Used Soldering for sale (105)

Year of construction: 2017, condition: used, functionality: unexamined, SMT reflow oven Condition as follows: - Transport OK - Needs cleaning - Basic functionality OK - Forced cooling not tested - Seals should be replaced and a new lambda probe is required Immediately available Podpfx Ajxbp Nbjh Usha

Condition: like new (used), Year of construction: 2022, Ex demo unit. Like new condition. Ask for additional details! Pedpew Dtgrofx Ah Uoha

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Line for the production of multi-layer sandwich panels (SIP, PVC) as a complete set, according to the Requerement Specification manufafactured. Podpfx Ahjxpv Sxo Usha

Condition: like new (used), Year of construction: 2022, Machine like new condition. Ex demo machine. Phodpfx Ahow Dr Tqs Uja Ask for additional information!

Condition: used, Year of construction: 2011, Operational condition machine. Phedpfx Ahjwzr Ags Uja Two pots. Variable Z system. One lead free (SAC 305) and one leaded (Sn63Pb37). If needed, the inner pot can also be made lead free with additional cost. Can be bought with nitrogen generator. Ask for additional details!

Condition: used, Year of construction: 2008, Machine in operational condition, however due to its age, sold without warranty. Pedpfx Ahswnfbvs Ueha Ask for additional details!

Condition: used, Year of construction: 2023, 2 systems available, one 2019 and 2023. Ask for additional information! Pedswcrdtjpfx Ah Uoha

Condition: used, Year of construction: 2006, -Spray fluxer Phsdswcf Raepfx Ah Uea -2x medium-wave preheating cassettes -1x dynamic preheater -1x bottom convection preheater -Dual wave with chip pre-nozzle + ERSA Power Wave - Cooling unit at the outfeed -Synchronous code reading system upstream of the soldering system -Roller buffer at the outfeed -Motor-driven infeed conveyor with chain Ask for additional information.

Year of construction: 2009, condition: not inspected (used), Reflow oven in operational condition. R to L configuration with SMEMA. Ask for additional information! Pedsvfp Nmjpfx Ah Ueha

Condition: used, Year of construction: 2013, Segment: Fluxer Storage space for flux canister under the fluxer Alcohol-based flux Segment: Preheating Medium-wave heating from below, convection from above Segment: Pre-warming 8 quartz radiators, controllable in groups of 4 Segment: Preheating + Divided Solder Pot Long-wave heating plate Solder nozzle with leaded solder, 1st section Solder pot with lead-free solder, 2nd section (out of operation) Availability in end of Q2 2025. Phjdpsv Sy Aksfx Ah Usa Ask for additinal information!

Condition: used, Soldering station, soldering iron, chip solder, soldering system, desoldering station -Manufacturer: Weller, desoldering station type WDD 81V -Voltage: 230/24 V -Operating pressure: 4-6 bar -Dimensions: 190/120/H110mm -Weight: 2.3 kg Pedpfx Ajtu Rk Eeh Ueha

Condition: good (used), Welding smoke filter, welding smoke extraction, soldering smoke extraction, mobile filter unit, welding smoke extractor Phjdpfstvb Dxsx Ah Uoa -Manufacturer: Kemper, mobile welding fume extraction -Drive: 1.1 kW -Volume flow: 1000 m³/h -Extraction arm: Ø 150 mm x 3260 mm -Machine dimensions: 710/655/H1400 mm -Weight: 130 kg

Condition: used, Year of construction: 2021, Serial number: hcmdeq50j0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20012 Specifications: 2021 model 1100 hours (doesn't matter) 42.2 kW 8730 kg Machine width: 232 cm Additional hydraulics Central lubrication Track steering Engcon proportional tiltrotator Undercarriage in good condition Phodpov U S Tysfx Ah Usa Multi-X coupling on hydraulics Webasto Taillight rig on the solder Sanding tray Tiltrotator with clamp Air conditioning Radio Toolbox Ready for delivery Description:We have a 2021 Hitachi ZX85US-6 tiltrotator excavator with grapple and sanding bucket for sale.According to the owner, According to the owner, it was taken out 6 months ago in 2022. According to the owner, everything works as it should. The machine has few hours.Service is carried out by the owner.The machine is ready for delivery. Own weight: 8730 Model: zx85us-6 gravemaskin m/ rototilt med klype og pusseskuffe

Condition: good (used), Year of construction: 2012, Gerber conversion software Easy-to-use software package with touch screen operation SPC Plus software Measurement: insufficient, excessive, or missing solder paste Phjdpox H Ryuofx Ah Uja bridging paste deformations volume, height XY positions shadow-free measurement via dual-path projections 4 MPix high-speed camera, 20µm XY resolution, 0.37µm Z resolution approx. 60cm²/sec inspection speed Z-axis tracking SPC-Plus software package Max. PCB size: 510x510mm automatic width adjustment SMEMA interface Transport height 950 +/- 50mm QR code recognition 2D detection of bridges and smearing

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) Phedpfx Ahjn Armas Uoa (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2022, condition: ready for operation (used), A Mechatronika pick-and-place machine is available. Placement capacity: 1500/h, max. PCB dimensions X/Y: 300mm/400mm, component range: 0402 to 30mm/30mm, min. connection pitch: 0.5mm. Tape feeders: 8mm/12mm/16mm/24mm/32mm/44mm, max. number of 8mm tape feeders: 32, bar feeders: SO4 to PLCC84, component centering: optical (vision). Tool changer: 8, resolution X/Y: 5µm, angle resolution: 0.045°/step. Machine dimensions X/Y/Z without feeder: approx. 750mm/830mm/550mm, machine dimensions X/Y/Z with all attachments: 1700mm/1000mm/550mm, weight without feeder: approx. 70kg, operating hours: approx. 300h. Including base frame, computer unit, monitor, accessories and VS dosing unit for the fully automatic, program-controlled application of solder paste or adhesive from cartridges (5cm³/10cm³). Documentation available. On-site inspection is possible. Pjdpfxju Af Abj Ah Uoha

Condition: used, Year of construction: 2015, Vitronics Soltec myReflow 7038 SMD reflow soldering oven Year of construction 2015 Pin length: 5 mm Pin spacing: 19 mm 10 heating zones Phedouhfm Uopfx Ah Usa 4 cooling zones N2 pressure: 6 bar LP width: 50 mm - 508 mm Max. component height: 40 mm / 30 mm (top / bottom) Transport height: 832 - 914 mm Width adjustment: electrical Software version: 4.0.6.b

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors -Manufacturer: Kemper, mobile welding fume extraction -Drive: 0.75 kW Phjdpjx I Aknsfx Ah Uea -Volume flow rate: ³/h -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 3x welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Year of construction: 2021, condition: used, Serial number: mz20210422xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21665 Specifications: 2021 model Weight: 1011 kg S60 attachment Ready for delivery Description: We have a 2021 Hardlife 100-SC-NL Hydraulic Solder Bucket w/ S60 Attachment for sale. Everything works as it should and the drawer has been used little according to the owner. Ready for delivery Phedpfxoxq Dmmo Ah Uja Own weight: 1011 Model: 100-SC-NL hydraulisk soldeskuffe m/ S60 feste

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Phsdpjxzrflsfx Ah Uja Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed

Year of construction: 2017, condition: used, functionality: fully functional, Manual SMT stencil printer for solder paste for stencils 520 x 520 mm Quick clamping system: SPGEN-SP004-ML (520 x 520 mm) Pedpfx Ahex Ea Nas Ujha

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h Phedpfjx Hvqfex Ah Usa -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Year of construction: 2014, condition: good (used), EKRA Stencil Printer Serio 4000 Year of manufacture: 2014 Print format: min. 80x50 mm, max. 510x510 mm Substrate thickness: 0.2 to 6 mm Phedpfsxxk Eljx Ah Uja Stencil size: min. 450x450 mm, max. 800x900 mm Repeat accuracy: +/-12.5 µm IQUESS steel squeegee 2 1/2 D inspection Adjustable transport width iPAG jet dispenser (with heating) Solder paste dispenser for cup diameter 53 mm, 57 mm, and 64 mm Paste level control EKRA Material Storage System S10 Select Year of manufacture: 2018 Consumables such as solder paste and adhesives can be stored according to product requirements and production options Traceability Temperature control (4-12°C) 8 shelves Material dispensing via lift system Handheld scanner

Condition: good (used), Year of construction: 1992, mobile welding smoke filter, welding smoke extraction, soldering smoke extraction -Drive: 1.6 kW Pedpfx Aeb A Sbmjh Usha -Connection: 220 V 50 Hz -Weight: 46 kg

Condition: good (used), Clamp welding machine, foil welding machine -Connection: 220 V -Working width: 300 mm Phsdpfx Ahjb A Sm Do Uja -Weight: 10 kg