Used Sourdough Plant for sale (2,909)

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,000 mm, total width: 2,100 mm, power: 3 kW (4.08 HP), compressed air connection: 6.5 bar, volume flow: 6 m³/h, Open spray stand 2x2.1x2.2 The overspray during powdering is collected via the suction unit. The powder spray stand is supplied on castors and is therefore mobile. - The suction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. Iijdpfx Agjfhv Tqj Neh 1 Dimensions of the powder stand Width 2,000 mm Depth 2,100 mm Height 2,200 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x600 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter Iisdpfx Agoxd T Hce Nsh - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2025, DGUV certified until: 11/2026, Model: Liftomat for transferring dough divider to an intermediate proofer (RuLa) mobile on a frame robust technology Iijdpfxor Enkgj Ag Neh DGUV V3 tested exclusively by us Connection: 400V, 16A CEE plug Refurbished and SAB-tested used machine with warranty and service Option: Maintenance contract Delivery service Visit our large bakery machines exhibition!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, 1 Used Concrete Batching Plant In excellent condition! Manufacturer: EUROMECC Model: EURO 5 MIX Isdpfx Aexn A Nbjg Neih Year of manufacture: 2019 Theoretical capacity: approx. 60–75 m³/h Total production to date: approx. 95,000 m³ Aggregate storage in high silo / inline silo (reihensilo) • Capacity: 5 bins – each 45 m³ • 4 load cells (each 5,000 kg capacity) • Silo loading via feed conveyor belt • Truck feed via loading hopper (25 m³ volume) Complete plant with winter enclosure / insulation Mixers • 1x Planetary mixers with agitators • Type EUROMECC MEP 3000/2000 Dosing system • Aggregates: Weighing belt • Water dosing: 1 water scale 500 kg per scale • Admixture dosing: 1 admixture scale 2x12 liters • Cement dosing: 1 cement scale 1,000 kg per scale Control system • Operator/control container included • Main control system: ElettronData Cement silos – total: 6 units • 2x 150 m³ (Diameter: 4.6 m) • 1x 90 m³ (Diameter: 3.5 m) • 1x 45 m³ (Diameter: 3.5 m) Optional equipment: • Warm air heating system inside container • Chemical admixture storage in container • Rest concrete recycling system (optional) Condition: • The plant is in very good and fully functional condition. • AVAILABLE IMMEDIATELY • Location: Denmark • Price: on request Note: Offer is net ex-works, subject to prior sale. Errors, omissions, and/or misrepresentations excepted. No warranty or guarantee. Sold “as-is”, lying or standing. Any duplication, publication or reuse of this offer – in part or whole – is strictly prohibited.

Condition: excellent (used), The plant consists of: 2 pcs. hot wall double-bottom hood furnace Loading: movable hoods Volume: ø1.800 x 2.500 mm Workpiece weight (max.): 4.000 kg Wall temperature (max.): 550°C Connected load (total): 325 kW Iijdjuvikuepfx Ag Nsh 4 batch stations 1 cleaning system

Condition: used, Year of construction: 1990, power: 5 kW (6.80 HP), Field of application: Mining Iijdpfx Agovlzwpo Noh Manufacturer: Fryma Model: MSM-18 Year : 1990   Type : Ball mill type Co-Ball Application: fine grinding of suspensions and highly viscous products. Grinding chamber volume: 1.1 litres Internal overpressure: 2.5 bars Jacketed: 2 bars Motor power: 5.5 kW   Capacity: 20 – 80 l/h depending on product.   Examples: food: chocolate coatings / fillings cosmetics: lipsticks, pigment pastes pharmaceutical: additives chemical: lacquering for pigments, paints and ceramics.

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Complete Plant with Chemical Pretreatment (7 Stages) for GSB Certification (QUALICOAT) (Suitable for Multimetal) All dimensions and further modifications can be taken into account during design and planning. The offer includes the following components: - Pretreatment cabin incl. reverse osmosis unit - Walk-in coating booth - Powder spray gun - Powder curing oven - Dryer - Manual conveyor system - Lifting-lowering station - Electrical control system Details: 1. Walk-in cleaning cabin, pretreatment for steel and aluminum The cleaning cabin is designed for automatic cleaning. Medium pressure spraying can be applied. The cabin contains 7 different spray tanks. Maximum part size: L = 6000 mm, W = 2000 mm, H = 2300 mm. 1. Cabin dimensions - Length: 6,500 mm - Width: 3,000 mm Isdpfxeffv Tpo Ag Nsih - Height: 3,600 mm 2. Total pretreatment dimensions - Length: 6,600 mm - Width: 4,640 mm - Height: 4,300 mm Process Stages: 1st Stage: Degreasing/Neutral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 2nd Stage: Acidic Mineral Pickle - Heated tank, 50-55°C, time = 3-6 minutes, drip-off time = 80 seconds 3rd Stage: Rinse 1 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 1 minute 4th Stage: Rinse 2 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 5th Stage: Rinse 3 - Rinsing with ambient temperature, time = 0.75-1.5 minutes, drip-off time = 45 seconds 6th Stage: Nano-Ceramic - Processed at ambient temperature, time = 0.75-1.5 minutes, drip-off time = 60 seconds 7th Stage: Overhead spray ring for post-rinsing after Stage 6 - Rinsing with ambient temperature, time = 1 minute, drip-off time = 60 seconds 8th Stage: Passivation, no-rinse for aluminum - Rinsing with ambient temperature, time = 2-3 minutes, drip-off time = 1-2 minutes 1.1. Reverse Osmosis Unit - Reverse osmosis system, 250 liters/hour 1.2. Oil Skimmer - Tank no. 1 is equipped with an oil skimmer "UniSkim-21-100". Construction: The spraying system is two-part and movable, and can be shifted up to 500 mm via a pneumatic sliding system. Return to the tanks is also mobile via a pneumatic sliding system with 7 positions in order to serve the 7 tanks. 2. Walk-in coating booth 1. Booth dimensions - Length: 7,400 mm - Width: 4,000 mm - Height: 3,236 mm 2. Booth dimensions incl. extraction system - Length: 8,552 mm - Width: 6,232 mm - Height: 4,393 mm The booth features 2 single-side pneumatic doors for entry/exit of workpieces, and an additional side door for the coater. 3. Powder Coating Equipment Wagner, Manual System "Sprint 2 B" 4. Powder Curing Oven - Internal dimensions: - Length: 6,500 mm - Width: 2,200 mm - Height: 3,416 mm 5. Dryer - Internal dimensions: - Length: 6,500 mm - Width: 1,200 mm - Height: 3,416 mm 6. Manual Conveyor System The conveyor system consists of: The conveyor system is designed for a crossbar weight of 700 kg. The carriage can carry a maximum of 2,000 kg on 3 rails.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Iisdpfx Aexdwiujg Nsh Additional E-pump for operation when engine is shut down

Condition: used, functionality: fully functional, input voltage: 400 V, Werner & Pfleiderer Iiodpfxju T Aace Ag Neh WP Model: Multimatic MUC 5 5-row Weight approx. 35 to 85 grams Pressing pressure adjustable Belt flour duster Interchangeable chamber drums Connection: 400V, 16A CEE plug Used machine, not cleaned More bakery machines in stock!

Condition: used, Year of construction: 1995, operating hours: 2,612 h, Since 1972, your reliable partner for all matters concerning automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles available, including vans, commercial vehicles, and construction machinery! We continuously offer you attractive financing options at special reduced rates. If you are interested, we are happy to prepare an individual offer for you! Trade-ins of your commercial vehicle or construction machinery are welcome. If you require a new TÜV inspection, we will gladly provide you with an offer from one of our partner workshops. Our offers generally do NOT include a new TÜV inspection unless otherwise specified. Iedpfov Nt Eyjx Ag Neih Delivery of your "new" commercial vehicle is possible through our external partners at an additional cost. The information provided in advertisements, online, on price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability or guarantee for typographical or data transmission errors. Listed features should be verified separately as needed. Subject to errors and prior sale.

Condition: good (used), functionality: fully functional, power: 110 kW (149.56 HP), machine/vehicle number: B-01526-120, for sale as parts or as a complete installation feed hopper conveyor belt Iiodpfx Agoxhgywe Neh Andrin eddy-current separator extraction control cabinet etc.

Year of construction: 2018, condition: ready for operation (used), A complete welding system with a robot and peripheral equipment is available. Welding stations: 2, robot travel path: 11000mm, max. workpiece diameter left/right: 2200mm, max. workpiece length left: 4000mm, workpiece length range right: 1000mm-5000mm, welding process: TIG, materials: aluminum/stainless steel, shielding gas: argon, overall system dimensions X/Y/Z: approx. 15350mm/5700mm/4000mm, control unit: Qirox QC2 Advanced. Including suction technology. Documentation available. An on-site inspection is possible. Iiodpjxnz Upofx Ag Neh

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Powder coating booth open spray booth Dimensions of the powder booth Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 fan 6000 m³/h Power 3 kW (electric motor) Filter 4 pcs. type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 pcs. 1" "Turbo" Italy Absolute filter 1 pcs. pocket filter type Wagner "Prima Sprint" powder gun Mains standard 230 VAC Frequency 50 - 60 Hz Inlet compressed air 6-8 bar Outlet compressed air 0.05 - 5.5 Nm³/hour Powder combustion furnace Iisdpeb Dxnwefx Ag Noh Internal dimensions length 3,225 mm Internal width 1,400 mm Internal height 2,000 mm Insulation Rock wool 150 mm [75 kg/m³] Temperature Max. 220°C Fans 1 unit 4,500 m³/h Electric motors 1 pc. 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal output 39 kW Doors on both sides 2 manual, insulated with rock wool 150mm 70Kg/m³ Indirect heating via thermoblock, Heating chamber Tubular heat exchanger Burner* 1 electric heater Steel support for fastening conveyor technology IPE 80 *Choice of gas, oil or hybrid for an extra charge Manual conveyor technology Substructure Steel profiles IPE and SQ Bends 9040C 90 degrees, radius 600 mm 4 pcs. Rail system no. 9040 27m Roller units 9842 GLRHT 16 pcs. Connectors 9041 M 12 pcs. Fixing clamps 9047/100 16 pcs. Manual tongue switch 45 degrees 9401 AIYM 2 pcs. Load carrier L = 1000 mm 8 pcs.

Condition: good (used), Year of construction: 1994, Type: 2SQ4000/1800 Screening area: 1,800 x 4,000 mm new steel construction with platform and motor frame new discharge trough and discharge chutes Iisdpfxetpguhs Ag Neh

Condition: good (used), Wastewater treatment plant, drilling water treatment, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in the pictures, conveyor belt filter/agitator Iiodpfxsb A Ngpe Ag Njh -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Condition: used, Year of construction: 2019, operating hours: 4,943 h, functionality: fully functional, Shredder Willibald EP 5500 Manufacturer: Willibald Model: EP 5500 Shark II Year of manufacture (according to nameplate): 2019 Operating hours (read off): 4,943 Base machine – Shark II – 32 – 2-axle drawbar chassis, MAN engine 520 hp, Stage IV, flail set 32er with tungsten carbide, rubber belt; neodymium magnet; hydraulic, extended 4.5 m, steel motor hood, standard; central lubrication with pump; EP 5500 hydraulic support leg; extended feed hopper, hydraulically foldable; standard paintwork; cross-diagonal shredding flaps; standard hydraulic oil; 24V road lighting system as per StVO – EP 5500 decals & documentation – language: German; hydraulic quick-change hub system 32er; radio remote control; crawl drive; towing eye 50 mm; special equipment – 3-part basket screening system – compressed air hose – special decals; cross-diagonal shredding insert, welded; compressed air hose package for tools. Various spare parts Net purchase price plus statutory VAT. VAT will be shown separately on our invoice. Subject to change, errors, and prior sale. Sale is without warranty or guarantee and only to businesses. Iedpew Imy Eefx Ag Noih Enquiries will be processed Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 2018, operating hours: 3,297 h, functionality: unexamined, Basic system equipment features: Feed belt: • Highly wear-resistant, forged special chain • Feed belt width: 1,700 mm • Feed belt length: 4,700 mm Iodpfxoxc Ibfo Ag Njih Hydraulic unit: • Feed roller and feed belt each driven separately with their own drive and gearbox. The feed belt and feed roller speeds are infinitely adjustable. Overload protection via speed monitoring and reversing mechanism. • Hydraulic tank capacity: 220 liters. Feed: • The feed roller is hydraulically driven, mounted in a pendulum bearing, and guided by two rack bars. • Feed opening: approx. 660 mm height x 1,700 mm width. Hammermill: • 46 hammers, hammer width: 80 mm • Individual hammer tips replaceable • Hammermill width: 1,700 mm • Rotor diameter: 999 mm • Rotor speed: 1,000 rpm Engine: • SCANIA turbo diesel engine, output of 478 kW, complying with the applicable Euro emission standard Drive: • Direct drive via 8 V-belts Hopper dimensions: • Hopper opening length: 4,800 mm • Hopper opening width: 2,400 mm Throughput capacity: • 200–300 m³/h or more, depending on material

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Exero Mounted Screening Unit: Width: 1830 mm Iijdpfx Ajxghbaeg Njh Weight: 500 kg equipped with hydraulic fan: Type EX 8 (Year of manufacture 2019) Width: 140 mm Weight: 22 kg

Condition: new, Year of construction: 2025, functionality: fully functional, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, 1. powder coating booth, open spray booth The overspray during powder coating is collected by the suction unit. The powder spray booth is supplied on castors and is therefore mobile. - The extraction unit is equipped with a 60 l powder container (rollbar). - There are 4 filters in the extraction unit as the 1st stage. - The absolute filter is located above the booth. Iisdpoffwfxsfx Ag Neh 1 Dimensions of the powder level Width 2,450 mm Depth 2,350 mm Height 2,700 mm 2 fans 1 pc. 6,000 m³/h Electric motor 3.0 kW 3 Filter Ø 325x800 [mm] 4 pcs. type filter cartridges 4 Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5 Absolute filter 1 pc. type pocket filter 2. powder combustion furnace 1 Internal dimension length 4,000 mm 2 Inner dimension width 1,500 mm 3 Internal height 2,200 mm 4 External dimension incl. thermoblock length 5,250 mm 5 External dimension incl. thermoblock width 2,050 mm 6 External dimension incl. thermoblock height 2,530/2,750 mm 3. switch cabinet 4 Manual conveyor system The "Mantion system" conveyor technology is designed for max. 250 kg per product carrier and 750 kg/ trolley.

Condition: excellent (used), Year of construction: 2007, operating hours: 3,500 h, functionality: fully functional, overall weight: 22,250 kg, power: 429 kW (583.28 HP), Machine on hooklift frame with towing device - former demonstration unit with only approx. 3500 operating hours Isdpfx Agew I A Rme Nsih

Condition: excellent (used), functionality: fully functional, power: 88 kW (119.65 HP), fuel tank capacity: 399 l, color: green, overall weight: 32,700 kg, Year of construction: 2019, operating hours: 2,351 h, Screen drive speed: 1130 to 950 rpm Transport dimensions: 15,300 x 2,900 x 3,400 mm (LxWxH) Screening area lower deck: 4,575 x 1,525 mm Screen box adjustment: 16° to 20° Design: two-deck screening system Iodpfx Asvzahlog Neih Screening area upper deck: 4,880 x 1,525 mm Diesel tank capacity: 399 liters Engine manufacturer / type / power: Cat / C4.4 / 88 kW Belt width / medium grain / fine grain belt: 900 mm Feeder belt width: 1,400 mm Weight: 32,700 kg Hydraulic oil capacity: 630 liters

Condition: new, Year of construction: 2025, Powder coating system for large parts All dimensions and other changes can be taken into account in the design and planning The offer includes the following components: Cabin for chemical pretreatment (3 zones) with spray ring Walk-in coating cabin Powder gun Powder firing oven Manual conveyor system Electrical control Example: (all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Walk-in cleaning cabin including automatic spray ring 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm height 4,200 mm Walk-in coating booth, manual coating 1 Dimensions of booth length 9,000 mm width 4,500 mm height 3,400 mm 2 Dimensions of booth including extraction length 10,125 mm width 4,500 mm height 3,400 mm powder firing oven 1 Internal dimensions length 6,500 mm 2 Internal dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 External dimensions including thermoblock length 7,600 mm 5 External dimensions including thermoblock width 2,800 mm 6 External dimensions including thermoblock height 3,100 mm Manual conveyor system The conveyor system consists of made of: 1. Support structure, consisting of steel elements, 120x120m/ IPE 160 2. Rollers - No. 9862 GL 4 pieces Iiodpfxjbhh Aws Ag Neh 3. Pneumatic accessories for locking - unlocking during transfer 4. Rail system - No. 9060 - 234 meters 5. Rollers - No. 9862 GLHT 24 pieces 6. Connecting pieces - No. 9061M 34 pieces 7. Fastening clamps - No. 9067/180 234 pieces 8. Stoppers - No. 9169 21 pieces 9. Movable locking - No. 9601 VM 6 pieces 10. Rigid locking - No. 9601 VF 17 pieces Electrical control The electrical control unit is divided into electrical and automatic control. With it we can control all the units mentioned above and consists of: - PLC - Touch screen 5" color -easy view- - Modem - Thermo-magnetic switch. Fuse (Telemechanique, Siemens, ABB). - Cables, supports, pipes, etc.

Condition: excellent (used), functionality: fully functional, power: 56 kW (76.14 HP), fuel type: diesel, operation weight: 18,000 kg, Year of construction: 2021, operating hours: 350 h, Feed hopper volume: 5 m³ Operating position dimensions: 11,444 x 10,576 mm (LxW) Engine type / power: Catertpillar 4.4 / 56 kW Screen box: 3,660 x 1,280 mm (LxW) Weight: 18,000 kg Throughput: approx. 400 t/h Isdporh E Evefx Ag Neih

Condition: new, Year of construction: 2025, 1. Powder Curing Oven 1,500 x 1,200 x 1,750 mm 1. Powder Curing Oven 1,500 x 1,200 x 1,750 mm 1 Internal dimensions Length 1,500 mm 2 Internal dimensions Width 1,200 mm 3 Internal dimensions Height 1,750 mm 4 External dimensions incl. heat exchanger Length 2,250 mm 5 External dimensions incl. heat exchanger Width 1,815 mm 6 External dimensions incl. heat exchanger Height 2,006 mm, 2,296 mm incl. exhaust duct 7 Base frame 1 set Steel profile 8 Walls 1 set Double-sided galvanized sheet metal 1 mm, exterior RAL Iiodpfxsfhxd Uj Ag Noh 9 Wall/ceiling insulation 1 set Rock wool 150 mm, base insulated with 50 mm 10 Floor Oven equipped with 2 loading rails for trolleys 11 Operating temperature 220°C 12 Fans 1 pcs. 2,600 m³/h 13 Electric motors 1 pcs. 1.1 kW, 1450 rpm, 3-phase, 50 Hz 14 Thermal output 14 kW 15 Hinged doors, one side 2 pcs Insulated with 100 mm rock wool Heating Indirect via heat exchanger (thermoblock) Thermoblock 1 set Stainless steel INOX AISI 316, electric heating, heat-resistant fans and bearings, thermoblock equipped with overheat protection 16 Burner 1 pcs. Oven is electrically heated 1 Exhaust 1 pcs. Fitting for exhaust duct, manual damper control 2. Powder Coating Booth -KG DUO-01- The overspray during coating is extracted by the suction unit. The workpieces are suspended from a hook inside the booth. - The extraction system is equipped with a 30 L powder container (mobile). - First stage: 2 filters in extraction unit. - Second stage: High-pressure fan in extraction unit. 1 Powder booth dimensions Width 1,200 mm Depth 1,100 mm Height 2,380 mm 2 Fan 1 pcs. 2,500 m³/h, 1,500 Pa Electric motor 1.1 kW, B5, P2, 380 V 3 Filter ⌀ 325x600 mm 2 pcs. Type: Filter cartridges 4 Electromagnetic valves 1 pcs. 1” “Turbo” Italy 5 Lighting 1 pcs. 2x18 Watt = 36 Watt 3. Wagner Powder Coating System – Prima Sprint – 1 Prima Sprint dimensions Depth 725 mm Width 480 mm Height 1,100 mm Weight Approx. 39 kg Power supply Standard 230 VAC Frequency 50–60 Hz Input compressed air 6–8 bar Output compressed air 0.05–5.5 Nm³/h • Corona manual gun PEM-C4 Ergo • EPG-Sprint control unit • Feed unit with fluidizing crown ST 550/10 • Powder injector PI-F1 • Equipment trolley with vibrating table

Condition: good (used), functionality: fully functional, color: blue, overall weight: 23,000 kg, Year of construction: 2021, operating hours: 1,900 h, Transport weight: 23000 kg Engine: Cat diesel engine 75 kW Transport dimensions: 12775 x 2500 x 3200 mm (LxWxH) Belt width / length oversize grain: 1200 x 4600 mm (WxL) Screen box design: double-deck vibrating screen Belt width length fine grain: 800 x 680 mm (WxL) Ijdpfxovzqdde Ag Noih Belt width / length medium grain: 800 x 7600 mm (WxL) Screen box size upper deck / lower deck: 1370 x 3660 / 1370 x 3455 mm (WxL) Max. feed size: 400 mm Feeder volume: 3 m³ Throughput up to: 300 t/h