Used Sigma for sale (27)

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Predpfx Ahsxhfpdo Asc Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand HEIDENHAIN This 3-axis Sigma Leader 6 vertical machining center was manufactured in 2007. It features extensive travel capabilities with X-axis at 1250 mm, Y-axis at 810 mm, and Z-axis at 630 mm. Rapid traverse rates reach up to 50 m/min, and it includes a high-capacity tool magazine with 40 positions. If you are looking to get high-quality milling capabilities, consider the Sigma Leader 6 machine we have for sale. Contact us for more information about this machine. Predpfxoxnd Rto Ah Aec Application Types Milling

Condition: ready for operation (used), Sigma Zenit 3 machining center Manufacturer: Sigma Type: Zenit 3 Condition: good, ready for operation Power-on hours: 8600h Spindle hours: 1800h Spindle speed: 12,000 Spindle taper: SK40 X-travel: 1000mm Y-travel: 500mm Z-travel: 550mm Predpfx Aexnpi Ijh Aec Tool stations: 50 Chip conveyor Oil mist extraction Through spindle coolant (IKZ) With 4th axis Nikken

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Psdjidchcspfx Ah Ajrc material thickness: approx. 2,00 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 15 m/min, overall weight: 8,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 21, Equipment: CE marking, chip conveyor, documentation/manual, SIGMA VERTICAL MACHINING CENTER MODEL MISSION 5 X-AXIS STROKE 1250 Y-AXIS STROKE 600 Z-AXIS STROKE 685 TOOL CHANGE 21 PLACES ISO 40 SPINDLE SPINDLE ROTATION SPEED 12,000 RPM CHIP CONVEYOR HIGH PRESSURE THROUGH SPINDLE FANUC 18 M CNC FANUC MOTORS AND DRIVES COMPLETE WITH MANUALS Prodpfx Aewq Snzoh Aoc

Year of construction: 1999, condition: not inspected (used), Sigma plate heat exchanger for milk processing Prodpeh D Hkpsfx Ah Ajc

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Prodpfxexhffre Ah Aec Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: ready for operation (used), Year of construction: 2002, Detailed information X-travel 850 mm Y-travel 480 mm Z-travel 580 mm Rotary table (4th axis) No Control CNC Fanuc Series 18 Predpevt Ak Tefx Ah Aoc Table length 1000 mm Table width 540 mm

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR - Year of manufacture: 2004 Prsdpfx Asxlg Ucoh Aoc - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel distances: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle coolant: 30 bar - Extraction unit - Renishaw tool measurement prepared - Magazine with 50 slots Original purchase price in 2004: EUR 230,000.00 Defects: - Motor spindle electrical fault (probably winding burnt out) - Control supply unit UV 101B (repair cost approx. EUR 600.00) Net price without dismantling and unloaded, ex location Luckenwalde (Germany), without transport

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used Material color: sendzimir galvanized profile length: approx. 1.750 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,950 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Prodpfx Ahehvz D Hj Asc (without unloading)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,872 h, Control Unit Brand HEIDENHAIN Model TNC 426 PB Main Drive Number of axis 3 Movement X-Axis Movement 1000 mm Y-Axis Movement 550 mm Z-Axis Movement 685 mm Media Chip conveyor Yes Additional Equipment Chip conveyor This 3-axis Sigma Zenit 3 was manufactured in 2001 and features a Heidenhain TNC 426 PB control. It offers travel paths of X=1000 mm, Y=550 mm, and Z=685 mm, and includes a chip conveyor. If you are looking to get high-quality milling capabilities consider the Sigma Zenit 3 machine we have for sale. Contact us for more information. Pjdpfx Ahsw S N Hcs Ajrc Application Types Milling

Condition: new, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 48 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 40 kVA, rotational speed (max.): 15,000 rpm, overall weight: 7,200 kg, Equipment: documentation/manual, SIGMA Mission SMV-1050 Vertical Machining Center - Travels: X 1,050 mm | Y 560 mm | Z 510 mm - Table: 1,250 × 560 mm | Maximum table load 1,000 kg - Spindle: BT-40, power 11 kW (S1) / 15 kW (S6) - Spindle speed: up to 8,000 rpm - Working feed rates: 1 – 8,000 mm/min - Rapid traverse rates: 22 / 22 / 16 m/min Pjdpfx Ahoxgqdqo Aorc - Automatic Tool Changer (ATC): 24 tools, swing arm - Machine weight: approximately 4,800 kg - Overall dimensions: 2,950 × 2,450 × 2,850 mm (approximate) - CNC control: (according to standard configuration or customer's request) ✅ Designed for workshops needing versatility, precision, and robustness in a compact footprint. ✅ Fully equipped: cooling systems, chip protection, automatic lubrication, and CE-compliant safety design.

Condition: ready for operation (used), Condition Used Stock Number 9B 9B This listing is for the Sigma Aldrich 2mag Mix1 Stirrer The unit is in full working condition and is ready for immediate use Sigma Aldrich 2mag Mix1 Stirrer Stirring Volume: Up to 10,000 mL Speed Range: 100–2,000 rpm (extremely wide range) Design: Ultra-flat, wear-free magnetic stirrer with 1 large stirring position Drive System: 100% maintenance-free and wear-free, based on inductive 2mag-Magnetic-Drive concept Stirring Characteristics: Jerk-free stirring, even at low speeds Suitable for viscous media Prjdpfx Aewk R E Soh Ajc 4-step power settings: High power for large/viscous volumes Reduced power for warming-free continuous operation Soft-Start setting: ensures reliable, jerk-free centering of stirring bar Display: Clear digital interface for speed and status

Year of construction: 2009, condition: excellent (used), The centrifuge of the brand Sigma type 1-15 PK is ideal for separating solutions and suspensions of different densities in sample tubes. Technical specifications Voltage: 230 V, 50-60 Hz Power: 630 W Speed: 14000 rpm External dimensions (W) x (D) x (H): 35 x 55 x 35 cm Rotor 24 x 1,5/2 ml Prodpspa N R Tjfx Ah Aec

Condition: good (used), Year of construction: 2015, LIFT SIGMA - C-HOOK Prodpfx Aowrzn Hsh Asc MACH-ID 7820 Manufacturer: LIFT SIGMA Type: C-HOOK Year of construction: 2015 Length: 4200mm Width: 1900mm Height: 600mm Weight: 8200kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Prodpfxohwduxe Ah Asc Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.650 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 7,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Sigma, Vexta Stepping Motor Stepper motor -Type 20-3437D200-F075 Predpfx Aoqvp Ngoh Ajc -Shaft: Ø 10 x 30 mm -Dimension: 130/90/H90 mm -Weight: 2.4 kg

Condition: used, Year of construction: 1996, working width: 530 mm working height: 250 mm cutter head: tersa number of blades: 4 height adjustment: electrically read out workpiece thickness: digital feed speed: 2 speeds infeed roller: steel outfeed roller: steel table roller: yes motor power: 5,5 kW suction connection: 140mm machine length: 1200 mm machine width: 1400 mm weight: ca. 900kg Prsdsiqg N Espfx Ah Aec

Condition: used, Year of construction: 1997, SIGMA MISSION 1 Machining Center Pedpfxexcgyyo Ah Aorc FANUC O – M CNC Fully functional and in excellent condition Connected and ready for operation Table size: 750 mm x 400 mm T-slots – number, width, pitch: 3 x 18 x 125 mm Travel: X: 600 mm Y: 400 mm Z: 450 mm Spindle taper: ISO 40 Spindle speed: 6,000 rpm Tool magazine: 16 positions Supplied with various toolholders/tools Includes 2 machine vises Weight: 4,500 kg Year: 1997, complete with full documentation

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: EK 70282, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, feed length X-axis: 10,000 mm, feed length Y-axis: 10,000 mm, feed length Z-axis: 10,000 mm, total height: 3,266 mm, total length: 5,300 mm, total width: 5,000 mm, overall weight: 12,800 kg, spindle speed (min.): 6,000 rpm, input voltage: 400 V, power: 36 kW (48.95 HP), Used Ekkon Sigma EK 110/50 – Model year 1999 – for sale For sale: Ekkon Sigma EK 110/50, model year 1999. The machine has been regularly maintained, and a defective circuit board has recently been replaced. It is fully functional and can be seen in operation. Technical specifications: Control system: Heidenhain TNC 426 PB Pedpfsvy S Nfox Ah Ajrc Tool changer: 41 tools Extra table: Enables preparation of the next workpiece during machining Important conditions: The buyer is responsible for dismantling and transport. No warranty or liability for damage that may occur during transport. If you are interested or for more information, please contact me.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Sigma 4-16KS Refrigerated Centrifuge (2020) – Excellent Condition Manufactured in 2020, briefly used in a GMP environment and in perfect working order. Included Accessories: • Swing-out rotor 11660 • Bucket 13450 • 4x Round Adapter For 26 X 1.5/2.0 mL Reaction Tubes (17653) • 4x Round Adapter For 500 mL Conical Bottle (17682) • 2x Adapter for 12 x 15 ml conical culture tubes (17659) • Mobile centrifuge table for easy transportation Key features: • Max speed: 15,000 rpm • Temperature control from -20°C to +40°C with "Rapid Temp" pre-cooling feature; rotor cooling possible even at standstill. • Pre-cooling function ("Rapid Temp") • Rotor cooling at standstill • Max RCF: 5,526 × g (swing-out rotor), up to 25,155 × g (fixed-angle rotor possible) • Accommodates up to 4 x 750 ml in a swing-out rotor, ideal for high-volume workloads. Pedpfx Ahswlpydo Aerc With Spincontrol S interface, automatic rotor identification, imbalance detection, motorized lid lock, and zero-maintenance induction motor for consistent and safe operation. Stores up to 60 programs with user-defined names for rapid and repeatable processing. This unit meets EC compliance. 220-240V, 50 Hz Ideal for versatile laboratory applications requiring precise temperature control and high centrifugation speeds. Located in Switzerland, please inquire for shipping quotation.

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Prsdpfoidchgjx Ah Ajc Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.600 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm

Condition: used, Transport pickups, crane pickups -Spare part: from a machining center manufactured by Sigma type Mission 5 -Take: Ø 140 mm Prjdecnf E Ujpfx Ah Aoc -Rezes recording: mm -Pitch circle: mm -Number: 4 pieces available -Price: complete -Dimensions: -Weight: 23 kg

Condition: good (used), Technical data of the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 4.450 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Pedpfxjidcg Ae Ah Ajrc material thickness: approx. 2,00 mm

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x CS Sigma profile, used material color: sendzimir galvanized profile length: approx. 1.400 mm CS Sigma: approx. 200 x 65 x 18 mm material thickness: approx. 1,50 mm weight / pcs.: approx. 6,500 Kg Remark: The pictured angles are not part of the offer. General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item Prodohwdu Hepfx Ah Aoc or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)