Used Sound Engineering for sale (20,516)

Condition: good (used), Full Onion Peeling Line, Comprising of- -Onion Peeler, manufactured by M&P Engineering MP 16584, The Large Onion Peeling Machine from M&P Engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance -Dolav Tipper -Elevated Conveyor -Roller Table Ledpezzpu Dsfx Ah Sshn -Onion Washer

Condition: used, Year of construction: 2021, A PUR foaming system with Yaskawa industrial robot is offered. Min. dispensing rate: approx. 0.15g/s, max. dispensing rate: 1.6g/s, material system: polyurethane Penguin Foam 3151/3157, drum capacity: 200l, operating voltage: 3 × 400V/N/PE, frequency: 50Hz, control voltage: 24V DC, upstream fuse: 16A. Approx. 30000 assemblies were foam-applied using the system. The system was shut down in 2024 according to the manufacturers instructions. Documentation available. An on-site inspection is possible. Ljdezvy Ecspfx Ah Sjhn

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Used AT ENGINEERING model AT 1100 stainless steel paddle mixer with all accessories. Ljdpfx Aozlxy Rsh Sshn - Manufacturer: AT ENGINEERING - Model: AT 1100 - Material: Stainless steel AISI 304 - Capacity: 330 - 770 litre working capacity, 1100 litre total capacity (product dependent) - Mixing Chamber: approximately 1740 mm long x 950 mm diameter - Discharge Type: Pneumatically operated bomb door type discharge valve - Type of blades: Stainless steel shaft with paddle blades - Motor: 37 kW, 1485 rpm, 50 Hz electrical motor with gearbox, final rpm 130 rpm Includes: - Stainless steel containers for filling or discharging material. - Screw conveyor for moving the mixed material from container into the filler. - Powder filling machine - Stainless steel switchboard with integrated control panel - Stainless steel platform

Condition: new, Year of construction: 2025, Product description: A safety device for the secure and efficient feeding of workpieces on various types of woodworking machines. Increases safety – the operator does not need to hold their hands close to the tool Lodpfx Aoz Tbv Aeh Sshn Improves the quality of the finish, thanks to a constant and uniform feed rate The feed rate can be easily adjusted to suit any specific work requirement Easy adjustment for different sizes of workpiece Features: 4 fixed speeds: 4-8-11-22 m/min 3 rollers (diameter x thickness): 120x60 mm Motor power: 1 HP / 0.75 kW - 1400/2800 rpm Steel gear housing Environmentally friendly, rust-resistant powder-coated finish Manufactured in accordance with CE standards High-quality end products – the 3-roller model is an ideal solution for feeding strips and components of medium or small size. Thanks to two feed rollers and a third output roller, the workpiece is constantly and uniformly fed throughout the entire work process, which significantly improves the quality of the end products. Quick setup – the speed switch enables quick setting of the 1st and 2nd feed speeds and a quick change of the feed direction back and forth; changing the internal gears provides 4 speeds. Perfect grip – 50-Shore wheels made of patented "Feeder Grip" rubber ensure the longest service life and the highest grip on the workpiece. Safety as a core value – the mechanical feed increases safety because it feeds the workpiece close to the tool while the operator's hands are at a safe distance. Its effectiveness depends on specific design and production criteria. Maggi feeders are the only ones designed and manufactured in Italy and comply with EU safety standards. Universal stand (optional) – for easy positioning and adjustment of the feeding unit on the machine. It is easy to attach, stable and robust: the foot, cross member, tube, joint and flange are made of cast iron, and the two columns are made of rectified steel with a considerable thickness. Handles made of steel and adjustment wheels allow for quick and precise positioning. High adaptability – the suspension of a 20mm diameter roller, with calibrated gears, allows for stable and uniform feeding of workpieces of different thicknesses without additional adjustments. Safety brushes – additional protection on both sides of the feed. Safe stand – equipped with safety devices (SPS - System) to prevent accidental detachment, complying with EC safety standards. Standard equipment: Aluminum casting housing and steel gear housing 1 HP motor with 3m cable "Feeder Grip" 50-Shore rubber wheels Packaging: recyclable cardboard

Condition: used, functionality: fully functional, The manufacturer cannot be identified with 100% certainty as there is no nameplate on the entire machine. The machine is located in 06502 Thale. Lhedpfxszr Edpo Ah Sjn Machine type: Drum melting system for 200-liter containers Material transport: Motor-driven pump Lifting system: Pneumatic Melting system: Heated pressure/melting plate with two rotating seals Control: Separate control cabinet A detailed description/documentation of the drum melting system can be found in the appendix.

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles Ledpfxezk N S Ue Ah Sjhn - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd GIC Gainsborough Engineering VFB2000 vertical form-fill-seal (VFFS) bagging machine, designed for automated weighing/bagging and packing of food products and other free-flowing products. Specification: Lhsdpfxozzzfuj Ah Sjn Manufacturer: Gainsborough Engineering Ltd Brand: GIC Model: VFB2000 Type: Vertical Form-Fill-Seal (VFFS) bagging machine Sealing bars: 290 mm horizontal × 320 mm vertical Film reel width: 620 mm Current film width: 280 mm Forming tube: 80 mm diameter Suitable for integration with weighing/feed systems Stainless steel/food-processing construction Designed for continuous automatic bag forming, filling and sealing

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Lhedozzp Azspfx Ah Son Manufacturer - Gainsborough Engineering Ltd

Condition: excellent (used), Year of construction: 2009, operating hours: 3,350 h, functionality: fully functional, total length: 21,000 mm, total width: 1,200 mm, total height: 3,250 mm, type of input current: three-phase, input voltage: 380 V, feed rate X-axis: 12 m/min, working width: 270 mm, We are selling our fully automated packaging line by CSP Engineering due to production expansion and renewal of our machinery park. The packaging line is engineered for maximum output, precision and reliability in industrial production environments. The line is currently functional in production. Main features - Automatic counting system - Automatic label application with package quantity indication - Integrated folder insert system inside each package - Automatic wrapping and strapping system - Integrated measuring system - High production efficiency: up to 150 m2 per hour - Suitable for long profiles Technical specifications - Maximum plank length: 3100mm - Maximum plank width: 270mm - Widest point of the complete line: 3100mm Machine configuration and power requirements 1. Strapex system - 5.6 AMP 2. Parscan System - 10 AMP 3. Packaging Machine - 6 AMP 4. Oven - 40 AMP 5. Destacker - 25 AMP The line can be inspected in operation and is immediately available upon agreement. Lodpfx Asy Rffteh Sshn Keywords: Labeling, Destacking, Stacking, Strapping, Packaging, Packing, Parquet, Wood, Wrapping, Folder, Shrinking, Shrinkoven

Condition: used, mileage: 40,000 km, power: 198 kW (269.20 HP), color: black, gearing type: automatic, Equipment: ABS, airbag, central locking, power assisted steering, seat heater, - Passenger airbag - Electric windows - left - Electric windows - right - Driver airbag Lhjdezmcrtjpfx Ah Ssn - To ensure you receive the best possible advice, we kindly request that you schedule an appointment. Mr. J. Ebert will be happy to assist you. OBSIDIAN BLACK METALLIC PAINT, AMG STYLING, FRONT SPOILER, SIDE SKIRTS, FABRIC/LEATHER/MICROFIBER, BLACK/ANTHRACITE, TRIM ELEMENT WOOD OAK GRAY OPEN-PORED (2B35), AMG LINE EXTERIOR / AMG SPORT PACKAGE EXTERIOR, AMG LINE EXTERIOR / AMG SPORT PACKAGE EXTERIOR, MIRROR PACKAGE, NIGHT PACKAGE, MEMORY PACKAGE FRONT, DRIVING PACKAGE, INTERIOR CHROME PACKAGE, INTERIOR LIGHT PACKAGE, MEMORY PACKAGE (DRIVER SEAT, STEERING COLUMN AND MIRRORS), SMARTPHONE INTEGRATION PACKAGE, SMARTPHONE INTEGRATION CARPLAY, SMARTPHONE INTEGRATION ANDROID AUTO, ADAPTIVE DAMPING SYSTEM PLUS (ADS+), AIRMATIC DC / SEMI-ACTIVE AIR SUSPENSION, ACTIVE ADJUSTABLE DAMPING "NORMALLY OPEN", AUTOMATIC HIGH BEAM SWITCHING PLUS (IHC+), EXTENDED RESTART FUNCTION IN STOP-AND-GO TRAFFIC, ROUTE-BASED SPEED ADJUSTMENT, PREMIUM SOUND SYSTEM, HEADLIGHTS LED DYNAMIC LEFT-HAND TRAFFIC, REARVIEW CAMERA, PANORAMIC SLIDING ROOF/GLASS ROOF, TOWING HITCH, INCREASED TOWING CAPACITY (TOWING PREPARATION), DISTANCE REGULATING TEMPOMAT PLUS (DISTRONIC PLUS), DISTRONIC PLUS LATERAL SUPPORT (DTR+Q), ACTIVE PARKING ASSISTANT, DRIVER'S SEAT LEFT ELECTRICALLY ADJUSTABLE WITH MEMORY, INTERIOR AND EXTERIOR MIRRORS AUTOMATICALLY DIMMING, SIDEBAG IN THE REAR LEFT AND RIGHT, GPS ANTENNA, TELEPHONE ANTENNA, EXIT WARNING SYSTEM ASSISTANT, KNEE AIRBAG, TEMPERED CUPHOLDERS, ECALL EMERGENCY CALL SYSTEM (HERMES), HARD DISK NAVIGATION, EXTERIOR MIRRORS LEFT AND RIGHT FOLDABLE, TRAFFIC SIGN RECOGNITION, ROOF INNER LINING FABRIC BLACK, DIGITAL RADIO STANDARD DAB (DIGI. AUDIO BROADCAST), AUTOMATIC SPEED CONTROL, CLIMATE CONTROL, LOGO PROJECTION ON MIRROR, GLASS DARK TINTED, SEAT HEATING REAR SEAT LEFT AND RIGHT, SEAT HEATING DRIVER'S SEAT LEFT AND RIGHT, AQUABLADE INCLUDING HEATED WINDSHIELD WASHER SYSTEM, KEYLESS-GO, AUTOMATIC REAR DOOR, WIRELESS TELEPHONE CHARGING FRONT AND ANTENNA, PARKING ASSISTANT WITH LATERAL FUNCTION (UN R79), ADJUSTMENT OF STEERING WHEEL CONTROLS FOR ASSISTANCE SYSTEMS, I-SIZE MARKING (ISOFIX SUCCESSOR), FUEL TANK WITH LARGER CAPACITY, AMG SPOKE WHEELS 21" MIXED TIRES, SUPERSPORT STEERING WHEEL LEATHER DEEP-EMBOSSED, REAR SEAT BELT STATUS DISPLAY, PASSENGER SEAT WITH WEIGHT RECOGNITION, AUGMENTED REALITY VIDEO, LUMBAR SUPPORT ADJUSTMENT, ENHANCED BRAKE SYSTEM, DISPLACEMENT 2.0 LITERS, R4-DIESEL ENGINE OM654 1st Hand (German Vehicle), We will gladly provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Errors and prior sale reserved. Metallic, Sunroof, Electric immobilizer, ESP, Navigation system, Service booklet filled, Particle filter, Warranty, Rain sensor, Panoramic roof, Sports seats, Electric side mirrors, Sport package, Bluetooth, On-board computer, Electric seat adjustment, Hands-free device, Multifunction steering wheel, Isofix, Light sensor, Traction control, Non-smoker vehicle, Start/stop system, Lane keeping assistant, Emergency brake assist, Keyless central locking, Alarm system, Electric tailgate, Leather steering wheel, Lumbar support, Fatigue warning system, Emergency call system, Tire pressure control, Shift paddles, Seat heating rear, Sound system.

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed ​​1400 rpm Lhjdpod H Dr Sjfx Ah Sjn Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

Condition: used, pure engineering Type: pureGMC18 System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and meets the regulatory requirements of environmental authorities. All necessary climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Ljdjzd Ukiepfx Ah Sjhn Dew point mirror (optional) Vibration-isolated granite for low-vibration mounting of an ultra-microbalance Ionization device against static charging Flow protection for shielding the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with power outlets, grounding bolt Advantages: Meets regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation: pureGMC18 Temperature: 22°C ± 1 K Humidity: 45% RH ± 3% Dimensions W/D/H: 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply: 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Lsdpfx Aoynzg Hoh Sjhn Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Ljdey Hdqajpfx Ah Sjhn Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: good (used), Icon Engineering Steriliser tunnel Stainless, cold water steriliser tunnel, stainless chain belt, belt dimensions 1800mm x 360mm, max product height 250mm, variable speed, with recirculation pump, air knife, 3Ph Lhodezzf E Espfx Ah Sjn

Condition: used, Primus Engineering Type: DST 350 Lhedpfx Ajzgbtijh Sen This test setup was designed for performing IP protection tests for “dust” according to, for example, DIN 40050 Part 9 and DIN EN 60529. The test setup is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Pre-programmed test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing IP protection tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Type : Cutter / Laminator Lodpsy Dvpvofx Ah Sehn Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée Lhsdpfoy D Ugysx Ah Sjn - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. Lhjdpfezdu Hqex Ah Sen The original new price was over €20,000.

Year of construction: 1998, operating hours: 6,000 h, condition: excellent (used), functionality: fully functional, Complete Technological Line for tomato paste production - 3-stage vacuum evaporators Professional industrial plant for the concentration of tomato juice and fruit juices. Manufactured by the experienced Bulgarian manufacturer Thermohran Engineering, this system is designed for high-quality production, preserving the organoleptic characteristics of the product through low-temperature vacuum evaporation. Technical Specifications: Manufacturer: Thermohran Engineering Ltd. (Bulgaria) Year of Construction: 1998 Material: High-grade Stainless Steel (Inox) System Type: 3-stage Vacuum Evaporator Components Included: * Main Evaporation Columns II.5. GENERAL LAYOUT DATA OF THE COMPLETE LINE Capacity (processed tomatoes) t/24h 150 Product capacity 28-30 oBrix kg/h 1 000 Steam consumption kg/h 4 000 Tap water consumption m3/h 10 Sealing water consumption m3/h 0.7 Lhjdpfszfx Dvsx Ah Ssn Electrical consumption kW/h 147 Water consumption t = 18 oC m3/h 78 t = 28 oC m3/h 195 Air consumption at P= 4 bar nm3/h 7 Mounting area m 6x40x6m (in the area of the evaporating installation the height must be 13 m) Complete Control Panel (Brix meter) Pumping Station (centrifugal pumps) External Cooling Tower / Heat Exchanger unit Applications: Enrichment of tomato juice (Double and Triple Concentrate). Fruit juice concentration.

Condition: used, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Year of manufacture: 2018 Colour: Grey Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lhedpfjyf Hc Iex Ah Sjn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Catalog number 8048 TECHNICAL DATA Lhsdpszx Sqpefx Ah Ssn - max. disc diameter 400mm - disc bore diameter 30mm - disc guard - cutting height 100mm - max. cutting width 640mm - possibility of angled cutting in the vertical plane - arm adjustment or disc adjustment - arm rotation capability: right/left - motor 400V, 3kW - table dimensions 1600x950mm - dust extraction nozzle diameter 60, 100mm - dimensions (L/W/H) 1500x1600x1500mm - weight 240kg ADVANTAGES – Made in Italy – Unpainted – DTR documentation included – Very good condition – Used saw Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2021, Available in OEM version without manufacturer markings on the housing, or with markings. Price per unit; 15 units in stock (including OEM version – 13 units in stock). The Opto Engineering TC23144 is a professional bi-telecentric lens designed for use in machine vision systems, metrology, and precision measurement applications. Its bi-telecentric design ensures a constant magnification regardless of the object distance, minimizing perspective errors and image distortion. This makes the TC23144 model ideal for quality control systems, dimensional measurements, and automated industrial inspection. The lens is compatible with cameras equipped with sensors up to 2/3″ and offers a magnification of 0.061x and a C-mount. It is characterized by very high telecentricity, low distortion, and a large depth of field, which allows for repeatable and accurate measurement results, even in demanding industrial environments. Applications: - Machine vision systems, - Quality control and production inspection, - Industrial metrology, - Dimensional measurements, - Industrial automation, - Research and development (R&D) laboratories. Key parameters: Manufacturer: Opto Engineering Model: TC23144 Type: Bi-telecentric lens Maximum sensor size: 2/3″ Magnification: 0.061x Mount: C-Mount Working distance: 396 mm Working aperture: f/8 Telecentricity: < 0.05° Distortion: < 0.04% Front diameter: 200 mm Lhjdpfx Ahszi S Ivo Sjn Weight: approx. 5.8 kg The device was used in applications related to vision systems and industrial measurements. If you have any questions or need further information, please send a message or contact us by phone.

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 Lhedpfx Aex Rcqgoh Sjn - Center distance 32 mm.

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Ledjx Anq Hepfx Ah Sohn Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.