Used Sliding Panel Saw for sale (19,748)

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Nwedpfovi H Disx Ahzjg Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: good (used), Year of construction: 1999, with new Siemens control system, joystick and PC controllable; max. cutting length 4.3 m; max. cutting width 2.2 m; already dismantled Nwjdpfxjy I A Nqe Ahzeg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, cutting height (max.): 2,200 mm, cutting width (max.): 4,100 mm, saw blade diameter: 250 mm, height adjustment type: pneumatic, actuation type: pneumatic, total length: 4,100 mm, total height: 2,200 mm, overall weight: 700 kg, Equipment: CE marking, scorer, We are offering this very well-maintained Holzkraft VPS 2241 VR ED vertical panel saw, year of manufacture 2022. The machine was installed and commissioned with us in May 2023. Holzkraft VPS 2241 VR ED – Vertical Panel Saw (Commissioned in 2023, Excellent Condition) The machine is connected and can be inspected under power. I am selling my Holzkraft VPS 2241 VR ED vertical panel saw, purchased new and put into operation in 2023, thus in excellent condition. The reason for sale is business expansion. — Features & Highlights • Scoring unit for clean, chip-free cuts • Digital measurement displays (horizontal & vertical) • Panel positioning on movable rollers (no lifting required) • Pneumatic locking of the saw carriage • Switchable between vertical and horizontal cutting • Robust, torsion-resistant machine frame • Integrated extraction system for direct connection to your dust collection unit Nwodpfx Aoyxv T Rehzog The machine operates perfectly, with no defects. — Technical Data • Cutting length: 4100 mm • Cutting height: 2200 mm • Cutting depth: 60 mm • Saw blade: Ø 250 mm • Motor: 3 kW / 400 V • Weight: approx. 700 kg — Condition • Year of manufacture: 2022 / Installation: 2023 • Low operating hours • Immediately ready for use Forklift available for loading. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Panel saw with sliding table Robland 3200 axis ergo scorer on a separate motor, sliding table length 320 cm main motor 7 kW 3 spindle speeds max blade diameter 400 mm tilt 0-45°, electrically adjustable Nedpsy N Tbaofx Ahzjwg blade height electrically adjustable right-side rip fence, motorized adjustment up to 1250 mm angle fence included VAT invoice 23%, price is net Branded machine, fully functional

Condition: used, Year of construction: 2020, max. cutting width: 3300 mm; max. cutting height horizontal: 2105 mm; max. cutting height vertical: 2150 mm; max. processing thickness: 60 mm; saw blade diameter: 250 mm; saw blade bore: 30 mm; bottom support: fixed, with retractable rollers; material support: flexible plastic slats; small part support: yes; measuring system: scale; saw head tilt: manual; saw feed: manual; mounting: free-standing; weight approx.: 750 kg; motor power: 4 kW; extraction diameter: 100/80 mm. Location: Nodpfx Ahey Erpbozowg

Condition: used, machine/vehicle number: 008394, Max. panel width: 3800 mm Nwjdpfx Aoygtbtohzsg Max. panel length: 3800 mm Main saw blade projection: 55 mm No of Grippers: 4

Condition: good (used), Code: 0295 Brand: PUTSCH MENICONI Model: SVP 620 - CE Standard Manual vertical panel saw - CE Standard Cutting lenght mm 4200 Cutting height mm 2200 Cutting depth mm 45 Motor power Hp 3 Blade diameter mm 250 Device for cutting of short pieces Nwedeyiumiepfx Ahzog Overall dimensions: Mounted machine mm 5400 x 1500 x 2950 h Weight kg 900

Condition: used, Year of construction: 2002, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: yes Saw blade swivel range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut scale display: scale Scoring unit adjustment: electric Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Nwedpfeyq R Acox Ahzeg Machine length: 3500 mm Machine width: 2300 mm Weight: 1200 kg

Condition: used, Year of construction: 1991, Cutting length: 5300 mm Nwjdoy A Hknspfx Ahzog Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: used, Year of construction: 2012, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Nwsdpfxey A Hkuo Ahzeg Scoring unit: no Feed: manual Horizontal cut indicator: Scale Vertical cut indicator: Scale Saw blade diameter: 300 mm Tilting material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: used, Year of construction: 2003, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 2800 mm Cutting depth: 125 mm Nedpfxjy A Hi Do Ahzswg Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Speeds: 3200 / 4000 / 6000 Motor power: 5.5 kW Motor brake: yes / automatic Extraction port: 80 mm and 125 mm Machine length: 3400 mm Machine width: 1800 mm Weight: 820 kg

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 Nwjdsh Dwmlspfx Ahzeg TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: ready for operation (used), Year of construction: 1995, Immediately available Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 60 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Tilting material support: yes Saw blade speed: approx. 4000 rpm Motor power: 3 kW Njdjyv R N Iepfx Ahzjwg Machine length: 6500 mm Machine depth: 1500 mm Machine height: 3000 mm Weight: 800 kg Location: ex-customer site - immediately available -

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 7.33 kW (9.97 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, overall weight: 1,500 kg, The machine is in very good condition. It was acquired through an auction. Nedeyznbfopfx Ahzjwg

Condition: ready for operation (used), Year of construction: 1996, SCM SI16N CE-compliant Sliding table: 3200 mm Cutting width to the right of the saw blade: 1250 mm Saw blade hydraulically raise and tilt Tiltable up to 45 degrees Saw blade diameter: 400 mm Saw blade bore: 30 mm Motor: 380 V, 50 Hz, 5.5 kW Speeds: 3000/4000/5000 rpm Scoring unit: Yes Upper dust extraction hood Extraction diameter: 80/120 mm Required space Length: 3550 mm Width: 2200 mm Height: 1500 mm Weight: 1000 kg Year of manufacture: 1996 Functionality tested Available from early July Machine from training operation More photos coming soon Nsdoy Sv R Ajpfx Ahzowg

Condition: ready for operation (used), Year of construction: 1995, SCM Type Hydro 3200 CE - compliant Sliding table 3200 mm Cutting width to the right of the saw blade 1250 mm Saw blade hydraulic lifting and tilting Tiltable up to 45 degrees Saw blade diameter 400 mm Blade bore 30 mm Motor 380 Volt, 50 Hz 5.5 kW Speeds 3000/4000/5000 rpm Scoring unit Top dust extraction hood Extraction diameter 80/120 mm Space requirements Length 3550 mm Width 2200 mm Height 1500 mm Nsdpfx Ahjy Sv Rpozowg Weight 1000 kg Year of construction 1995 Functionally tested Available from early July Machine from training workshop More photos coming soon

Condition: excellent (used), Catalogue number: 7885 TECHNICAL DATA - Max main blade diameter: 400 mm - Max cutting height: 120 mm - Main blade adjustable up/down and at an angle - Large blade guard Nwedjyg Iifepfx Ahzjg - Spindle diameter: 30 mm - Cutting length on sliding table: 1400 mm - Cutting width at guide: 1300 mm - With side sliding table - Guide on side table adjustable at angle - Main saw motor power: 4 kW - 2 speeds: 3000/4500 rpm - Table dimensions: 1120x1020 mm - Table dimensions with extension: 1630x1730 mm - Extraction port diameter: 80 mm, 140 mm - Dimensions (L/W/H): 3300x2180x1450 mm – weight: 1040 kg ADVANTAGES – Polish production – DTR documentation – Used saw - Very good condition Net price: 9900 PLN Net price: 2360 EUR (at rate 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: new, CATALOG NUMBER RE036 Nedsyz N T Ajpfx Ahzewg 2 axes – electric control for main saw blade lift and tilt with electronic display for height and angle, control panel integrated into the machine body – Brand new, ex-demo machine – DTR + CE documentation included – Cutting width at fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilting: 0-46° - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300-400 mm - Max scoring saw diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring saw speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at fence (standard 1050 mm): 1300 mm - Sawing width using end stops on auxiliary table: 215-3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 5-115/3.5-80 mm - Cutting height for 400 mm blade 90°/45°: 25-140/15.5-95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle fence – with aluminum bar Net price: 47,000 PLN Net price: 11,300 EUR (based on exchange rate of 4.15 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm Nwjdpfsyvivmex Ahzeg - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA Nwodpfx Aheyviupezsg - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 1996, Sliding carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 145 mm Scoring unit: no Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: - Rip fence display: digital readout Crosscut rule display: scale Saw blade diameter: 450 mm Speeds: 4 Nwsdpfx Ajyq Rz Sohzjg Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 4000 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Carriage length: 2250 mm Cutting width at rip fence: 1040 mm Cutting width at crosscut fence: 2900 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position control Saw blade tilting adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Nwedpfxoy Ai I Nj Ahzog Rip fence display: digital readout Crosscut ruler display: digital readout Crosscut ruler with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction connection: 80 and 120 mm Machine length: 2200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2022,

Condition: good (used), Year of construction: 2001, machine/vehicle number: 5562, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: scorer, MAYER PS 9 Z Horizontal Pressure Beam Saw Cutting length: 4200 mm Nodpfx Ajy Ef Htjhzjwg Max. cutting height: 95 mm Saw blade projection: 103 mm Automatic cutting height adjustment 8 clamping grippers Saw blade diameter: 355 mm Scoring saw diameter: 127 mm The cutting precision and dimensional accuracy are very good. NOTE: Several sets of saw blades (diamond and carbide-tipped) are included in the scope of delivery.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum cutting width: 4200 mm Maximum cutting length: 4200 mm Motor: 24 kW with frequency control, 1200 - 4200 rpm Circular blade diameter: 500 mm Blade overhang: 137 mm Njdpjy U E Nmofx Ahzswg Feed speed: 2 - 100 m/min, return speed approximately 120 m/min Rapid stop while in motion with automatic panel recognition or via a pre-selection switch Double pressure on the clamping beam, can be activated Sliding table 2000 x 600 mm with air cushion 3 side tables 2000 x 600 mm with air cushion and front rollers, movable via linear guides and rollers Dust extraction port: 100 x 50 mm Lateral pressure roller behind the cutting line, adjustable from 20 to 2,200 mm Control system: PC 7000