELIX 3 E

Condition: used, Year of construction: 1992, Used Blow Molding Machine Sidel 1992 Hjdovgunwepfx Ag Njfn Manufacturer: SIDEL Model: SBO2 Year: 1992 Speed (b / h): 3000 Processed formats: 0.25ml – 2 liter Accident prevention protections: Yes Manuals available: Yes Revisions available: Yes Operating status: In production Number of cavities: 2 Preform neck type: Preform 1881 weight: 9000kg Quick format change: Yes Preform loader: Yes Preform orientator: Yes Compressor: No Chiller: No Air recovery system: No PLC type: Mitsubishi Spare parts available: Yes Hours worked: 2000 Consumption: Volt:360 Kw:40 Hz:100 Notes: Machine working stabile suitable to be connect with filler machine. The machine has been completely updated, hmi electronics and new plc.

Condition: used, Year of construction: 2002, Overview  This stretch blow moulding machine was manufactured in 2002 by France-based SIDEL. It is suitable for producing PET bottles in various formats and is immediately available for sale. The machine includes a preform tipper, container, and feed system. Technical data Capacity: 24,000 b/h Formats: 0.25 l, 0.5 l, 1.0 l, 1.5 l PET bottles Neck finish: 28 mm PCO Voltage: 400 V Frequency: 50–60 Hz Scope of Delivery  Sidel SBO 20 Series 2 blow moulder Preform tipper Container system Preform feed system Hfjdjwiiy Ejpfx Ag Non

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Hjdpfjg Ailcex Ag Nefn Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2007, This is a Sidel SBO 4 blow moulder, it’s designed to receive preforms of 38 mm neck size caps and blow mould the bottles . The speed of the machine is at 6,000 bottles per hour on 2 litre round bottles . The year of manufacture is 2007 and the condition is very good. The is delivered with the pre forms hopper and elevator. Capacity: 6000 b/h Volumes: 250-500-1000-2000 ml Neck Size of preforms: 38 mm Format: Round bottles Hfedpfjw S Iciex Ag Non Air consumption: 11 bar Controls: SIEMENS SIMATIC MULTI TOUCH PANNEL Available: Immediately

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Hfjdpfxsvgu D So Ag Njn Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2006, Overview  The new glass pusher “SWEEP-OFF B” was built by Sidel/ Simonazzi in 2006. It is still in operation and can be inspected in person at any time. The machine has only a few operating hours.   Technical details  Capacity: 48,000 bph on 0.5l bottle  Maximum pallet height: 2,000 mm  Pallet dimensions: 1,000 mm x 1,200 mm  Scope of delivery    Incl. protective fencing according to layout  Incl. pallet transport  Incl. empty pallet magazine  Incl. magazine for slip-on lids, intermediate layers  Incl. push-off table  Incl. technical documentation   Incl. program backup  Hfsdpfx Agsugyczj Nen

Condition: used, Year of construction: 2003, operating hours: 19,500 h, Used Blow Molding Machine Sidel SBO 2003 We have a Used Blow Molding Machine available for purchase, the Sidel SBO 2003, with the reference. The machine was manufactured by Sidel in 2003 and has a model of SBO 12. It has a speed of 17000 BPH and is suitable for creating PET containers. Hsdpovr S Tnefx Ag Nsfn This particular machine has 12 cavities and comes equipped with a preform loader, preform tipper, and preform unscrambler. It also has an air recovery system and is a rotary type. The preform neck types it supports are 1881 and 2925 neck. The machine is currently in a ready state for operation and has safety features installed. It also comes with manuals and has been in operation for 19500 machine hours. If you’re interested in purchasing this machine, please let us know.

Condition: used, Year of construction: 2001, Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270 Hsdpfx Agol Hx Ecj Nsfn

Condition: used, Year of construction: 2002, operating hours: 45,000 h, Used blow molding machine Sidel SBO 12 Series 2 The Sidel SBO 12 Series 2 represents a culmination of this evolution, boasting advanced features and capabilities. Over time, blow molding machines have become indispensable in modern manufacturing. Hedpfx Agjvgvtze Nefn Reliable Performance and Durability of the Used blow molding Sidel SBO 12 Series 2 Moreover, the blow molding machine stands out for its exceptional performance and durability. With a modest operational lifespan of 45,000 hours, it has proven to be a reliable workhorse in the production line. Its robust construction and precise engineering ensure consistent quality and productivity, making it a valuable asset for manufacturing operations. Comprehensive Maintenance Support for Used blow molding Sidel SBO 12 Series 2 In addition, maintenance and servicing are crucial aspects of ensuring the longevity and performance of blow molding machines. Sidel, a leading manufacturer in the industry, offers comprehensive support services for its equipment. Detailed documentation of maintenance and overhauls by Sidel technicians provides transparency and reassurance to potential buyers, highlighting the machine’s well-maintained condition. Meticulous Disassembly and Storage Furthermore, transporting and storing blow molding machines require meticulous planning and execution. Specialized technicians have carefully disassembled the blow molding machine, following strict safety protocols. Proper storage conditions have been established to safeguard the equipment during transit, minimizing the risk of damage and ensuring its integrity upon arrival at the destination. Streamlined Reinstallation Process The Sidel stretch blow molder equipment, previously used in soft drink production, has been disconnected with precision. This ensures a streamlined reinstallation process, minimizing downtime and maximizing efficiency in the production line. Proactive Maintenance Checks Moreover, before reintegrating consumable parts into production, a proactive maintenance check is recommended. This preventive measure helps identify any potential issues and ensures optimal performance once the machine is back in operation. By addressing any maintenance needs upfront, manufacturers can avoid costly disruptions to their production schedules. Enhanced Functionality with Supplementary Equipment Furthermore, in addition to the blow molding machine itself, supplementary equipment enhances the overall functionality of the production line. Preform loaders and orientation systems are included, optimizing efficiency and throughput. Optional add-ons, such as compressors and chillers, can be provided to meet specific production requirements, further enhancing the capabilities of the equipment. Focus on Energy Efficiency Additionally, energy efficiency is a key consideration in modern manufacturing, and this blow molding machine incorporates innovative features to address this concern.

Condition: used, Year of construction: 1999, Overview This SIDEL blow moulder and KHS filling monobloc were both manufactured in 1999. They are still in production until the end of October and can be viewed in person. The special feature of the filler is that it can process carbonated or still mineral water with natural flavors using a micro-dosing unit. The filler (KHS Innofill monobloc) and accumulation table (Sidel AQ) are also available without the blow molder (Sidel SBO 18 Series 2), price on request.  Technical Details Blow moulder | SIDEL | SBO 18 Series 2 | 1999 Current capacity: 23.400 bph in 1.25L Working hours: 40.000            Number of moulds: 18      Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:            Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control Lanfranchi bottles buffer storage silo            Unscrambler and air conveyor system with drive to the entry KHS monobloc Supplied with all format & spare parts available Rinser, Isobarometric Filler, Capper Monobloc | KHS, Zalkin | VK-E 40/50/10/S PET | 1999 (low working hours) Filling carbonated mineral water and also carbonated mineral water with natural flavours Processing: PET bottles 1,25L & 0.50L cylindrical petaloid base Bottle neck: PCO28 1881 Current capacity: 23.400 bph Number of rinsing nozzles (KHS Innoclean): 40 Number of filling valves (KHS Innofill): 50 Number of capping stations (Zalkin): 16 Including also micro-dosing unit Perrier for natural flavours With caps magazine & elevator Accumulation table Gebo Sidel type AQ file Dynamic accumulation and buffer between the filler outlet and the labeller inlet, avoids untimely stops upstream (filler, blow-moulder) due to the labeller Hodpforqar Sex Ag Nofn

Condition: used, Year of construction: 2005, Used Blow Moulding Machine Sidel SBO6 2 Year 2005 – 9000 bph The machinery has been disconnected from the functioning production. The PLC is present, and its functionality is ensured. The machinery as a whole is in a good state of maintenance, pre-production maintenance is still recommended because the blow molding machine has been in storage for about 12 months. Transport is a large load, therefore outside the normal gauge. Hfjdpfxsvguxvs Ag Nen We can supply all necessary spare parts for this blow molding machine.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Hsdpfx Asrkgy Uog Nefn

Condition: used, Year of construction: 1999, operating hours: 42,100 h, Used SIDEL ROLLQUATTRO F45 Labeling Machine up to 20000 bph Introduction of the Used SIDEL ROLLQUATTRO F45 In the dynamic realm of beverage manufacturing, ensuring accuracy and efficiency in labeling processes is paramount. This is exemplified by the comprehensive work performed by the used SIDEL ROLLQUATTRO F45 labeling machine,renowned for its capacity to handle up to 20000 bottles per hour (bph), which stands as a testament to cutting-edge labeling technology. Technical Specifications Introduced by Sidel in 1999, the SIDEL ROLLQUATTRO F45 is specifically engineered for PET containers. Its versatility shines through, as it can accommodate bottle sizes ranging from 0.33 L to 1.20 L, ensuring adaptability across various product lines. Operational Details Hfodpfx Agsvgvwyj Non Powered by 36 meticulously designed plates and mechanical cams, the machine guarantees precise label positioning with each cycle. Moreover, its counterclockwise rotation mechanism enhances operational efficiency and minimizes downtime. Thereby maximizing throughput. Labeling Method Utilizing the roll feed-coil method, the SIDEL ROLLQUATTRO F45 ensures seamless label application. Furthermore, the integration of automatic label adjustment and electric head adjustment functionalities facilitates swift setup and calibration, further optimizing production efficiency. Current Conditions and Safety With an impressive operational history spanning 42100 hours, this machine continues to demonstrate its reliability and durability. Equipped with a comprehensive array of safety features, including fail-safes and emergency stops, it ensures a secure working environment for operators. Conclusion of the Used SIDEL ROLLQUATTRO F45 In conclusion, the used SIDEL ROLLQUATTRO F45 labeling machine emerges as a stalwart solution for beverage production facilities seeking unparalleled performance and precision. With its robust construction, advanced features, and impressive throughput capacity of 20000 bph, it remains a cornerstone of efficiency in the labeling process. Whether for small-scale operations or large-scale manufacturing facilities, the SIDEL ROLLQUATTRO F45 stands as a testament to Sidel’s commitment to innovation and excellence in beverage packaging technology.

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Hfsdpfx Asnpbhveg Nen