Used Small Device for sale (14,312)

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier.” Manufacturer: ASO Safety Solutions Type: 41-322 (ELMON relay) Category: Safety evaluation unit / safety relay (ELMON family) Function: Evaluation of safety contact mats, safety edges and bumpers; monitoring of sensor current; support for 4-wire sensors Connections / Operation: Terminals / LED display for status; operating instructions and connection examples in the manual Protection class / Mounting: for control cabinet / inline mounting Lhedpezr Ucujfx Ah Ssn

Condition: used, Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible. Lodpfx Ahszybv Dj Sshn

Condition: excellent (used), functionality: fully functional, Hot runner system for 20 channels With cable Lsdpfxex Hi R Sj Ah Sehn After a complete inspection, fully functional PRICE REDUCED FROM 1550 TO 1000 EUR!!!

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with handheld terminal and foot pedal -Three-jaw chuck: Ø 400 mm, three-jaw chuck bore Ø 130 mm -Speed: 0-2 1/4 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Transmission: switchable 2 stages Lhjdpfxezkfr Ds Ah Sjn -Manufacturer Sawa- Gearbox Type -Translation: 1:1000, 1:2508 -Input shaft: Ø 28 mm -Output shaft: Ø 135 mm -Transport dimensions: 2070/1430/H1520 mm -Weight: 1880 kg

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame -Load capacity: kg -Control: with hand terminal, foot pedal and digital speed setting -Three-jaw chuck: Forkardt Ø 400 mm, three-jaw chuck bore Ø 140 mm -Speed: 0-1 1/3 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Base frame: without adjustable feet -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox type CUSII260/720-S -Translation: 1:6375, 1:1530 -Input shaft: Ø 30 mm -Output shaft: Ø 170 mm -Transport dimensions: 2390/1110/H1520 mm -Weight: 2700 kg Ledjzkfulepfx Ah Sohn

Condition: used, / weight 140 kg dimension Length: about 430mm Width: approx. 530mm Height: about 370mm Weight: 140kg Lodpfozcq Hlex Ah Sehn

Condition: used, Year of construction: 2007, functionality: fully functional, space requirement width: 2,300 mm, space requirement length: 3,500 mm, space requirement height: 4,200 mm, conveyor belt width: 850 mm, -WAG 916- Here, a compact shot blasting machine from the manufacturer Wheelabrator is offered for sale. The compact shot blasting machine, type MB-100, is fully functional. Operating hours: 6493.23 h Turbine power: 7.5 kW, 14.6 Amps Next inspection: 01/27 Machine control: Manual or automatic operation Feeder control: Manual or automatic operation Blast time setting: Fine adjustment between seconds, minutes, and hours Space requirement length: approx. 3500 mm Space requirement width: approx. 2300 mm Space requirement height: approx. 4200 mm Conveyor belt width: 850 mm Lhedpfx Ahszkub Ue Son The compact shot blasting machine has been completely disassembled and cannot be tested while powered on.

Condition: excellent (used), Load measuring device, overload protection Lhodpfjzk Daasx Ah Ssn -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 1.25/2.75 -Item No.: 49189444 -Individual components: see photos -Cardboard dimensions: 290/220/60 mm -Weight: 1.1 kg

Condition: used, Gulmay CP225-1/29 X-Ray Device – Radiographic Irradiation Unit Maximum Power: 3200 W kV Range: 20 – 225 kV kV Accuracy: ± 1% of set value kV Reproducibility: Better than ± 0.05 kV High Voltage Ripple: Less than 5.0 V/mA with 10M high-voltage cable mA Range: 0 – 30 mA mA Accuracy: ± 0.5% of set value mA Reproducibility: Better than 2 μA Input Voltage: 220 V ±10% 47 – 63 Hz Input Current: 27 A at 220 V Output Connector: R30 Cathode Dimensions (W x H x D): 435 x 780 x 818 mm Storage Temperature: -40°C to +70°C Operating Temperature: 0°C to +40°C Relative Humidity: 95% Duty Cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an appointment for viewing. We are happy to organize low-cost shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is available. Sale subject to prior sale. Visit our shop and see our other offerings. Lhsdpfx Ahoy Akczs Sen The stated company names and trademarks are the property of their respective owners and are used only for identification and description of the products. Deviations from technical specifications or errors in the item description may occur and are subject to change.

Condition: used, length 1020 mm width 580 mm depth 520 mm Lodpfx Ahey Sur So Sshn weight of the machine ca. 590 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 2011-60476-1, Offer 22655 Technical data: - 2 motor-driven + 2 idler units - Load capacity 20,000 kg - Roller diameter approx. 400 mm - Roller width 150 mm - Overall height 500 mm - Drive 400 V Lodpfx Aozn Rcvsh Sehn - Space requirement with drive approx. W 800 x H 500 x D 900 mm - Space requirement without drive approx. W 250 x H 500 x D 620 mm - Weight approx. 1200 kg - Without electrical control unit / control cabinet

Condition: used, Year of construction: 2000, length 800 mm width 800 mm height 1000 mm total power requirement 0 kW weight of the machine ca. 700 kg Ledoznnd Dopfx Ah Sehn dimensions of the machine ca. 800 x 800 x 1000 mm

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain Lhodpjzuyywofx Ah Son - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2001, Press brake manufactured in 2001. This IMAL SMALL 835/25 features a press force of 25 tonnes and a bending length of 835 mm. It is equipped with Delem DM51 CNC control for enhanced precision. If you are looking to get high-quality bending capabilities, consider the IMAL SMALL 835/25 machine we have for sale. Contact us for further details. • Pressing force: 25 tonnes • Bending length: 835 mm Lodpfozrw Dzex Ah Sehn • Alternative working-length indication: 830 mm

Condition: new, workpiece weight (max.): 3,000 kg, – Capacity 3 tons – Workpiece minimum Ø 70 mm – Workpiece maximum Ø 1200 mm – Roller diameter 200 mm Lhjdjwygh Iepfx Ah Sen – Stepless speed adjustment – Digital speed display – Speed 100/1050 mm/sec – Foot pedal – Emergency stop – Documentation – 230V

Condition: excellent (used), Marel Speedbatcher in lovely condition. Perfect for prawns, shellfish, small poultry portions, confectionary etc. Lhjdpfx Ahoyivqco Sen

Condition: used, Conveyor belt, belt conveyor, timing belt conveyor, small parts conveyor, flat belt conveyor, belt conveyor GEPPERT type GAL 25 Serial No. 1009078 Year of manufacture: 2010 Ljdpfx Ahox R Ehze Sohn Usable length: 700 mm Belt width: 60 mm Belt length: 1520 mm Frame profile height: 50 mm Return roller diameter: 50 / 26 mm Belt speed: 26 m/min Motor power: 0.09 kW Power supply: 400 Volt, 50 Hz - Driven by geared motor with chain - Height-adjustable stand from 660 to 1000 mm belt height - Conveyor belt inclination adjustable Overall dimensions (L x W x H): 750 x 400 x 660 mm Weight: 21 kg Very good condition

Year of construction: 2018, condition: like new (used), PlateExakt 600 - Cliché mounting device/die-cutting cylinder  Age: 1992 Lsdpfx Ahel Ax Uwo Sjhn  Mounting device  cliché mounting device which is exclusively designed to, the cliché or the die-cutting plate onto the impression or die-cutting cylinder safely, precisely and quickly cylinder. The device has two high-resolution USB cameras that can be moved linearly on a precision guide. precision guide. Synchronised via the centre and individually adjustable by means of a handwheel for different printing widths.  Max. diam.: 227”  Min. diam.: 60”  Width: 620mm

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Lodpouprqwjfx Ah Sjhn Connection to 400A 32A Used, functional condition

Condition: used, Year of construction: 1996, used good condition cleaned function tested Manufacturer: Höcker Polytechnik Type: Vacumobil EA 160 A Year of manufacture: 1996 Machine no.: 931014 GS dust tested CE type tested Clean air unit Underpressure Filter cleaning, automatic Filter cleaning, manual-motorized Ljdpfx Ahoz D Iuxj Sohn Connection diameter mm: 160 Motor kW: 3.0 Pressure Pa: 2580 Air flow m³/h: 1447 Weight approx. kg: 250 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: ready for operation (used), Hommel Opticline Contour 414 Wave Measuring Instrument, Measuring Device, Wave Measuring Machine Max. measuring diameter: 140 mm Max. measuring length: 300 mm Resolution: 0.1 µm Measuring accuracy (diameter): (1.0 + D/200) µm Measuring accuracy (length): (2.6 + L/200) µm Repeatability (diameter): 0.3 µm Measuring speed: automatic, 10–80 mm/s Positioning speed: up to 200 mm/s Rotational speed: 1 rotation/s Description has been copied. You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and see our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved. Lodpfxozz Huuo Ah Sohn

Condition: used, Year of construction: 2008, Universal filling machine, Fritsch, model UFG-EPA-08RHG-NL20 Lhodpfx Ahsz A Saij Son Year of manufacture: 2008

Year of construction: 2012, condition: good (used), Unit comes complete with suction lift Maximum load capacity: 150 kg Width: 650 mm Height: 2000 mm Depth: 1100 mm Weight: approx. 25 kg Lsdpfxezmyrds Ah Sohn Condition: good, second-hand

Condition: excellent (used), Load measuring device, overload protection Lhedpfx Aszlxb Ieh Sen -Manufacturer: Demag, Load measuring device, overload protection, original packaging -Type: MGS 0.63/2.20 -Item No.: 49169244 -Individual components: see photos -Cardboard dimensions: 285/220/60 mm -Weight: 1.1 kg

Condition: ready for operation (used), Assfalg ASO 650 S Edge Milling Machine, Chamfering Machine, Deburring Machine Maximum chamfer width: 0-7mm Angle adjustment: 15°-45° Dimensions: approx. 400 × 500 × 300 mm Weight: approx. 52 kg Radius [mm]: 1.2 | 2 | 2.5 | 3 | 4 | 6 You are welcome to visit us for an inspection. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. Lhodpfx Aozy E D Soh Sjn For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.