Used Splinters Separator for sale (6,760)

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Dkjdpfjyrdlasx Al Ssu Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: used, Used Alfa Laval model PX60VGD-140G stainless steel separator centrifuge. Bowl speed max. 6240 rpm. Equipped with 18.5 kW/50 Hz/1500 rpm motor. Some tools available. New in 2003. Dkedpfxszvyi Ie Al Sju

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Dkedpfx Ajw Icgbjl Ssu

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Dsdpfxepu A D Aj Al Sjku Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. Dksdpfxont Uc Rs Al Sju It has a filter and can be cleaned.

Condition: used, Year of construction: 2020, operating hours: 583 h, functionality: fully functional, working width: 650 mm, area performance: 3,900 m²/h, overall weight: 292 kg, tank capacity: 60 l, water tank capacity: 60 l, The Kärcher B60 BP Dose W R65 is a 2020 model and has 583 operating hours. It has been completely disassembled by us, and each component has been checked for functionality and cleaned. The roller brush deck has been fitted with new bearings and new brushes. The suction foot is equipped with new, oil-resistant rubber lips. Four new, maintenance-free batteries are included in the scope of delivery. These can be conveniently charged using the integrated charger. Dedpfez Nfwiox Al Sjku The roller brush deck is ideal for applications where coarse dirt particles (such as wood splinters) are present. The roller brushes "sweep" the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents any particles from adhering to the suction foot, which could impair the suction performance. For efficient use of cleaning agents, the Kärcher B60 BP Dose has a chemical dosing system. Technical data: Working width: 650 mm Tank volume fresh/dirty water: 60 liters Theoretical area performance: 3900 m²/h Operating weight: 292 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: D714 HDB, Tetra Pak Tetra Centri D 714HGV Separator Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Dkjdpfx Ajzy Riyel Sou Machine Type: High-Capacity Centrifugal Separator Year of Manufacture: 2017 Capacity: Approx. 22,000 L/hr Condition: Used – Fully Functional Application: Dairy / Milk / Cheese Processing Location: Ireland Description Tetra Pak Tetra Centri D 714HGV high-capacity centrifugal separator, manufactured in 2017 and previously installed in a large-scale dairy and cheese production facility. The D 714HGV is an industrial centrifugal separator designed for continuous processing in demanding dairy applications. The machine is suitable for high-throughput separation duties and can be used in milk, cream and other dairy-processing applications depending on its configuration. The unit is offered for sale following the decommissioning of the production facility and represents an opportunity to acquire a modern Tetra Pak separation system from an operational industrial plant. Key Specifications Manufacturer: Tetra Pak Model: Tetra Centri D 714HGV Year: 2017 Capacity: Approx. 22,000 L/hr Type: Industrial centrifugal separator Condition: Used Status: Fully functional prior to removal Industry: Dairy / Food Processing Previous Application: Cheese / Dairy Production Location: Ireland Suitable for a range of industrial dairy-processing applications, including: - Milk separation - Cream separation - Dairy processing - Cheese production - Whey processing - Food and beverage processing - High-throughput centrifugal separation Inspection: Available by appointment.

Condition: used, This listing is for a SWECO PH06 Pharmaceutical Separator with matching SWECO Adjust-A-Vibe Control SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF049 Listing name: SWECO PH06Y2 Pharmaceutical Separator Dedpfx Asxzia Hjl Seku

Condition: excellent (used), Year of construction: 2012, operating hours: 1,522 h, Fish / Meat Bone Separator Make: Sepamatic Model: 2000VT Dkedpfx Aljyckiaj Ssu Built 2012 Low running hours: 1522 supplied with 2 drums

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. Djdpfx Alsz Iy Hze Ssku 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: used, Year of construction: 2012, functionality: fully functional, Tetra Pak Separator 2012 Dsdpfx Aszy Rluol Seku

Condition: good (used), Year of construction: 2020, The material separator from Koch Technik is for sale. The scope of supply includes: the price is per unit, 3 units in stock. Djdpfx Alsz Nxwve Ssku 2 x KEM dosing station, version 3.7 – material locking mechanism – level sensor – hopper – pre-mixer, type G 1 x KEM Touch Material separator complete with the components listed above. Mixer, type G: complete with motor and container. Supply voltage: 230V.

Condition: used, Manufacturer: WEINIG Type: UC6 Year of manufacture: 1997 Condition: untested Machine description/technical data WEINIG UNICONTROL6 window manufacturing system including Oertli tool set IV68 and IV77 wood + wood/aluminum (all cutting drawings available upon request) Screen control for 99 window types. 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Manufacturing possibilities: Individual parts, double parts, frame-wise, series production, edge profiling Control of tool positions (longitudinal and transverse machining) via selector switch on the control panel Transverse machining: - electronic length stop for wood lengths up to 2,600 mm, with auxiliary stop for wood lengths up to 3,600 mm, with slot table that moves along and has separate control -Studio window setup: Swiveling length stop ± 60° with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for the production of angled parts Cut-off saw 3 kW Axial adjustment manually with mechanical digital display Laser guide for cut-off saw to detect the section Cut-off saw pneumatically controlled, mortise dimension adjustable via mechanical numerical display Mortise and slot spindle 11 kW (standard 7.5 kW) Tool clamping length: 320 mm Number of tools: 4 x 80 mm Axial adjustment: 240 mm Electronic spindle brake Longitudinal machining: 7 feed rollers in the infeed and 5 in the outfeed, high/low controlled for faster and shorter edge profiling process Synchronous spindle (vertical right) 7.5 kW Before the profiling spindle for splinter-free edge profiling Profiling spindle 11 kW (standard 7.5 kW) Number of tool positions: 4 x 80 mm, pneumatically controlled Axial adjustment: pneumatic Mechanical spindle brake Profile milling unit (horizontal above) 3 kW After the profiling spindle, radially controlled to 2 positions and axially controlled to 3 positions Mechanical spindle brake Profile milling unit (vertical right) at the end of the machine 3 kW Radially controlled to 2 positions and axially controlled to 3 positions Plunge automation: The plunging in/out at the beginning/end of the wood is controlled via 2 adjustable limit switches. Plunge tolerance ± 3 mm. Mechanical spindle brake Return conveyor to the operator including identification function for further processing Partial renewal of pneumatic hoses and extraction hoses in the machine required! Price in €: on request VAT: exclusive Dsdpfx Aozx Smqjl Sjku Availability & Location Location: Greater Freiburg area Available: promptly after dismantling Inspection: in operating condition / in operation Price in €: on request

Condition: good (used), Sweco S18S Separator 5 deck separator, stainless decks and mesh, 400mm diameter meshs, comes with lots of different spare mesh sizes, 1440RPM, on mobile frame, 3Ph Dodpfx Alsz Itice Soku

Year of construction: 2021, condition: used, Removes oil from your compressor condensate The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away. The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Oil-water separator for compressor condensate Filtration: Oil filter and activated carbon filter Dedpez Ndazsfx Al Seku Weight: 6.8 kg (empty)

Condition: used, The SEITAL SPX SE05X cream separator is a machine used primarily in dairy processing to separate cream from milk. Here are some key features and information that are commonly associated with cream separators like this model: Dkedpexzxuaefx Al Seu - Separation Process: Cream separators work on the principle of centrifugal force to separate cream from milk based on their different densities. - Capacity: The SE05X typically features a specific capacity for processing milk per hour, which is essential for both small-scale dairy farms and larger dairy operations. - Material: Most cream separators are made of high-quality stainless steel to ensure hygiene, durability, and easy cleaning. - Efficiency: The design usually maximizes the separation efficiency, allowing for the extraction of cream with a high fat content while minimizing the fat content in the skimmed milk. - Ease of Use: These machines are designed for ease of operation, requiring minimal manual interaction once set up. - Applications: Beyond separating cream from milk, they can also be used for other applications in the dairy industry, including buttermilk separation and processing of other liquids. - Maintenance: Regular cleaning and maintenance are essential to ensure optimal performance and longevity of the machine. Manufacture: Seital Model: SE05X Capacity: 1200 L/h Cleaning: Manual Cleaning Tools: Included Manual Book: Included Base Frame: Included

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Eddy current non-ferrous metal separator type EIS 1000 S, supplied by Panizzolo (Italy), with Panizzolo vibrating feeder. For separating aluminium, copper and other non-ferrous metals from plastics, rubber, wood and inert materials. Technical data: – Type: EIS 1000 S – Belt width: 1,000 mm – Panizzolo vibrating feeder with OLI 1.1 kW vibration motor – Power supply: 3 × 400 V / 50 Hz Electrics: – Separate control cabinet with Schneider ClimaSys cooling unit – 2× Schneider Altivar Process frequency inverters (variable speed) – Control panel with touch display, main switch, emergency stop Djdpfx Asz I Itcel Seku Scope of delivery: separator, Panizzolo vibrating feeder (OLI 1.1 kW vibration motor), control cabinet. By arrangement, an older non-working separator from the same supplier can be included as a source of spare parts. Condition: in working order, separator and feeder tested running. Inspection and test run by appointment on site. Loading onto truck on site. Sold as is, price net plus VAT.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1670-736, type of input current: three-phase, power: 7.5 kW (10.20 HP), rotational speed (max.): 7,570 rpm, space requirement height: 1,600 mm, space requirement length: 1,200 mm, input voltage: 380 V, space requirement width: 800 mm, input frequency: 50 Hz, Equipment: documentation/manual, For sale: GEA / Westfalia Separator SA 14-47-076 professional centrifuge, built in 1980, serial number 1670-736. This machine was used in a craft brewery for beer clarification. Specifications: 15–45 hl/h • 7,570 rpm • hermetic version • self-cleaning / automatic sludge removal • flow meter • 7.5 kW motor • 380 V / 50 Hz • 32 A connection. Dedpfxoztma Us Al Sjku History: The machine was completely overhauled in April 2014. It was acquired in 2018 from another brewery. Maintenance work was documented by GEA / Westfalia Separator Belgium in 2021 and 2023, including the replacement of seals, sleeves, oils, greases and other maintenance consumables. Condition: Complete machine, photographed in its current installation. On-site inspection is possible by appointment. Documentation and GEA invoices are available for serious buyers. Asking price: €19,500 (excluding VAT). Transport, disassembly and loading to be agreed upon with the buyer.

Condition: used, Year of construction: 1980, functionality: fully functional, GEA Westfalia MSA 170-05-076 Whey Cream Separator Dkodpfx Aezy Rkwsl Sju Year:1980 22,000L

Year of construction: 2007, condition: good (used), Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) isolates nucleic acids automatically within one hour. Viral RNA from 96 nasal swab samples can be isolated simultaneously. The Chemagen MSM-1 is an automated system for high-throughput isolation of nucleic acids (DNA/RNA). It uses a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect and redisperse the bound particles. Technical Features & Capacity Throughput: The system is modular and can process 12, 24, or 96 samples simultaneously, depending on the rod head used. Sample volume: It offers high flexibility for volumes from 10 µl to 10 ml. Processing time: 96 samples (small volumes): approx. 15–60 min. Dodpfsyk Uu Njx Al Sjku 24 samples (medium volumes): approx. 35–60 min. 12 samples (large volumes): approx. 45–60 min. Technology: The particles are resuspended by rotating the metal rods at up to 2,000 rpm, enabling high yield and purity without cross-contamination. System Components & Extensions Automation: The MSM-1 can be integrated into standard liquid handling units and often features a 6-axis industrial robot for fully automatic sample tracking. Software: The system is controlled via the chemagic QA software, which is LIMS-compatible. Applications The device is primarily used in research and diagnostics, including: Biobanking and human genetics HLA typing Detection of viruses and bacteria Extraction from various materials such as whole blood, saliva, serum, or plasma System components Actuators: High-precision linear axes for vertical movement and a rotational axis for mixing Electromagnet: Central unit for controlling the magnetic attraction to the metal rods Interfaces: Integrated PC with screen, keyboard, and barcode scanner for sample tracking Software: chemagic QA software (LIMS-compatible, logging, user management) Special features Cross-contamination protection: The use of disposable protective sleeves (tip combs) for the metal rods prevents contact between samples. Automation: Can be combined with the chemagic Dispenser for automated buffer filling or integrated into liquid handling robots (e.g., Hamilton, Tecan). Rod heads: 96 Sampling volume: 10 - 400 μL Number of samples: 1 to 96 samples TFT monitor, keyboard and mouse Year of manufacture: 2007 Dimensions & Construction Base machine (W/D/H): approx. 600 x 640 x 950 mm. Carrier axis (W/D/H): 1940 x 170 x 200 mm (in fully expanded configuration with rail system). Total footprint: A fully configured system can take up to 2000 x 740 x 800 mm (L/W/H). More items - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2021, condition: like new (used), We are offering a Senro optical sorter, manufactured in 2021, for sale. The machine has been used for a limited number of hours. It consists of an infeed conveyor, which transports the product to the sorting machine. The sorting machine is equipped with an air bar containing nozzles that use air pressure to propel the product to be sorted across the bar. Dsdpfx Aezw I Hdjl Ssku The hopper can be equipped with either NIR detection or visual detection. Cameras are still installed. Price negotiable; indicative price €50,000. If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm Dkjdpfxszry N Tj Al Sou - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2013, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0445-30/100x4 AA-2, Four-stage cascade system for separating ferrous materials Working width: 1000 mm 4 magnetic drums 4 vibrating troughs Base frame Dkjdpfx Alsz Ap Rbj Seu As new, immediately ready for use Test run/trial with material possible by arrangement.

Condition: good (used), Year of construction: 2005, operating hours: 3,736 h, functionality: fully functional, overall weight: 21,000 kg, For sale: Westeria wind sifter. Type: WS Raupe Operating hours: 3736 In good working condition. Year of manufacture: 2005. Fully mobile, with good tracks. Includes a generator. Dedpfx Alozbk U To Ssku Ready for use. Keywords: Recycling, waste, sorting, wind sifter, sifter, screening, windshifter, windsifter, tracks, generator, power unit, tracks, mobile

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components. Dkjdjy N Rlvopfx Al Ssu