Used Skoda 380 for sale (37)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. It features one turbine with a power input of 7.5 kW. Knodpfx Acjz Dfuvohob The machine is in excellent condition, fully functional, and can be tested in operation.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Knodexwqk Ejpfx Achjb Diameter over the bed: 1250 mm Diameter over the carriage: 900 mm Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Kodpsz Dv Nqjfx Achonb Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1986, Swing diameter: 1,320 mm Turning length: 5,000 mm Faceplate diameter: 1,250 mm Workpiece weight: 14 t Swing diameter over support: 900 - 950 mm Kedpfxsz Dv H No Achenb Total power requirement: 45 kW Machine weight approx.: 18 t

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Kodpjz Dv Imsfx Achsnb Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: used, functionality: fully functional, We are selling this machine. It is connected and can be tested. A video of the machine can be sent via the WhatsApp application. Documentation for the machine is available. Speeds: 1st range: 0.35-3.5 rpm 2nd range: 1.4-14 rpm Drive: 2 regulating motors, each with 120 kW, powered by a 240 kW Ward-Leonard converter. Diameter of the clamping plate: 8,000 mm Largest turning diameter: 12,500 mm Knodpfsydqfdsx Achjb Turning height: 2,200 mm The machine underwent a major overhaul and modernization in 1991. Maximum workpiece weight: 200,000 kg Machine weight: 550,000 kg Please submit your offer.

Condition: ready for operation (used), Equipment: documentation/manual, We offer a Škoda blasting cabinet. The equipment is fully functional and has been in operation. It can be tested on-site. Internal working space dimensions: 2900×2900×2900 mm. The cabinet features a floor-based abrasive collection system, abrasive transport to an abrasive cleaner, a Clemco 200 l blasting unit, and a filtration unit. Kedozrmqdjpfx Achjnb Complete set of equipment.

Condition: excellent (used), Year of construction: 1977, functionality: fully functional, We are selling this lathe, already dismantled and stored in the warehouse. Fully functional; a video of the machine can be sent via WhatsApp. Swing over bed: 1080 mm Swing over support: 720 mm Distance between centers: 9000 mm Minimum turning diameter: 20 mm Spindle speed: 1.8 – 355 rpm Main drive power: 40 kW Workpiece weight: 10 t Ksdpfx Ajy I Ifwschonb

Condition: used, Floor plate area: 4000 x 4000 mm Knedpoz Ahausfx Achsb E20 table: 2000 x 2000 mm Load capacity: 20 tons Travel: X=4000, Z=2500, Y=1600 mm Weight: 75 tons

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, I am selling this machine. A video of the machine can be sent via WhatsApp. It can be tested while connected. Very good condition. X 11,500, Y 3,150, Z 2,000, clamping M 100 Includes a support column, 6 pieces of boards with dimensions 6,500 x 1,850 x 400 mm. Rotary table E 20. Heads, etc. This is a complete workstation. Knsdsxwl Tbepfx Acheb Weight approximately 200,000 kg.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Kjdpfx Acexwmbmohenb

Condition: used, mileage: 162,702 km, power: 135 kW (183.55 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2020, Equipment: ABS, Empty weight: 1.583 kg Knsdpfx Ajzgticjchsb Carrying capacity: 514 kg GVW: 2.097 kg Please contact Emal Jaweed for more information

Condition: good (used), Year of construction: 1968, functionality: fully functional, Plate diameter …. 8000 mm Max. turning diameter 12,500 mm Machining height 4,000 mm Maximum workpiece weight on the plate 120,000 kg. Kjdpfjzx Hctjx Achjnb Approximate weight 556,000 kg.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, For sale: this lathe. Swing diameter over bed: 1,000 mm. Turning length: 4,000 mm. Sinumerik 840D control. Kedpfxsxzr Rbj Achonb

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, We are selling this lathe. Accessories included: steady rest, additional milling attachment. Turning length: 8000 mm Diameter over bed: Ø 2020 mm Diameter over cross slide: Ø 1600 mm Spindle bore: 120 mm Spindle speed/ranges: 180 rpm Spindle power: 80 kW Tailstock spindle: Ø 400 Spindle travel: 250 mm Dimensions: Length: 15360 mm Width: 3520 mm Height: 2600 mm Weight: 78000 kg Knsdpfxjx Auwgs Achsb The machine is located in the area of the former Vítkovice Foundry in Ostrava, Czech Republic. The machine is connected and can be tested. We can send a video of the machine via WhatsApp.

Condition: used, mileage: 27,287 km, power: 110 kW (149.56 HP), first registration: 07/2023, fuel type: gasoline, overall weight: 1,780 kg, axle configuration: 2 axles, fuel: regular/benzine 91, color: black, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 5, total width: 1,793 mm, total height: 1,531 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, 7L6 Start/Stop system, 8T7 Adaptive cruise control with speed limiter, 8G1 High beam assistant, KA2 With rearview camera system (version 2), 6K4 "FRONT ASSIST" incl. adaptive cruise control, EM1 Driver alertness system, F89 Light alloy wheels 6 1/2J x 17, 6XD Exterior mirrors, electrically adjustable and heated, FA01 Brake assist, 6I1 Driver assistance system: Lane assist, MP3A SmartLink (Apple CarPlay and Android Auto), 4UP Knee airbag, driver side, 4X4 Head airbag system, ALU light alloy wheels, WIPA Winter Package Plus, ABRG Driver assistance system: Automatic distance control (ACC) with front radar assistant (up to 210 km/h), FA41 Driver assistance system: Driver alertness system, 00A Rear overhang short, 0AS Stabilizer bar, front, 0B2 Wheelbase, 0N6 Rear axle "Standard", 0VC On-board literature in German, 1C1 Frost protection up to -25 degrees Celsius, tolerance up to -30 degrees C, 1EX Special type plate for EC for M1 passenger cars, 1NL Covers for light alloy wheels, 1PA Wheel bolts standard, 1U8 Without folding table on front seat backrest, 1Z0 Standard fuel initial filling, 3A2 Child seat anchor for child seat system I-Size 2 x top tether and child seat anchor front BF side, 3D1 Center console, 3J1 Headrests for front seats, height-adjustable, 3LD Door trim insert - fabric, 3ZU Three-point automatic seat belts in the rear, outer with ECE label, 4E2 Without electric operation of the tailgate, 4P0 Rear floor module, version 1, 4Z5 Glove compartment flap with light, 4ZA Decorative trim standard, 5K7 Transport protection film (minimum protection) with additional transport protection measures, 6F2 Emblems, 6NA Headliner, gray, 8FA Without 2nd battery, 8IY LED main headlights with lens, 8QL Key for locking system with remote control, 8Y0 Single-tone horn, 8Z., We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Kodezwnwvspfx Achonb Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage

Condition: used, Electric motor, three-phase motor -Manufacturer: Skoda type 2.4 kW 1410 rpm -Power: 2.4 kW -Voltage 220/380 V -Shaft: Ø 24 mm -Length shaft: 55 mm -Construction: Kedpfx Ashc Uxzschjnb -Dimensions: 335/300/H230 mm -Weight: 36 kg

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are offering this machine for sale. It is connected and can be tested under power. A video of the machine can be sent via WhatsApp. Centre height above bed: 1,250 mm Maximum swing diameter over cross slide: 2,000 mm Maximum swing diameter over bed: 2,500 mm Maximum workpiece weight between centres without supports: 80 t Bed height: 700 mm Bed width: 3,000 mm Distance between centres: 7,000 mm Machine weight: approx. 160,000 kg Knodpfxov Spvmj Achsb

Condition: good (used), turning diameter over bed slide: 1,250 mm, turning length: 8,000 mm, workpiece weight (max.): 12,500 kg, DBC Turning Length: 8000mm Swing over bed Ø: 1280mm Swing over cross slide Ø:1000mm Length: 12500mm Width: 2100mm Height: 1800mm Knjdpfx Aowwtcmechob Weight: 35000kg

Condition: ready for operation (used), travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 4,500 mm, SKODA WD 160 A BORING MACHINE Spindle diameter: 160 mm X-axis travel: 7,000 mm Y-axis travel: 4,500 mm Z-axis travel: 1,200 mm B-axis travel (table): 360° W-axis travel (ram): 1,250 mm Rotary table: 2,000 x 2,000 mm - Maximum weight: 20 t - Longitudinal travel: 1,250 mm CNC: Fagor 8055 Electronic handwheel Spindle speed: 275 - 2,570 RPM Tool: ISO 50 2 x 90° square Knedpfjzb H N Tsx Achjb Universal and 90° head

Condition: used, Year of construction: 1985, functionality: unexamined, Rotary and sliding table | Brand: SKODA | Type: SEA40P Year of manufacturing: 1985 The table can be inspected by prior arrangement. TECHNICAL SPECIFICATIONS: - Control: variable - Measurement systems: Heidenhain - Axis drives: Siemens - Maximum table load: 40 tons - Table clamping area: 2.400 x 2.400 mm - Total height of the rotary table: 1.210 mm - Table stroke (W-axis): 2.500 mm - Inner circular guide: * Centre diameter: 1.210 mm * Guide width: 250 mm - Outer circular guide: * Centre diameter: 2.200 mm * Guide width: 165 mm - Feed rates, infinitely variable: * Longitudinal feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10,000 mm/rpm * Rotational feed – range: 0,5 – 2.000 mm/rpm * Rapid traverse: 10.000 mm/rpm - Rotational feeds, relative to the diameter: 1.600 mm - Motor torque (speed): 170/300 Nm/rev Knodpfszgu Uaox Achob - Total power requirement: 120 kVA - Table weight approx.: 28 tons - Dimensions L/W/H: 7,3 x 3,5 x 1,21 m ACCESSORIES/EQUIPMENT: - Control cabinet for the table positioners, power electronics, positioners (without control) - Documentation No guarantee is given as to the completeness or accuracy of the technical specifications or the equipment. - Subject to prior sale.

Condition: used, Year of construction: 1971, turning diameter over bed 1250 mm turning diameter over slide rest 900 mm turning length 5000 mm faceplate 1250 mm workpiece weight in steadies max. 20000 kg workpiece weight 16000 kg weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Knsdpfxey D A Edo Achjb Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1974, Parallel lathe SKODA SIU 160 x 8000 mm Number of guides: 3 Swing over bed: 1,620 mm Swing over cross slide: 1,250 mm Distance between centers: 8,000 mm Maximum weight between centers: 40,000 kg Spindle speed: 0.45 – 224 rpm Accessories: steady rests Video showing the machine in operation is available. Kodpezw Uifofx Achjnb

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm Knodporu Rfhjfx Acheb SPECIAL PRICE MACHINE MUST MOVE CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *

Condition: used, Year of construction: 1983, turning diameter over bed 1790 mm turning diameter over slide rest 1250 mm turning length 5000 mm Kjdpfey D A D Tjx Achenb faceplate 1250 mm workpiece weight 4500 kg control Siemens type System 8 T mm turning speeds 1,1-300 U/min total power requirement 72 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team