Used Interior Design for sale (17,842)

Condition: ready for operation (used), Year of construction: 1990, Punching width: 500mm, rated current: 20A, control voltage: 220V, weight: 2.5t. No defects known, regularly maintained, operating hours unknown. With punching tools and punching blade, only little documentation available. An on-site inspection is possible. Kwodpfew U T Ucsx Ahzst

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Kwodpfx Ahsihp Ipozet

Condition: used, tank capacity: 630 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, steel (galvanized); container made of 1.4435 (V4A) with plastic inner lining Overall width: 830 mm Overall height: 1,450 mm Overall length: 1,550 mm Max. overpressure: 0.2 bar Location: Bremen Nameplate: Vacuum: 0.2 bar Volume: 630 liters Product-contact material: Halar E-CTFE coating Condition: used Last application: Pharmaceutical industry Kwodpfjyci Syox Ahzst TANK Max. permissible operating temperature: 80 °C Bottom: Conical bottom Mounting style: Mobile on castors EQUIPMENT Manway / Dome: in the top (DN 400) Outlet: 250 mm Note: Signs of wear

Condition: used, tank capacity: 630 l, GENERAL Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); container made of 1.4435 (V4A) with plastic inner coating Overall width: 830 mm Overall height: 1,550 mm Overall length: 1,550 mm Max. overpressure: 0.2 bar Ksdpfx Ahjyci Sgjzewt Location: Bremen Nameplate: Vacuum: 0.2 bar Volume: 630 liters Product-contact material: Halar E-CTFE coating Condition: used Last application: pharmaceutical industry TANK Max. permissible operating temperature: 80 °C Bottom: conical bottom Support type: mobile frame EQUIPMENT Manhole/dome: on top head (DN 400) Outlet: 250 mm Note: signs of use

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm table surface area 1.000 x 560 mm max. table load 800 kg Kwedsx R Enuopfx Ahzot number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 40.108h operating hours, 12.656h spindle hours - incl. Lehmannn 4th Axis - incl. Lehmann tailstock - incl. 20x SK 40 tools

Condition: used, Year of construction: 2013, x-travel 835 mm y-travel 510 mm z-travel 510 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min feed power 5.000 N total power requirement 28 kVA weight of the machine ca. 4,0 t Kwodpfx Asx R Ennohzot dimensions of the machine ca. 4,5 x 3,5 x 2,8 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 33.796h operating hours, 10.411h spindle hours - incl. 20x SK 40 tools

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design Kwedpfx Aox R Em Dshzjt - 20,796h operating hours, 7,544h spindle hours

Condition: excellent (used), mileage: 923,715 km, power: 355 kW (482.67 HP), first registration: 10/2018, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 6,160 mm, total width: 2,550 mm, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, soot filter, spoiler, traction control, trailer coupling, = Additional options and accessories = - Alarm system - Aluminum fuel tank - External thermometer - Heated mirrors - Passenger seat - Leaf spring suspension - Roof hatch - Roof spoiler - Differential lock - Digital tachograph - High beam headlights - Air conditioning - Air suspension - Air-suspended seats - Particulate filter - Radio/CD player - Sleeper cab - Side door - Sun visor Kwjdpfexgngvsx Ahzjt - Lane departure warning system - Stability control - Auxiliary heater - Pre-heating system = Additional information = Technical information Number of cylinders: 6 Engine displacement: 12,902 cc Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65 R 22.5; Max axle load: 8,000 kg; Steering axle; Left tire tread: 40%; Right tire tread: 40%; Suspension: leaf spring Rear axle: Tire size: 315/70 R 22.5; Twin tires; Differential lock; Max axle load: 11,500 kg; Left inner tire tread: 30%; Left outer tire tread: 30%; Right inner tire tread: 30%; Right outer tire tread: 30%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,425 kg Payload: 12,075 kg Gross vehicle weight: 20,500 kg Functionality Body manufacturer: ZF Condition Technical condition: very good Visual condition: very good

Year of construction: 2019, operating hours: 31,933 h, condition: used, machine/vehicle number: 710300, Weight: 4,200 kg, 7-position tool changer, handling robot YASKAWA YR-MA1440MH12-A00, year of manufacture: 2018, serial number: K17464-426-1, automation system/workpiece storage EGS Automation Benzinger, year of manufacture: 2018, serial number: 180103, SIEMENS control, tool monitor, chip conveyor KNOLL 320 S-1/225, year of manufacture: 2018, serial number: 1350025, HYDAC cooling unit, compressed air filter system DSL Sigmatec 15, joining module PROMESS UFM Line5 Kodpfex Aki Esx Ahzswt

Year of construction: 2018, operating hours: 32,615 h, condition: used, machine/vehicle number: 710299, Travel ranges (X/Y): 37/25 cm, Weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool Monitor, KNOLL 320S-1/225 chip conveyor, Year of manufacture: 2018, Serial number: 1350024, HYDAC cooling unit, DSL Sigmatec 1 compressed air filtration system, YASKAWA YR-MH00012-A00 handling robot, Year of manufacture: 2018, Serial number: K17752-594-1, EGS Sumo Ecoplex Automation Benzinger automation system/workpiece storage, Year of manufacture: 2018, Serial number: 180102, double, 1 auxiliary table Ksdpfjx Akixsx Ahzowt

Condition: excellent (used), S 360 F Delphin Design Armchair with Armrests Stackable, elegant, easy to link, low maintenance, and very comfortable. Kwedpfjya Iw Nex Ahzet Anthracite grey plastic (RAL 7016) 50 units in stock Manufacturer: THONET - DELPHIN DESIGN Chair width: 58 cm, with a row spacing of only 53 cm. Depth: 55 cm Height: 82 cm Steel tube frame with armrests, chrome-plated. Armrest pad: Elastomer plastic Seat and backrest: Anthracite grey plastic Versatile applications: office, coworking spaces, events, trade fairs... Easy handling and minimal setup and breakdown times Manufacturer: Thonet Designer: Delphin Design Material: Polypropylene Width (cm): 58 Depth (cm): 55 Height (cm): 82 Original price per chair: 490 EUR

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. Kwjdelypy Eopfx Ahzst The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, tank capacity: 24,000 l, GENERAL Design: upright Notes: 1 manway approx. 320 x 420 mm in the cylinder; total height as per drawing; tanks professionally cleaned and overhauled by the manufacturer in 2024; brand-new outlet valves, sampling valves, and manway gaskets have been installed. Internal diameter: 3,450 mm Total height: 3,650 mm Base design: feet adjustable in height Location: Outdoor storage 89340 Leipheim Technical documents: drawing Volume: 24,000 liters Kjdpfx Ahjxqb A Eszjwt Cylinder wall thickness: 2.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous use: wine storage TANK Number of feet: 6 pcs EQUIPMENT Manway / Dome: in cylinder Outlet: 100 mm MATERIAL QUALITY External surface: marbled Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Bottom plate thickness: 4 mm Top plate thickness: 3.5 mm

Condition: excellent (used), S 360 F Delphin Design Armchair with Armrests Stackable, elegant, easy to link, low maintenance, and very comfortable. Anthracite grey plastic (RAL 7016) 50 units in stock Manufacturer: THONET - DELPHIN DESIGN Chair width: 58 cm, with a row spacing of only 53 cm. Depth: 55 cm Height: 82 cm Steel tube frame with armrests, chrome-plated. Armrest pad: Elastomer plastic Seat and backrest: Anthracite grey plastic Versatile applications: office, coworking spaces, events, trade fairs... Easy handling and minimal setup and breakdown times Manufacturer: Thonet Designer: Delphin Design Kwedex Upnajpfx Ahzot Material: Polypropylene Width (cm): 58 Depth (cm): 55 Height (cm): 82 Original price per chair: 490 EUR

Condition: excellent (used), S 360 F Delphin Design Armchair with Armrests Stackable, elegant, easy to link, low maintenance, and very comfortable. Anthracite grey plastic (RAL 7016) 50 units in stock Manufacturer: THONET - DELPHIN DESIGN Chair width: 58 cm, with a row spacing of only 53 cm. Depth: 55 cm Height: 82 cm Steel tube frame with armrests, chrome-plated. Armrest pad: Elastomer plastic Seat and backrest: Anthracite grey plastic Versatile applications: office, coworking spaces, events, trade fairs... Easy handling and minimal setup and breakdown times Kwjdpfx Ahsx Upi Rjzst Manufacturer: Thonet Designer: Delphin Design Material: Polypropylene Width (cm): 58 Depth (cm): 55 Height (cm): 82 Original price per chair: 490 EUR

Condition: excellent (used), In this offer you acquire a new office island "Buzzispace | Focus ". Ideal for furnishing open-plan offices, open space concepts or call centers. Object for sale: 1 x Buzzispace | Focus (Blue) incl. desk with sockets Kwedpod Rw Ivjfx Ahzst Dimensions: 140 x 220 x 135 cm New price: approx. 8000€ There are 8 pieces in total. All offered furniture comes from an office floor with first occupation in 2016. Condition: This offer is a used article, which may show signs of use and wear. (minor scratches or yellowing). As good as new condition! The furniture was professionally dismantled. For further information you can of course also contact us personally. Shipping is possible on request!

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Kwjdpfxofi Tmcj Ahzst

Condition: new, functionality: fully functional, color: black, overall weight: 700 kg, empty load weight: 700 kg, operation weight: 700 kg, first registration: 02/2025, Year of construction: 2025, Equipment: UVV, hydraulics, === SPECIFICATIONS === • Model: Manitou VARIOWINCH W 7200 V Kodpfx Ahsxw Uftszjwt • Year: 2025 • Capacity: 7,200 kg • Maximum hook speed: 60 m/min • Cable length: 76 m • Hydraulic motor with automatic cable stop • Oil-immersed negative brake • Fully automatic variable-speed control • Certified self-locking swivel hook • Storage stand with forklift sleeves • Weight: 700 kg • Dimensions on stand: 2.40 × 1.20 × 1.22 m • CE certified === HIGHLIGHTS === • Brand-new unit, unused • Converts MRT telehandlers into crane applications • Up to four times faster than standard Manitou 5T winches • Automatic speed adjustment based on load • Operable from cab or remote control • Suitable for industrial lifting, prefab, steel construction • Fully compatible with all MRT Vision+ models === COMPATIBILITY === MRT 2260 / 2260e MRT 2570 MRT 2660 / 2660e MRT 3060 MRT 3570 / 3570 ES MRT-X series === CONDITION === New. Unused, fully checked, ready for operation. === LOCATION === Sittard, Netherlands === DELIVERY === • Pallet or frame-packed • Export documentation available • Crane loading upon request

Condition: used, mileage: 598,116 km, power: 353 kW (479.95 HP), first registration: 03/2019, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: grey, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,720 mm, total width: 2,550 mm, Year of construction: 2019, Daf XF 480 Superspacecab - Dutch registration documents - Retarder - Special interior - Fridge - Microwave - Leather seats - Heated driver’s seat - Parking cooler - Parking heater - Alcoa wheels Kjdpfxoxu Uluo Ahzjwt - Bull-bar - Light bar - Air horns = Further Information = Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steered; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf suspension Rear axle: Tire size: 315/70R22.5; Twin tires; Inner left tread: 70%; Outer left tread: 70%; Inner right tread: 70%; Outer right tread: 70%; Suspension: Air suspension Number of cylinders: 6 Curb weight: 7,843 kg Payload: 11,657 kg Gross vehicle weight: 19,500 kg Model number: XF 480 4x2 SSC / RETARDER / SPEC = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian as well. We strive to provide accurate information, but no rights can be derived from the above details.

Year of construction: 2018, operating hours: 34,879 h, condition: used, machine/vehicle number: 710298, Travel paths (X/Y): 37/25 cm, weight: 4,200 kg, 7-position tool changer, SIEMENS Sinumerik control, NORDMANN Tool-Monitor tool monitoring device, KNOLL 320S-1/225 chip conveyor, year of manufacture: 2018, serial number: 2074174, HYDAC chiller, compressed air filtration unit DSL Sigmatec 15, YASKAWA handling robot YR-MH00012-A00, serial number: K17731-034-1, year of manufacture: 2018, automation system/workpiece storage EGS Sumo Ecoplex Automation Benzinger, year of manufacture: 2018, serial number: 180101, double position, 1 side table Kwsdpfx Ajx Akirohzjt

Condition: excellent (used), digital internal sensor Brand Intertronic Type EID 1010 Measuring range 10-35 mm Kodpovwa D Eofx Ahzowt (108147)

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW tool taper SK 40 table surface area 2.900 x 700 mm max. table load 2.150 kg number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 40 m/min feed speeds max. 40.000 mm/min Ksdpfev Dxxnox Ahzswt feed power max. 8 kN total power requirement 54 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 8,0 x 5,6 x 2,8 m CNC - Travel Column Milling Machine DECKEL MAHO - DMF 260 New Design - NC dividing head (A-axis) - Operating hours: 18.709h spindle run - overhauld spindle installed (Dec 2023) - Z-axis weight compensation changed (Feb 2023) - Production package - Option: tool clamping for tightening bolts - WITHOUT vices!

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control 840 D sl Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 130 / 87 Nm tool taper SK 40 DIN 69871 table surface area 630 x 500 mm max. table load 300 kg Swivel range 115 (-110 / +5) ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse X/Y/Z: 24 m/min feed speeds X/Y/Z: 10.000 mm/min total power requirement 32 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal Kwsdpjwntx Nofx Ahzst DECKEL MAHO - DMU 50 - 5 Axis simultaneous - swivable rotary table

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Kwsdpfoxw Uf Tex Ahzot

Condition: good (used), Year of construction: 2008, Urban PF 3000 / machining center in portal design, Year of construction 2008, Kedpfx Asu Tptcehzowt Heidenhain iTNC 530 control system, travel X/Y/Z 3210/695/585 mm, Machining center in portal design, Drilling capacity in ST 60 Ø 18 mm, M 16, Spindle speed up to 8,000 rpm, SK 40, Ww 12 times, Table size 3,000 x 700 mm, chip tray, coolant system, electric handwheel, tool length measuring device,