Used Sigma for sale (32)

Year of construction: 1999, condition: not inspected (used), Sigma plate heat exchanger for milk processing Bedpfxoh D Hkpo Al Iewl

Condition: used, Year of construction: 1997, SIGMA MISSION 1 Machining Center FANUC O – M CNC Fully functional and in excellent condition Connected and ready for operation Table size: 750 mm x 400 mm T-slots – number, width, pitch: 3 x 18 x 125 mm Travel: X: 600 mm Y: 400 mm Bodpfx Ajxcgyyjl Iswl Z: 450 mm Spindle taper: ISO 40 Spindle speed: 6,000 rpm Tool magazine: 16 positions Supplied with various toolholders/tools Includes 2 machine vises Weight: 4,500 kg Year: 1997, complete with full documentation

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €130,000!!! This price is valid only until March 21, 2026! Don’t miss your chance! We invite you to purchase a BRAND NEW, EXCEPTIONAL 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. The presented machining center is suited for processing: - Wood - Wood-based materials - Aluminum - Plastics - Composites - Materials of similar hardness (CORIAN, DIBOND, MDF, HPL, HIMAX, etc.) The offered model is the latest SIGMA, which comes in a high-specification configuration. The machine is absolutely new, and the attached specification provides a detailed overview of its features, parameters, and production capabilities. FANUM products are widely recognized for their reliability, precision, strong performance, and operating speed. The MACHINING CENTER we offer is COMPLETELY NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered directly to our facility by the manufacturer. The FANUM Sp. z o.o. service team performed commissioning only; the machine has not been operated and is essentially in factory-new condition. Our model comes exceptionally well equipped, offering practically every feature you may require. Currently, a new unit of this type retails for approximately €282,350 net (PLN 1,200,000 net). We have direct contact and support from FANUM Sp. z o.o. Another start-up inspection and demonstration can be arranged at our site. We can also arrange transport to the new owner and have the machine installed and commissioned at the destination site. The listed price refers to the machine itself; installation and commissioning at the destination can also be included in a separate quotation. We believe the discount we offer—over 40% (over €117,640 net, approximately PLN 500,000 net) off the new machine price—makes this an extremely attractive deal for anyone seeking such equipment or for buyers who didn’t anticipate that their budget would allow them to acquire a brand-new, modern, high-efficiency machining center. General notes regarding the sales offer: • Although the machine is NEW, it was manufactured in 2021, and we do not offer any guarantee or warranty; • The machine is non-returnable; • The advertised price is exclusive of VAT (23% applies to Polish buyers); VAT will be added to the invoice—please consult the advert for pricing details; • Single owner. * Price in EUR calculated according to NBP exchange rate: 1 EUR = 4.25 PLN. Bodpfoyn Ri Rsx Al Iewl Welcome to all users of the MACHINESEEKER platform. We are new MACHINESEEKER users. We are not a furniture, production, or machinery trading company. We own numerous real estate assets in Poland and are a developer of houses and apartments in Warsaw, the capital city. All machines offered are our property. We obtained them as settlements with our tenants from the furniture industry. We know both their history and condition, consistent with our descriptions. We remain in touch with machine manufacturers (Homag, Otto Martin, OMC Machinery, FANUM) who can provide additional assistance. As we do not require these machines, our pricing is highly attractive—especially since the equipment is virtually unused. We can assist with transportation anywhere in Poland or the EU. Inspections of the machines before purchase are welcome. Best regards.

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR Bwodpfxsxlg Uco Al Isl - Year of manufacture: 2004 - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel paths: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle cooling 30 bar - Extraction system - Tool measurement Renishaw prepared - Magazine with 50 positions Purchase price in 2004: EUR 230,000.00 Defects: - Main spindle motor failure (electrical – likely winding burnt out) - Power supply unit for control system UV 101B defective - LT module 2x50A defective Net price without dismantling and unloaded, ex works Luckenwalde (Germany), without transport

Condition: used, Year of construction: 1995, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: FANUC, controller model: 0 - M, workpiece weight (max.): 700 kg, spindle nose: ISO 40, CNC: FANUC 0-M TABLE Usable surface: mm 900 × 400 T-slots (number – width – pitch): 3 × mm 18 × mm 125 Max load on table: kg 700 AXIS TRAVELS X-axis longitudinal travel: mm 750 Y-axis transverse travel: mm 400 Z-axis vertical travel: mm 450 Spindle nose–table distance (min/max): mm 160 / 610 SPINDLE Tool taper: N40 DIN 69871-A Speed range: rpm 40–4,000 Constant power speed: rpm 750 Max torque: Nm 47 TOOL MAGAZINE Number of tool positions: 16 Tool selection: RANDOM, fixed position Automatic tool change: direct from spindle to magazine Tool holder taper: N40 DIN 69871-A Bodpoygm Rbefx Al Ijwl TOOL DATA Tool shank: DIN 69872-A Max diameter of adjacent tools: mm 75 Max tool length: mm 240 Max tool weight: kg 6 Tool change time: approx. 5.5 s Chip-to-chip time: approx. 8 s FEED RATES Working feed (X, Y, Z): mm/min 0–10,000 Rapid traverse: mm/min 20,000 GENERAL CHARACTERISTICS Machine weight: approx. kg 4,250 Overall dimensions: mm 2,320 × 2,880 Total installed power: kW 12 Power supply: V 380 Year of manufacture: 1995 MACHINE SUPPLIED COMPLETE WITH: • Operation and maintenance manuals and CE declaration

Year of construction: 2009, condition: excellent (used), The centrifuge of the brand Sigma type 1-15 PK is ideal for separating solutions and suspensions of different densities in sample tubes. Technical specifications Voltage: 230 V, 50-60 Hz Bwodpfxspa N R Te Al Iel Power: 630 W Speed: 14000 rpm External dimensions (W) x (D) x (H): 35 x 55 x 35 cm Rotor 24 x 1,5/2 ml

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) Bwjdpfx Aljyc H Irs Ijl • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: • CNC machines • Injection molding machines, extruders • Production lines • Process cooling • Plastics, metal, chemical industries