Used Slot And Pin Machine for sale (72,179)

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Gbsdpsvwfrzjfx Adbei

Condition: used, Year of construction: 2006, Machine including brand new 2-jaw chuck Machine cleaned, lubricated, partially overhauled, test run performed Drill chuck replaced. Chuck runout: 0.03 mm Used, top condition, low operating hours Make: Hofmann Model: LB 760 Gsdpfxsw Ed Uio Adbjbi Year of manufacture: 2006 Machine no.: 76-01420 CE type-examined Motor: 1.8 kW, 2 speeds Table size: 760 mm Drill capacity: 0–20 mm Drill chuck: 20 mm Dowel boring device with 4 position stops Workpiece stop Mitre stop 45° Centre stop Motor speed: 2 settings (1500/3000 rpm) Digital height display Manual workpiece clamp, 1 x with 2 columns Extraction connection: Ø 120 mm Space requirement: approx. 1300 x 1200 x 1400 mm Weight: approx. 260 kg Location: 97447 Gerolzhofen, free loaded, unpackaged Delivery in as-inspected condition, without guarantee or warranty.

Condition: used, Year of construction: 1995, with pneumatic lift for drilling on 2 levels used, excellent condition, low hours Manufacturer: Hoffmann Model: HR 150 Year of manufacture: 1995 Machine no.: 15201 CE type tested Drill chuck: 16 mm Dowel drilling device with 1 piece indexing guide Workpiece stop Gbsdpow Ed Ucofx Adboi Mitre gauge 45° Center stop Mobile Pneumatic lift Digital displays Pneumatic workpiece clamps, 2 pcs Space requirements approx. 1200 mm x 900 mm x 1300 mm Weight approx. 350 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, without guarantee or warranty

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. Gbjdpfxjyq Rkyj Adbsi The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and technical data: Gsdpfxexllwco Adbebi - Drill depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid feed system, eliminating the need for tedious cranking - Smooth and stepless movement of the drilling unit - Height adjustment with fine tuning and gas pressure cylinder for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drill depth adjustable using scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large, high-quality cast iron table with ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Drill head swivel range: -60° to +60° - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 180 mm adjustment of stroke: 100 mm no. of ram strokes: 45 / 73 / 125 Hub/min distance table/ram: 400 mm work table:: 650 x 250 mm total power requirement: 2,0 kW voltage: 380 V dimension machine xH: 1,3 x 1,0 x 1,9 m VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted on the crank disk by means of a threaded spindle. Inclined position of the ram guide with ram 10° Gjdju Ng Tnjpfx Adbebi Rotation of the drive disk per min. = 400 rpm. The machine does not comply with the legal safety requirements of the UVV (UVV = accident prevention regulations) . Sold as is, without test. *

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. Godpfx Adsu Ng T Ujbobi *

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: Godjg Uq Dfspfx Adbjbi used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: good (used), Year of construction: 1990, slotting machine complete with accessories Gjdpjykl Iyefx Adbobi

Condition: excellent (used), Habegger ( Burri / Petermann) Can & Spline Slotting Machine Gsdpfx Aewwmr Isdbsbi Swiss made

Condition: excellent (used), HOLZMANN long hole drilling machine with movable table and 32 mm indexing, table additionally tiltable. Gjdpfx Ajx Rbk Eedbsbi

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each Gbsdpfx Adsxy Styobsi - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1200 mm Weight 700 kg Gedpfx Adsv A Hydjbsbi Total power requirement 1,9 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x900x1160 mm Weight 120 kg Gbjdsvz Hk Tepfx Adbji Total power requirement 2,2 kw

Condition: ready for operation (used), STOZZATRICE BACRI 240 Gsdpfxoykmnbs Adbsbi Supplied with accessories,

Condition: used, Year of construction: 1990, Dowel hole drilling unit: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down device: manual Gbedpfx Adjx I Aikjbji Extraction port: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1994, Dowel hole drilling unit: spacing 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down clamp: manual Machine length: 1280 mm Gbsdpfx Adjx I Aiqsbsi Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Gjdsw E Tz Eepfx Adbobi Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 2018, Marel concept 500 labelling machine Gbedpfjv Sp Ebex Adbsi - top and bottom labelling machine

Condition: excellent (used), functionality: fully functional, Automatic machine for filling and sealing bags with liquid. Originally designed for aseptic filling and sealing of infusion bags. Five-nozzle filling machine. Process description: 1st station – Manual placement of the bag into the starwheel 2nd station – Cutting open the filling port; the cut-off piece is removed by vacuum into a separate container 3rd station – Start of filling 4th station – Continued filling 5th station – Continued filling 6th station – Continued filling 7th station – Finalise filling 8th station – Sealing of the filling port 9th station – Ejection of the filled bag Filling is performed using overpressure through a central feed pipe. Each filling station is equipped with SIRAI valves that close a silicone filling tube (no moving parts in contact with the liquid, which facilitates cleaning and validation). Godpfsw Ac Ebjx Adbobi Each individual filling station can be set on the control panel via timer (millisecond accuracy). Filling volume is adjustable from 100 to 3000 ml. The machine is constructed entirely from stainless steel 316, suitable for pharmaceutical production, and is mobile, mounted on wheels. The equipment is technically simple, easy to maintain, and highly compact (footprint less than 1 square metre).

Condition: used, Year of construction: 2005, devel device: Teilung 16, 22 25, 32 Gsdpfx Ajw Dd N Redbobi boring depht: 145 mm boring length: 240 mm height adjustment: 135 mm motor power: 1,5kW speed: 1500 / 3000 U/min hold down: manuell suction connection: 100 mm machine length: 1280 mm machine width: 960 mm weight: 300 kg

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, Godpfxevl Eyno Adbebi subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, Gsdpfxerxcyls Adbjbi 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Gbsdpjwd U U Dofx Adboi Location:

Condition: excellent (used), Year of construction: 2003, operating hours: 2,100 h, functionality: fully functional, machine/vehicle number: 16/20, Siemens 840 D Powerline Spindle speed: 50 rpm/6000 rpm Tool holder: SK 40 X-axis: 1300mm Y-axis: 150mm Z-axis: 150mm Gbodpjuc T Rdefx Adboi Clamping hydraulics Pendulum operation possible 8-fold tool changer Weight: approx. 2500 kg Partially overhauled, Commissioning within a radius of 200 km included in the price.