Used Slotting Machine for sale (65,180)

Year of construction: 1948, condition: used, Technical details: max. ram stroke: 180 mm adjustment of stroke: 100 mm Hnodpfxsu Ng Tno Aacsk no. of ram strokes: 45 / 73 / 125 Hub/min distance table/ram: 400 mm work table:: 650 x 250 mm total power requirement: 2,0 kW voltage: 380 V dimension machine xH: 1,3 x 1,0 x 1,9 m VERTICAL BROACHING MACHINE for the machining of keyways on flanges and/or bushes table adjustment: lengthwise=420 mm manual / 400 mm automatic, crosswise=150mm; vertical=300mm mechan. Drive The stroke is adjusted on the crank disk by means of a threaded spindle. Inclined position of the ram guide with ram 10° Rotation of the drive disk per min. = 400 rpm. The machine does not comply with the legal safety requirements of the UVV (UVV = accident prevention regulations) . Sold as is, without test. *

Year of construction: 1963, condition: used, Technical details: max. ram stroke: 150 mm workpiece diameter - max.: 250 mm slot width: 50 mm feed speed: 10 m/min. adjustment of stroke: ja mm voltage: 380 V work table:: Ø 250 mm total power requirement: 6,0 kW weight of the machine ca.: 1,05 t dimension machine xH: 1,2 x 0,8 x 1,6 m Application: For the internal grooving of flanges Drawing needle specifications: -total length = 650mm -Width = 10; 20; 30; 50mm -Drawing length = approx. 150mm Hnodju Ng T Uepfx Aacok Lubrication takes place via the drawing needles. Equipment: 4 different drawing needle guides (5; 22; 32 and 50mm) 50 different flange holders 23x drawing steel holders shank 18mm; 12x shank 22mm; 7x shank 26, 30, 40 and 45mm incl. accessories see photo i.D. *

Condition: ready for operation (used), Year of construction: 1960, machine/vehicle number: 719, Manufacturer: Hurth Model : LF 00 Machine No. : 719 Year of manufacture : ca.1960 Weight: ca. 400 KG General / technical data: used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment groove width for cutter Ø: from 2 to 10mm length of grooves in one cut: from 0 to 60mm + cutter diameter 10 depth feeds feeds: 0,03 to 0,3 mm milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4 / 34,7 / 49,5 strokes/min spindle speeds: 4 pieces 970, 1370, 1950, and 2750 rpm table dimensions (rigid table): 160mm x 355mm table height adjustment: 40mm transversal movement of the table ( against the cutter ): 110mm power supply / spindle motor power: 380Volt 50 HZ / 0,8 KW / 920 1/min approx. space requirement of the machine: 670mm x 1100mm x 1200mm (bxtxh) Hjdpfxjg Uq Dfs Aacenk Accessories / special equipment: Chip tray coolant device Machine documentation Remarks: The machine is in a condition corresponding to its age. The machine is preferably designed for production use in small and medium series. The machine has a simple crank gear adjustment to determine the length of the groove.

Condition: excellent (used), Year of construction: 2003, operating hours: 2,100 h, functionality: fully functional, machine/vehicle number: 16/20, Siemens 840 D Powerline Spindle speed: 50 rpm/6000 rpm Tool holder: SK 40 X-axis: 1300mm Y-axis: 150mm Z-axis: 150mm Clamping hydraulics Pendulum operation possible 8-fold tool changer Hsdpfxeuc T Rde Aacsnk Weight: approx. 2500 kg Partially overhauled, Commissioning within a radius of 200 km included in the price.

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Hodjvwfr Ijpfx Aaconk

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Hodpfx Ajvwf H Ejacenk

Condition: new, Transportable and flexible table machine, mills a keyway for theSwallow sizes Wction:Adjust the stops to measure and insert the workpiece. When the handle is depressed, the workpiececurious, excited. At the same time, the milling group moves to the set milling depth. The milled part will be at start-upof the handle is released again, the motor switches off automatically. Finished!Technical specifications:Electrical connection values 1ph/N/PE 230 V 50/60Hz 1.0 kWMotor 1 x 1000WIdle speed 34000 ual controlWorkpiece clamping manuallyPassage height 130 mmMilling depth 0-85 mmSuction connection Ø 50 mmSwallow size W-0/1/2/3/4Dimensions W/D/H 740/650/835Weight 32kgOrder No. W1031000 Hjdjvwf Dkspfx Aacenk

Condition: new, - NEW -Standard equipment:Motor 1.5 kWSpindle speed 2880 rpmMax. Spindle height above the table 160 mmMax. Drilling stroke 345 mmMax. Cross stroke 245 mmSpindle stroke 160 mmDrilling capacity 0-20 mmMax. Tool length 175 mmEccentric clamp 1 pcRotatable machine table 800 x 400 mm /- 45°Pivotable / rotatable drilling unit as optionTiltable machine table as optionMachine dimensions 1500x1100x950 mmMachine weight 345 kgincluded:- Suction nozzle no. P41 55- 2nd clamping eccentric no. P41 25- Dowel drilling device with 4 grid dimensions no. P41 20- Single lever operation- 2 speeds 1.5/1.9 kW 1440/2880 rpm no. P41 07- Digital display of spindle / drilling height no. P41 34 Hjdpfxovwflzo Aacenk

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Hjdpfxovwfrze Aaconk

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, CNC vertical slot milling machine Year of manufacture: 1989 Working range: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm - 4000 rpm Max. Slot length: 1200 mm Max. groove width: 40 mm Clamping surface: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant device Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, new milling spindle Commissioning within a radius of approx. 200 km included in the price Hjdpfx Asuc T S Usacenk

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) Hnodpfx Aajxy Styjcjk - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Hnedpfx Asw E Tz Ejacjk Condition: as new, only a few drillings performed Equipment and technical data: Spindle speed: 3,000 rpm Drilling width: 240 mm Max. drilling depth at 90°: 180 mm Drill head height adjustment: 160 mm Tool clamping range: 0 – 20 mm Worktable rotation: ±60° Worktable length: 565 mm Worktable width: 315 mm Extraction port diameter: 90 mm Output power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Dimensions: 1,290 × 980 × 1,270 mm Weight: 260 kg Availability: short-term Location: Saxony-Anhalt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x1200x1200 mm Weight 700 kg Total power requirement 1,9 kw Hnedpfx Aajv A Hydjcek

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 720x900x1160 mm Hodpfx Aaovz Hk Tjcsnk Weight 120 kg Total power requirement 2,2 kw

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear Hjdpfx Aswbi Rbjacjnk

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Hnjdpfx Asw Naccoacok Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Hnsdpfx Asw I Uzkeacek Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, Hsdjvl Eynjpfx Aacjnk without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, Hjdpfsrxcyljx Aacenk 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Condition: used, Year of construction: 1990, Dowel hole drilling unit: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down device: manual Extraction port: 100 mm Machine length: 1280 mm Hsdpfx Ajx I Aiksacjnk Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 1994, Dowel hole drilling unit: spacing 16, 22, 25, 32 Drilling depth: 145 mm Hodpfx Aaox I Aiqscsnk Slot length: 240 mm Height adjustment travel: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down clamp: manual Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Hnjdpfx Ajwd U U Doacsk Location:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1160x750x1080 mm Weight 260 kg Total power requirement 2,2 kw Hnjdpfxevz Hmbo Aacok

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x1150x1250 mm Weight 550 kg Total power requirement 3 kw Hedpfxjvz Evnj Aacenk

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x740x1260 mm Hnjdpfovz Hm Iox Aacsk Weight 240 kg Total power requirement 2,4 kw