Used Sliding Panel Saw for sale (21,477)

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, 5.5 kW (7.5 HP), 3 spindle speeds 15″ touchscreen (19:6) Motorized height and tilt adjustment Double roller carriage 3,200 mm Tilting range 0 – 46° Max. cutting height 154 mm Main saw blade D = 300 – 450 mm Fedpfx Aoyw Rz Henyegd Large safety hood Scoring unit with LED lighting Parallel fence DIGIT X, cutting width 1,410 mm Angle-mitre fence 3,450 mm, without length compensation

Condition: new, Year of construction: 2026, 3-axis control for saw blade height and swivel adjustment, as well as for the parallel fence. Fodpfx Asza Eyzenysgd • 7.5 kW / 10 hp motor • Maximum cutting height: 155 mm (90°) / 110 mm (45°) • Scoring unit with electric height adjustment and motorized, axial impulse adjustment, and automatic lifting. • Adjustable mitre fence with length compensation. • Cutting width with parallel fence: 1,100 mm • Sliding carriage length: 3,200 mm

Condition: reconditioned (used), Year of construction: 1994, functionality: fully functional, Motor power 50Hz 3~ 400V 5.5kW Sliding table 2800 mm without scoring saw Digital angle adjustment display Digital speed display Hydraulic lifting / lowering / tilting Cutting width 1005 mm Manual parallel fence LAP laser system Fodpfx Anjy Icbgjyogd Mitre fence (small) Saw blade diameter 250 - 450 mm

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Fjdpfxevi H Die Anyogd Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: ready for operation (used), Connection voltage 380V Fgjdpsy Hq N Ajfx Anyed Main motor 7.5kW Scoring unit 0.75kW Variable drive Double roller carriage 3000mm Electric height and tilt adjustment Cutting width 1000mm, CNC controlled Clamping system AKE Saw blade diameter max. 500 mm Control panel at eye level Swiveling front table Template holder 2-axis scoring unit Table extension 840mm Angle fence PQS Standard PSV with narrow and wide hood

Condition: used, Cutting area: 5300 x 2200 mm Cutting depth: 80 mm Fedoynttfepfx Anysgd Location: Nattheim

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Fodpfx Aeyyap Eonyogd

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, measurement system: scale, saw head tilting: manual, saw feed: manual, extraction: external extraction, saw beam locking: manual, weight approx.: 1200 kg, dimensions: 5300 x 1200 x 2900 mm, motor power: 5.5 kW. Storage location: supplier. Fgsdoy Idb Uepfx Anysd

Condition: used, Year of construction: 2006, Motor-adjustable parallel fence Lengthwise stop with display One-sided motorized pivoting Fjdpfx Anjzawiueyogd Sliding carriage 3000 mm 5.5 kW Scoring saw Location: Nattheim

Condition: used, Year of construction: 2015, functionality: fully functional, operating hours: 240 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, cutting width (max.): 1,300 mm, saw blade diameter: 450 mm, year of last overhaul: 2023, Equipment: scorer, We are offering this used Altendorf F45 EvoDrive panel saw, manufactured in 2015. Main motor: 5.5 kW Saw blade diameter: 250-450 mm Scoring saw motor: 0.75 kW Saw blade that can be swiveled to one side Digital stops Parallel fence with a cutting width of 1300 mm Control panel at eye level Touchscreen control and buttons for input Double roller carriage with a carriage length of 3200 mm Front support roller 240 operating hours Included are 8 saw blades for wood, aluminum, and plastics. Some of these may need sharpening. Fgedpfx Aozkp D Dsnyjd The saw received a major service last year. During this service, defective parts were replaced, the roller carriage was serviced, and all angles were readjusted. Available from July 27, 2026. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1994, Machine length: 2800 mm Length stop: Fixed, 90° Duplex cutting system Fgjdpfezh Hwcox Anyjd Cutting width: 1300 mm with manual adjustment 7.5 kW No pre-scoring device Location: Nattheim

Condition: used, machine/vehicle number: 008656, Max. panel width: 3100 mm Fgodpfjzg Uz Tox Anyjd Max. panel length: 3100 mm Main saw blade projection: 55 mm No of Grippers: 5

Condition: used, machine/vehicle number: 008637, Max. panel width: 4500 mm Fgjdpjzg Uztefx Anyod Max. panel length: 4500 mm Main saw blade projection: 95 mm No of Grippers: 10

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested partially refurbished Manufacturer: Martin Type: T76 Year of manufacture: 1978 Machine number: V 102419 Steel guides Height adjustment, hydraulic Swivel adjustment, hydraulic Speed Carriage length mm approx.: 3300 Cutting width mm approx.: 1050 Max. blade diameter mm: 400 Swiveling up to °: 45 Dust extraction connection mm: 120 + 80 Fgedpfx Aozkvzisnysd Space required approx. L x W x H mm: 3400x1800x1500 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty

Condition: used, Year of construction: 2002, with CNC parallel fence Machine in working order, completely set up used good condition cleaned functionally tested Fgedpfezkvy Sex Anyjd partially refurbished top equipment Manufacturer: Altendorf Type: F45 Elmo CE Year of manufacture: 2002 Machine no.: GS tested CE type-tested GS dust-tested Motor kW: 5.5 Steel guides Adjustable parallelogram guard Control panel swivels upwards Parallel fence with automatic control Aluminum parts anodized Height adjustment, electric Swivel adjustment, electric Position control 3 axes Digital display for height Digital display for cutting angle Digital display for parallel fence Speed: x Laser cutting line indicator Table length mm approx.: 3000 mm Cutting width mm approx.: 1000 mm Cutting length mm approx.: 2905 mm Cutting height mm approx.: 150 Max. blade diameter mm: 450 Swivel up to °: 45.5 Table extension mm approx.: 840 mm Dust extraction connection mm: 120 / 80 Space required approx. L x W x H mm: 3000x4200x1800 Weight approx. kg: 1000 Total connection value approx. kW: 6.25 Kw Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 2.21 kW (3.00 HP), input voltage: 400 V, input current: 19 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 1,270 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 3,700 rpm, total length: 3,200 mm, total width: 5,155 mm, total height: 1,550 mm, overall weight: 691 kg, table height: 900 mm, Equipment: CE marking, documentation/manual, saw blade guard, Year of manufacture: 2022 9 kW motor Fgedpfoy Shx Sox Anyed Scoring unit Panel processing up to 3.2 m length Squaring fence with 2 digital readouts Parallel fence with 1 digital readout Excellent condition

Condition: used, Year of construction: 2016, Sliding carriage, 3200 mm cutting width, 1250 mm, controlled parallel fence, kappa 400 X, pivoting saw unit, 45°, saw blade diameter: 250 - 400 mm, maximum cutting height 135 mm, electric height adjustment and pivoting, motor 5.5 kW, 3 speeds, 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional function: easy-lock quick-change system, main saw blade, pivoting crosscut fence with digital display for length and angle. Fgsdpfx Aoy H Hftjnyod Location: Nattheim.

Condition: used, Year of construction: 1992, max. cutting width: 5300 mm, max. cutting height: 2200 mm, saw blade diameter: 300 mm, max. processing thickness: 80 mm, saw blade bore: 30 mm, lower support: fixed rollers, material support: adjustable plastic slats, measuring system: scale, saw head tilt: manual, saw feed: manual, mounting: free-standing, extraction: external extraction system, saw beam locking: manual, weight approx.: 1500 kg, dimensions: 6300 x 1300 x 2900 mm, motor power: 5.5 kW. Storage location: Nattheim Fgedpfey H E Utex Anyed

Condition: used, Length of the rolling table ca. mm Saw blade diameter ca. 400 mm weight ca. 900 kg Parallel stop: Stop sliding table: 1460 mm with stop extension to 2840 mm Fgodpfow Nrvhsx Anyed Star delta circuit has been renewed

Condition: used, Length of the rolling table ca. 2280 mm Saw blade diameter ca. 400 mm weight ca. 900 kg Parallel stop: Fgodpfx Anjwzmvhoyjd Stop sliding table: 1550 mm with mitre rail incl. side stop extension to 1000 mm Star delta circuit has been renewed

Condition: as good as new (ex-display), Year of construction: 2023, power: 5.5 kW (7.48 HP), cutting height (max.): 2,110 mm, saw blade diameter: 300 mm, cutting length (max.): 4,300 mm, cutting depth: 80 mm, Equipment: scorer, Holz-Her vertical panel saw with TRK extraction system Type SECTOR 1262 automatic Cutting height 2200 x cutting length 4300 mm, cutting depth 80 mm Motor power: 5.5 kW Automatic saw feed for vertical and horizontal cutting, infinitely variable from 6-25 m/min. incl. the following accessories: - CE extraction unit - Pneumatic aluminum sliding grid - center workpiece support - longitudinal stop with digital dimension display Fsdpfxetwpgms Anyjgd - strip stop - digital dimension display for horizontal cut on the control panel - 3 adjustable stop points in the saw beam - SuperCut scoring device incl. 2 WPL knives - Narrow parts unit (2 pieces)

Condition: reconditioned (used), Year of construction: 1987, machine/vehicle number: 1277/8-71, functionality: fully functional, Connected load: 380V, 7A Cutting length: 4300 mm Cutting height: 1925 mm Frame height: 2210 mm Fjdpeh U Sqrefx Anyogd Machine height: 2500 mm Room height: 2540 mm Edge trimming height: 1870 mm Passage height: 1940 mm

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Fjdpfsvvkqgjx Anyegd Storage location: Nattheim

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Bottom support: Fixed rollers Saw head pivoting: Manual Saw feed: Automatic Extraction: External extraction Approx. weight: 1500 kg Motor power: 5.5 kW Storage location: Nattheim Fgjdpfxovvkq Te Anyjd

Condition: used, Storage location: Nattheim Fgsdpevvkrdofx Anyed