Used Soldering for sale (98)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: Iodpfx Acjzlx E Tofsti MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Year of construction: 2024, condition: used, Make: AJAX TOCCO, Model: 23-13295, Year of manufacture: 2024, Serial no.: 23-13295, Connected load: 48 kVA, Converter output: 38 kW, Output frequency: 10,000 - 40,000 Hz, PLC system control with operator panel touch, 4 soldering stations, Cooling unit by Hyfra, type Sigma 18-S-RF-P, 2 extraction hoods, control/electrical cabinets, safety devices, 2 load carrier trolleys made from aluminum profile system, inspection table, mobile, 2,500 x 700 mm, 3 tiers, perforated metal wall, skylight, magnifier lamp, label printer by CAB, type EOS1, barcode scanner MDE by Zebra, type Omnii XT15 Iodoyx Etyopfx Acfjti

Year of construction: 2017, operating hours: 800 h, condition: like new (used), functionality: fully functional, working width: 250 mm, For sale is a very compact and flexible twin-wave soldering machine, type ATF 13/25, from the German quality manufacturer ATF Automatisierungstechnik GmbH (Collenberg). Solder quantity: approx. 120 kg, filled with Felder SN100Ni+ Very compact soldering machine, can be operated in an office environment. The machine does not require a compressed air connection or explosion protection. Ideal for small-series production. Footprint without infeed and outfeed: 1600x850 mm Year of manufacture: 2017 Connection value: 400V/25A, 14 KW Weight: 190 kg (without solder) Solder quantity: approx. 120 kg, filled with Felder SN100Ni+ Process width: 250mm, maximum PCB size: 470 x 250 mm. With extended infeed and outfeed (770mm each) Itodpfx Acozku Rcsfsi Accessories: 4 extended soldering frames with center supports 7 solder bars of 400 g each, SN100Ni+ 1 other hand tools (hydrometer, spoon, spatula, etc.) The machine was only operated sporadically, approximately 6 times a year for half a day. Therefore, it is in like-new condition. Since the machine was only used with one soldering wave, the second solder pump is still unused and included in its original delivery condition. Self-dismantling and collection only! No shipping possible.

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Itsdpfx Acozmap Aofei Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Year of construction: 2005, condition: ready for operation (used), A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible. Itsdpfx Acezka I Hsfji

Year of construction: 2017, condition: ready for operation (used), A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible. Itsdpfjzidkvsx Acfei

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Ijdpfx Acezghf Eofeti

Year of construction: 2010, condition: used, Operational unit! Ijdpfx Ajzl Ardocfsti

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW Itsdpfx Aceu Rwauofji - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure Isdpfju Rnd Dsx Acfoti - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Year of construction: 2014, condition: ready for operation (used), Working condition unit! Comes with infeed and outfeed conveyor systems and full of alloy. Machine still under operation and to be released in Q3 2026. Ask for additional details! Isdezcardjpfx Acfoti

Condition: used, Year of manufacture: 2001 In very good condition Itedpshc T Irsfx Acfsi Additional images available

Year of construction: 2022, condition: used, Frame is from 2012 and machine fully rebuilt in 2022 by ERSA OEM. Itsdpfxjy Uihto Acfoi 1x fluxing module 1 drop jet flux head 180µm 3x preheating modules bottom IR lamps and top side convection 2x solder modules multi wave (dip modules) one standard size and one XL with electromagnetic solder pump No traceability system installed New conveyors retrofitted with heavy load chain system Ask for the full overview of the rebuild and its condition!

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Itjdpfxov Ta Hlj Acfsi Spray fluxer Dynamic preheating at the bottom Convection heating

Year of construction: 1970, condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm Width: 200 mm Depth: 40 mm Itedpfeb Nxf Tox Acfei Solder capacity: 16 kg Power consumption: 2400 W For mains voltage: 220 V

Year of construction: 2018, condition: ready for operation (used), functionality: fully functional, Wave soldering system with comprehensive equipment! A spare parts package worth approximately €20,000 is included in the sale and delivery! The system comprises the following components: - Seho wave soldering system MWS 2340-F - Fluxer SelectFlux - Streamline transport system including lifts TECHNICAL DETAILS - PULSAR preheating: 2 convection and 5 pulsar preheating zones (3,300 mm length) Iodpoyt Nlbsfx Acfoti - Wetting length (soldering system): 40 mm + 30 mm - Return transport level: raised 405 mm - Finger conveyor: L-shape, short (3 mm) MACHINE DETAILS - Number of processed solder frames: 1,060,540 pcs EQUIPMENT - Fluxer SelectFlux - Streamline transport system incl. lifts - Automatic solder bar feeder - Process gas cleaning system - Finger cleaning unit - Foldable convection top heater - Fan speed monitoring for convection preheating - Standard soldering unit - Wide solder nozzle unit, 7-row - Solder frame transport system incl. 2 lifts - Cooling tunnel in the return transport of the soldering system incl. timer control - Solder frame lowering station - Replacement filter for condensate trap at machine infeed and outfeed - Residual oxygen measurement with lambda probe - Nitrogen economizing circuit - Transponder system for automatic switching of soldering programs - Selective flux module (external unit) - Flow sensor for flux per spray head - Flux reservoir tank with connections - Replacement filters for external spray fluxer module – upper and lower machine sections - Spare PC

Condition: ready for operation (used), machine/vehicle number: Sn96,5Ag3,0Cu0,5, functionality: unexamined, Felder Sn96.5Ag3.0Cu0.5 lead-free solder wire, 0.5 mm ! Sold only in lots of 10 pieces ! Manufacturer: Felder Model/Alloy: Sn96.5Ag3.0Cu0.5 Net weight: ~0.25 kg Itjdpfsynhtasx Acfoi

Condition: used, functionality: unexamined, machine/vehicle number: V250 (Bofa) | WLA250 (Weidinger), input voltage: 230 V, Used solder fume extraction units from Bofa & Weidinger Model: V250 (Bofa) | WLA250 (Weidinger) Itedpsxp H Ttefx Acfsi Voltage: 230V (50Hz) | 1.1A Including power cable.

Condition: used, Year of construction: 2009, Offered here is a soldering robot from ATN Berlin. This is the "Vario" model. Component feeding is realized via exchangeable cassettes. The soldering process uses induction, making it a contactless soldering method. Itedpfx Ajy Slkfocfsi

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Itsdpfxjy Skq Re Acfsi

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Ersa Hotflow 3/20 Year of manufacture: 04/2011 Refurbished in 2024 Dimensions: Length: 6,265 mm Width: 1,201 mm Height: 1,375 mm Iodpfx Acoyf N Uyjfeti Weight approx. 1,900 kg Conveyor System: Working width: 45–516 mm, automatically and steplessly adjustable Clearance height: +35/-37 mm Center support, automatically and steplessly adjustable Conveyor speed: 20–200 cm/min Pin chain conveyor available with 3 / 4 / 5 mm pin length options Process Zone: Process length: 4,840 mm Heated length: 3,725 mm Cooling length: 1,115 mm Heating System: Up to 20 convection heating cassettes (Preheating zone up to 14 cassettes, reflow zone 6 cassettes) Airflow per module adjustable up to 500 m³/h Nominal power per module: 3.3 kW Nominal power last module: 4.5 kW Cooling: Up to 2-level cooling zone (ambient air) Electrical Data: 400 V, 3 phases, N, PE, 50/60 Hz Continuous operating power: approx. 12–16 kW Exhaust: Extraction capacity: Chimney at system inlet 300 m³/h; chimney at system outlet 400 m³/h, both with monitoring function

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Nitrogen hood IR preheating Single soldering nozzle Iedjxzrfljpfx Acfjti 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed

Year of construction: 2017, condition: excellent (used), Storage location: 2727 Manufacturer: ESTA Year of manufacture: 2017 Type: KAF 100 Serial number: 16002366 Itjdslt Uinspfx Acfji Volume flow: 700 m³/h Max. negative pressure: 1,100 Pa Connection diameter: 50 mm Features: mobile Accessories: see image, including laboratory extraction arm Connection: 0.55 kW, 230 V Weight: 42 kg Dimensions: 485 x 485 x 920 mm (without hose)

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm - Wave spring Iodjg Sfdlopfx Acfsti - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Condition: used, Year of construction: 2023, functionality: fully functional, ERSA VERSAFLOW 4/55 2Mdolue S021B-23A0548D, used, 2023, price: €190,000 (conveyor not included) Specifications available on request. Itsdjx Tgvlspfx Acfsi