Used Slide Sanding for sale (9,540)

Condition: new, Year of construction: 2025, New machine Gkedpfx Aex Rv Dyekhsd Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Gkedpjxlk Rbjfx Akhsd Configuration: 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately.

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark Gkodpfxexfl Eas Akhsd

Year of construction: 2018, condition: excellent (used), I sell the washing machine for sanding bands for widebelt sanding machines NETEK Denmark. Working width up to 1350mm. For longer lifetime of sanding bands. Gkedpjw Ancxsfx Akhjd Available immediately.

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Gkjdpsw Uc T Isfx Akhed Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH tertiary impact crusher is an advanced crushing machine that provides high efficiency in rock crushing and sand making processes. It delivers superior performance, especially in crushing medium-hardness materials with low abrasive properties. This machine stands out with its ability to produce fine, cubic-shaped material down to 0.5 mm in a single pass. It is an ideal choice for producing high-quality aggregate in sectors such as construction, ready-mix concrete production, and asphalt applications. Tertiary crushers ensure that the material is produced in homogeneous sizes during the crushing process and enable more efficient utilization of the material thanks to their high reduction ratio. With these features, the CONSTMACH tertiary crusher is also frequently preferred as a “sand making machine” in stone crushing plants. Thanks to its high-speed rotating rotor system and adjustable crusher plates, the material can be crushed to the desired fineness. The hydraulic opening and adjustment mechanism allows operators to perform maintenance and replacement operations safely and quickly. Replaceable wear parts ensure long-term use and low operating costs. Furthermore, its design, suitable for operation in closed-circuit systems, provides consistent quality across different product sizes. Tertiary Crusher Technical Specifications MODEL: CTC - 1275 Rotor Diameter: 1,100 x 750 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 100 mm Capacity: 60 - 80 t/h Motor Power: 110 kW Weight: 9,500 kg MODEL: CTC - 1210 Rotor Diameter: 1,100 x 1,000 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 120 mm Gsdjxqgtvopfx Akhjkd Capacity: 80 - 135 t/h Motor Power: 160 kW Weight: 12,500 kg MODEL: CTC - 1212 Rotor Diameter: 1,100 x 1,200 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 120 - 170 t/h Motor Power: 200 kW Weight: 15,500 kg MODEL: CTC - 1215 Rotor Diameter: 1,100 x 1,500 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 230 - 250 t/h Motor Power: 250 kW Weight: 18,500 kg Why Choose CONSTMACH Tertiary Crushers CONSTMACH offers reliable solutions in crushing, screening, and concrete production equipment that meet international standards. Our tertiary impact crushers increase your operation's production efficiency with high quality, durability, and low maintenance costs. We are always by your side during the after-sales process with our spare parts and technical support services. If you are looking for a long-lasting, energy-efficient, and high-performance stone crushing machine, CONSTMACH is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Gjdexp Scgopfx Akhskd Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece Gkjdpjxw Tc Rsfx Akhed -Dimensions: 185/60/H45 mm -Weight: 0.9 kg/pc.

Condition: used, Year of construction: 2023, machine/vehicle number: Werksüberarbeitungsnummer: WÜA23051204239033, functionality: fully functional, power: 5 kW (6.80 HP), cutting width at rip fence: 1,300 mm, main saw diameter: 550 mm, section length (max.): 3,200 mm, table length: 840 mm, F45 Elmo Drive GM010.0407 Machine height: 910 mm Eye-level control panel Double-sided tilting Max. blade diameter: 550 mm Motor: 5.0 kW (6.8 HP) Vario 2-axis scoring unit with double-sided tilt LED lighting Table extension: 840 mm Gkodpsymdh Dsfx Akhjd Double roller carriage: 3200 mm Mitre/fence stop DIGIT LD CNC parallel fence: 1300 mm Front support roller DUPLEX 1350 mm (2019)

Condition: used, maximum load weight: 37,725 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 09/2016, next inspection (TÜV): 10/2027, total length: 9,460 mm, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2016, Additional information: * Type | First axle: Bridgestone R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Bridgestone R * Type | Third axle: Bridgestone R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% Gksdpfs Ahmidsx Akhsd * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Position | First axle: Rear * Brand | First axle: Other * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension Additional features: * Homepage * Lift axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM and are valid only for export.

Condition: used, Mounting rails sliding set, pipe clamps, pipe fastening, pipe clamp holder -Manufacturer: Sikla, sliding set for Siconnect Pressix rail system -Type: GS -Quantity: 22x sliding kit available -Price per piece Gkjdpfxsq Sbgle Akhsd -Dimension: 275/190/H55 mm -Weight: 1.8 kg/pc.

Condition: good (used), Year of construction: 2002, Brand: MABO Gjdpfx Akjpitqmohskd Type: Participate Machine no: 76 Year of manufacture: 2002 - Long belt sander with electric raising/lowering of the work table, sanding shoe Tech info: Work table 2000x800mm Sanding belt dimension 6060x150mm 2 speeds on the sanding belt Size for transport: Length: 320 cm Width: 130 cm Height: 160 cm Stock no: 2001159BXM

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Swiveling edge sanding unit, Motorized belt oscillation, Godpfx Akeffyc Njhskd Support table at the idler pulley, Pneumatic belt tensioning, Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale.

Condition: new, Industrial belt sander Scantool 75 x 2000 with integrated dual dust extraction system Sanding belt 75 x 2000 mm Working width: 75 mm Motor: 4.1 HP Speed: 34 m/s Gjdpfxeflt Ams Akhjkd Table height: 475 to 1240 mm Sanding belt dimensions: 75 x 2000 mm Platen size: 530 mm Weight: 100 kg The Scantool industrial belt sander models with dual dust extraction system, 75 x 2000 and 150 x 2000, are powerful, high-quality machines built to the strictest environmental and safety standards. The belt sanders are equipped as standard with a motor brake, adjustable work height, eye protection, angle stop, and motor protection switch with zero-voltage release. This low-noise machine with CE marking is ideally suited for sanding all metals. Motor protection switch with zero-voltage release Separate emergency stop Motor brake Adjustable angle stop Eye protection The continuously adjustable work height enables an ergonomically correct working position. Perfect design for fast, efficient, and safe sanding. Self-adjusting belt tension. Danish top quality.

Year of construction: 2026, condition: new, Galvanized on request. 1. drum screen, 1600 mm, length 2800 mm, 4 mm braided wire, Perforation 20x20mm (others on request), drum speed approx. 13.5 rpm, 4kW, 2. Undersize and cross conveyor belt - length / width to discuss, 3. Hopper with a length of 3300mm, a width of 1500mm with adjustable belt speed through the variator, 4. Mounted on a certified frame for a hook crane, 5. cleaning brush with a diameter of 300 mm, Gkedpfxoixt Rhe Akhjd length 2000mm, 6. Drum drive via a gear motor + 2 rubber drive wheels with a diameter of 230 mm, 7. Supports with adjustable height, 9. Total height with brush approx. 2484mm, outer width approx. 2400mm, total length 7500mm, 10. Equipped with an electrical control panel, switch 0/1, safety stop switch 2 x , engine overload switch, 11. Total power supply 9.2KW, 12. CE certificate, 12 months warranty, made in EU (Poland), 13. Capacity about 50t/h (black earth), 14. Weight: about 3 tons. 15. Tramec durable gear motor (with speed control in the Bunker), 16. FAG and SKF rolling bearings, 17. Structures made of closed steel profiles - steel class S355, 18. Conveyor rollers made of high quality materials. SKF ZZ bearings only, 19. Drum construction protected against corrosion - hot zinc as an option, 20. Drum Structure - S355 steel. Wall thickness 3mm, perforation for agree (option), 21. Adjustable spring brush. The brush pressure force can be adjusted, 22. Electrical sockets and emergency stop switches, on either side of the Machine, 23. Drum Covers. Powder coated in the paint booth. We produce drum screening machines: 1) Stationary, semi-mobile, mobile, 2) diameter, drum length - on request, 3) Electric, Diesel Electric. We have many references in the European Union. We speak Polish, German, English and Russian.

Year of construction: 2012, condition: like new (used), Fixed and live bushing - Iemca Smart 320/32 new in 2018 - very well equipped - chip conveyor - Mitsubishi M70 Control Gsdsikbdvspfx Akhjkd

Condition: new, Year of construction: 2025, NEW MACHINE Gsdpfx Aerwx Itskhekd please ask for daily updated price! We will make you an individual offer!

Condition: good (used), Ehemann belt sanding machine FU 3 with 3 sanding units Oscillating. Gkedjtdpa Ujpfx Akhsd Sanding width 400 mm. Height approx. 150 mm. Sturdy machine with little wear.

Condition: new, Year of construction: 2024, table length: 1,450 mm, table width: 500 mm, overall weight: 550 kg, input voltage: 400 V, oscillation stroke: 20 mm, input frequency: 50 Hz, OBS 150 ARCO edge sanding machine. NEW. Sanding height 150 Oscillation stroke 20 mm Gkjdper Erhwofx Akhed Machine length 1450 mm Front side of the processing side is curved Table spread (adjustable) Rear side for straight processing. Table tiltable up to 45 gr. Motor power 2.5 kW, 2 speeds. Sanding speed 11.5 and 8 meters/sec. Central extraction Diam 140 mm. Pneumatic tensioning of sanding belt. The machine is very suitable for staircase manufacturers.

Condition: new, Sanding belt width: 150 mm Godogzvvcspfx Akhekd Sanding belt length: 2000 mm Grain size: 100

Year of construction: 2001, condition: good (used), I sell the widebelt sanding machine Costa SA2 TS 1350, year 2001. Configuration electronic segmented pad - brushing unit. Working width 1350mm Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2600kg 1 motor 11 kW Gkodpfjg Trufox Akhed End brushing unit with dust extraction. Including documentation. Condition good. Available immediately.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty Gksdpehcipgsfx Akhjd This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. Gkjdpfeha E S Tex Akhed We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. Godpfx Aeq Igiiekhekd 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Gksdpfxsdnxydj Akhsd Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.