Used Spit 352 for sale (1,324)

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine Nwedpsfg Rlcjfx Ah Usr with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: new, Motor power 1,1/2,2 kW belt opening 130 mm belt dimensions 350x32x2,5 weight 220 kg Speed 30/60 1/min. Cutting surface 0° 115 / 100 / 130x80 Cutting surface 45° right 100 / 85 / 90x80 Cutting surface 45° left 75 / 75 / 90x65 Cutting surface 60° right Cutting surface 60° left Description Manual crosscut saw for miter cuts from 45° right to 45° left, with high sawing power. Construction in sturdy cast iron, practical and safe for every cut. FALCON 352 is available in bench version or on stand (accessories). The machine is equipped with a two-speed - three-phase motor. On request, the machine is supplied with pneumatic vice (FALCON 352 MA, when the head is lowered, the vice closes automatically) This version is always supplied with stand. Basic equipment: clutch adjustable from the outside Blocking device with vice Sliding on prismatic guide with adjustable bar Fixed clamping of the vice with axial adjustment for clamping the workpiece in the immediate vicinity of the cutting line. Adjustable fixing of the degasser, made entirely of steel. Electric 48 V coolant pump for cooling and lubrication of the saw blade. Double spring for the return of the to fix the loading platform. The machine can be lifted. Endless worm shaft mounted on pair of bearings. Saw blade holding shaft mounted on off-center punch. 2 speeds 30 and 60 rpm. Vise opening 130 mm Machine is supplied without saw blade. Electrical equipment: Electrical control panel marked cable connections main safety switch provided for padlock Emergency stop device Phase failure protection Speed changeover switch Thermal magnetic protection Undervoltage release Motor with IP 54 protection Nsdpfocgrkysx Ah Uewr Low voltage system 24 Volt Electric coolant pump 48 V Motor 1,1/2,2 kW - 400 Volt For further technical data please refer to the attached PDF document.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO Nwodpfoxdr Rtex Ah Ujr - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 P, manual The UK 352 P semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple miter angle adjustment. The UK 352 P has an infinitely adjustable miter range Nwedeidunvspfx Ah Uor left up to 45° and right up to 0° The saw feed takes place automatically at the touch of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. Connections for a chip extraction system are available on this machine. equipment manual guiding of the saw blade Double miter 30° - 90° - 0°, large support plate, powerful drive motor Clear control panel Two vertical pneumatic clamping cylinders Fixed material positioning jaw, can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area minimum lubrication system Air gun to clean the machine Saw blade ø 350 mm workflow 1) Setting the cutting angle 2) Loading the material 3) Bring the clamping cylinder up to 20 mm of material 4) Pneumatic clamping of the material 5) Press the start button to start the saw blade 6) the saw cut must be carried out manually with a hand lever 7) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034612, Technical characteristics: Core Specifications Bar Diameter (Round): 6 mm – 50 mm Bar Diameter (Hexagonal): 6 mm – 45 mm Bar Diameter (Square): 6 mm – 37 mm Bar Length Options: 1200 mm – 3200 mm Maximum Feed Speed: 30 m/min Maximum Remnant Length: 300 mm Required Air Pressure: 6.5 – 7.5 bar Operating Voltage: 230V / 50 Hz Weight: 1200 kg Design & Features Guide Channel: Manually interchangeable, made of Vulkollan-type plastic, suitable for high-speed bar rotation. Front Steady Block: Interchangeable every 5 mm for optimal bar support. Remnant Management: Rear extraction via self-centering extractor or front ejection available. Repositioning System: An optional rail system enables axial or radial displacement up to 600 mm for lathe servicing. Automation: Fully PLC-controlled, equipped with a brushless motor and digital pneumatic valves for speed and thrust control. Bar Storage: Single-level magazine with a 235 mm loading capacity. Nwodpfexx Sfajx Ah Usr Bar Feeder: TOP Automazione Model FU 352 SX SEMI-AUTOMATIC BAR FEEDER FOR HORIZONTAL LOADING TO LATHE (AUTONOMY DEPENDS ON BAR DIAMETER) Dimensions Bar Feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: DIGITAL HMI CONTROLLER FOR MANUAL OPERATIONS Machine Status: OPERATING

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 352 NC EVO, Semi-automatic circular saw for sawing aluminum and light metal alloys, using carbide-tipped circular saw blades. Includes dust extraction and material handling (roller conveyors). Nwodpfsv T U Tgjx Ah Uer Machine for miter cuts from 45° right to 45° left. The vertical alignment allows for sawing operations with the head tilted between 0° and 45° left.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15+30+45+90 U/min total power requirement 1,8/2,5 kW weight of the machine ca. 0,38 t Nwsdsfgpdljpfx Ah Usr dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Manual vertical circular saw for miter cuts from 60° left to 45° right.

Condition: new, MEP TIGER 352 NC 5.0 [Fully automatic] Article number TI352NC motor power 3,0 kW belt opening 190 mm belt dimensions 350x32x2,5 weight 680 kg Speed 15 - 90 m/min. Cutting surface 0° 115 / 95 / 180x95 Cutting surface 45° right 110 / 95 / 125x95 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Electro-pneumatic, vertical, linearly guided automatic saw for the use of HSS saw blades to make serial cuts from 60° left to 45° right on steel. Nsdpfxochhhds Ah Uowr The machine also works in semi-automatic cycle. CNC automatic machine with multiprocessor and two axes controlled by MEP control, latest generation, which allows to program 1000 different cutting programs, each with different cutting length and number of pieces, for the same material thickness. FEATURES: -New centralized control panel on articulated arm to allow operators to easily reach the emergency stop switch from any working position. -NEW: Fieldbus communication system (Modbus protocol) with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: + saw band speed + number of cuts programmed and executed + saw band thickness + feed length + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -NEW: Display and recording of the alarm and error messages with the possibility of displaying the incidents that have occurred. -NEW:

Condition: new, Year of construction: 2025, CAT345/349/350/352 General Purpose Bucket from stock Nedpowy Dnxofx Ah Uewr

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Nwsdpfx Ahegwt Rvj Usr

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: BF17034613, Technical characteristics: Core Specifications: - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max. Feed Speed: 30 m/min Nedoxx Sclepfx Ah Ujwr - Max. Remnant Length: 300 mm - Required Air Pressure: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features: - Guide Channel: Manually interchangeable, made from Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Rear extraction with self-centering extractor or front ejection. - Repositioning System: Optional rail allows axial or radial displacement up to 600 mm for lathe access. - Automation: Fully PLC controlled, with brushless motor and digital pneumatic valves for speed and thrust control. - Bar Storage: Single-level magazine, 235 mm capacity. Bar feeder details: TOP Automazione model: FU 352 Semi-automatic Bar Feeder for Horizontal Loading to Lathe (Autonomy depends on bar diameter) Dimensions: Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1200 kg Main Features and Capabilities: - Digital HMI controller for manual operations Machine status: - In working condition

Condition: new, MEP COBRA 352 SX evo [Semi-automatic] Article number CB352SX motor power 1,5/2,2 kW Nwjdjchkv Ijpfx Ah Usr belt opening 180 mm belt dimensions 350x32x3,4 Weight 285 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel. Basic equipment: -Machine for miter cuts from 45° right to 45° left. -Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left. -* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors. -CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens. -New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred. Electrical equipment: -New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal. -Saw blade stroke programmable directly from the control panel, to adapt to the cutting material. -Ball bearing mounted rotary table to ensure easy and accurate rotation. -Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts. -Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left. -Swarf extractor with preparation for OPTIONAL extraction system. -Automatic saw blade lubrication system, operating only at the start of the cut. -Machine is supplied without saw blade. -Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil. -Tool and instruction manual with spare parts list. For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling Nwedpfx Ahjgwt Rye Ujr • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: BF15063530, Technical Characteristics: Core Specifications - Bar Diameter (Round): 6 mm – 50 mm - Bar Diameter (Hexagonal): 6 mm – 45 mm - Bar Diameter (Square): 6 mm – 37 mm - Bar Length Options: 1200 mm – 3200 mm - Max Feed Speed: 30 m/min - Max Remnant Length: 300 mm - Air Pressure Required: 6.5 – 7.5 bar - Operating Voltage: 230V / 50 Hz - Weight: 1200 kg Design & Features - Guide Channel: Manually interchangeable, made of Vulkollan-type plastic for high-speed bar rotation. - Front Steady Block: Interchangeable every 5 mm for optimal bar support. - Remnant Management: Offers rear extraction via self-centering extractor or front ejection. - Repositioning System: Optional rail system allows axial or radial displacement up to 600 mm for lathe servicing. - Automation: Fully PLC controlled with brushless motor and digital pneumatic valves for speed and thrust regulation. - Bar Storage: Single-level magazine with a 235 mm load capacity. Bar Feeder: TOP Automazione Model: FU 352 Nodpfx Ahjxx R Nqj Uewr - Dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1200 kg Main Features and Capabilities: - HMI digital controller for manual operations. Machine Status: WORKING - Set of guide channels and accessories for bar clamping worn - Set of bearings for pusher head worn

Condition: new, MEP COBRA 352 NC 5.0 [Fully automatic] Article number CB352NC 5.0 motor power 2,6/3,5 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 600 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Nodpfjchkwhsx Ah Ujwr Cutting surface 60° right Cutting surface 60° left Description Automatic cross-cut saw with semi-automatic function for sawing aluminium and light alloys. Mitre cuts from 45° right to 45° left and saw head can be tilted 0°-45° to the left. It is controlled by multi-microprocessors, while two NC controlled axes allow to program 1000 different cutting programs, each with a different number of pieces and length, for the same material. -New centralized control panel on an articulated arm, so that the machine can be easily operated from any working position and the emergency stop button can be pressed at any time. -Fieldbus communication system with double microprocessor and serial port. -Display with 20 characters x 4 lines for displaying the following technical parameters: Number of cuts programmed and executed, saw band thickness, feed length, cutting time, ammeter, display of over 100 diagnostic messages and warnings. -New - Display and recording of alarm and error messages with the possibility of displaying the incidents that have occurred. New - Material feed of 600 mm with cutting motor and recirculating ball screw mounted on opposite ball bearings.

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Equipment - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees - incl. 2 pneumatic clamping vices (vertical) - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! Nwodogwt Rropfx Ah Uer It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, MEP COBRA 352 MA Article number CB352MA motor power 2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 weight 210 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Manual circular saw for sawing aluminium, mitre cuts from 45° right to 45° left and saw head can be tilted 0°to 45° to the left. On the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. Basic equipment: -Roller bearing mounted rotary table for fast and precise mitre adjustment. -screw lock to lock the saw head in any angular position -Automatic saw blade lubrication -Clamping system consisting of two vices -Saw head locking in the upper position -Adjustable length stop for cuts of the same length -Vice opening 180 mm -incl. tools and operating instructions Electrical equipment: -control panel -marked cable connections -indicator light for operational readiness -Main safety switch -emergency stop button -speed changeover switch -thermal magnetic protection -Undervoltage release -Switch handle Protection class IP 55 Nodpfx Ajchku Sjh Ujwr -low voltage system 24 Volt -Motor 1,5/2,2 kW - 400 Volt For further technical data, please refer to the attached PDF document.

Condition: new, Year of construction: 2024, Aluminum circular saw UK 352 M, manual The UK 352 M manual circular saw is an "upcut" machine and is mainly used for individual cuts in aluminium, copper profiles and hard plastics (requires solid material). The The machine is characterized by easy handling and fast, convenient changing of the material and simple adjustment of the miter angle. The UK 352 M has a stepless adjustable miter range left up to 45° and right up to 0°. The saw feed is manual via a hand lever, the material is clamped manually. equipment Double miter 45° - 90° - 0°, large support plate, powerful drive motor Clear control panel A manual clamping cylinder Fixed material feed jaw can be moved backwards to increase cutting capacity large protective hood, covers the entire work area Saw blade ø 350 mm Nwedeidunnopfx Ah Uor workflow 1) Setting the cutting angle 2) Loading the material 3) manual clamping of the material 4) Press the start button to start the saw blade 5) the saw cut must be carried out manually with a hand lever 6) after the end of the cut, the machine is switched off! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, axle configuration: 3 axles, first registration: 11/2002, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2002, Axle configuration Tyre size: 385/65 R22.5 Axle brand: ROR Brakes: Disc brakes Rear axle 1: Tyre tread left: 3 mm; Tyre tread right: 3 mm; Suspension: Air suspension Rear axle 2: Tyre tread left: 5 mm; Tyre tread right: 5 mm Rear axle 3: Tyre tread left: 5 mm; Tyre tread right: 7 mm; Suspension: Air suspension Weights Unladen weight: 4,680 kg Payload: 33,320 kg Gross vehicle weight: 38,000 kg Nsdpfx Aox Nyi Rjh Uewr Condition Damages: none

Condition: used, maximum load weight: 24,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space volume: 39 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Silo superstructure for free-flowing materials, approx. 39 cbm capacity, operating pressure 2.0 bar, operating temperature: -40/80°C, 2 chambers, 2 x manhole covers, bottom valves, central rear discharge, 4 x hose boxes, connection for pneumatic discharge, loading pressure gauge, walkway with pneumatically folding safety railing on tank, central lubrication system, side underrun protection, JOST landing gear, 1 x storage box, ABS, BPW EcoPlus axle(s), 3rd axle - steering axle, disc brake system, aluminum rims, air suspension with lift/lowering function. Vehicle may be covered with advertising stickers and/or decals. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with an offer from our partner workshops! Vehicle may bear advertising stickers and/or decals. Our general terms and conditions of delivery and payment apply. Nwodpfx Ajw Ak Hgoh Usr We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, weight 1 kg Nwsdel Idr Nepfx Ah Uer taper MK 4 different center points. price per piece.

Condition: good (used), axle configuration: 3 axles, first registration: 09/2014, loading space volume: 39 m³, total length: 10,200 mm, total width: 2,550 mm, suspension: air, wheelbase: 7,450 mm, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - Central lubrication = Notes = 3 compartments, fabric filter steering axle lift axle, aluminum rims = Further Information = Axle configuration Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 10,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 2: Max. axle load: 10,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear axle 3: Max. axle load: 10,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Njdpjxykitjfx Ah Uowr Weights Unladen weight: 6,560 kg Payload: 38,440 kg Gross vehicle weight: 45,000 kg Functional Body manufacturer: Spitzer Number of compartments: 3 Hoses: Yes Condition Technical condition: good Visual condition: good Further information Please contact Andre, Henri, or Andre for more information.

Condition: used, axle configuration: 3 axles, first registration: 10/2014, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2014, Axle configuration Tyre size: 385/65 R22.5 Axle make: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: tyre tread left: 6 mm; tyre tread right: 6 mm Rear axle 2: tyre tread left: 8 mm; tyre tread right: 7 mm Rear axle 3: tyre tread left: 6 mm; tyre tread right: 7 mm Weights Unladen weight: 6,040 kg Payload: 31,960 kg Gross vehicle weight: 38,000 kg Condition Nwsdpfxsx Aaqro Ah Ujr Damages: none

Condition: used, maximum load weight: 34,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2003, loading space volume: 37 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Silo body for bulk materials, total capacity 37,000 liters, 1 compartment(s), 3 manhole covers, 2 bottom valves, central discharge, connection for pneumatic unloading, hose box, catwalk with mechanically foldable railing on tank, ABS, EBS, "ROR" axle(s), disc brake system, air suspension, ALCOA aluminum rims. Vehicle may be covered with advertisements and/or lettering. Our offer does not generally include new TÜV approval. If new TÜV inspection is required, we are happy to provide an offer from our partner workshops! Vehicle may be covered with advertisements and/or lettering. Our general terms and conditions of delivery and payment apply. We are pleased to provide you with a financing or leasing proposal for this item. Please contact us! Nwodpjw I I Ansfx Ah Ujr

Condition: used, maximum load weight: 33,870 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2003, loading space volume: 43 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Silo structure for bulk materials, total capacity 43,000 litres, 1 compartment(s), 3 dome covers, 2 bottom valves, central discharge, connection for pneumatic unloading, hose box, catwalk with mechanically folding railing on tank, ABS, EBS, BPW EcoPlus axle(s), disc brake system, air suspension, ALCOA aluminium rims; vehicle may be covered with advertising wraps and/or graphics. Our offer generally does not include new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with a quote from our partner workshops! Vehicle may be covered with advertising wraps and/or graphics. Our general terms and conditions of delivery and payment apply. Nodpfxew I I Ahs Ah Uewr We will gladly provide you with a financing or leasing offer for this item. Please contact us!