Used Splitter for sale (153)

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) Gsdpfx Aettgy Hekhjkd F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: used, Frame saw Pini & Kay FN65 HH Passage width: 650 mm Drive motor: 33 kW with saw blades with suspension with intermediate shaft with splitter wedge Gsdpexvz Hzofx Akhokd Immediately available Location: Austria, near Graz

Condition: good (used), power: 0.018 kW (0.02 HP), travel distance X-axis: 2,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 15,000 kg, table length: 2,600 mm, table width: 850 mm, spindle speed (max.): 8,000 rpm, Equipment: chip conveyor, CHARACTERISTICS Table; 2600 x 850 mm X-axis travel; 2200 mm Y-axis travel; 800 mm Z-axis travel; 800 mm Spindle RPM; 8,000 Control; Fagor 8055 - MC Motor power; 15/18,5 Kw Magazine tool capacity; 40 Gkjdpjr I Aumofx Akhod Tool; BT 40 Fourth spindle (IRTS splitter); 350 ⌀ mm Electronic handwheel Cooling through the tool Chip extractor Air cooling Dimensions with extractor (width x length x height); 4029 x 7050 x 3100 Weight; 15,000 kg

Condition: new, functionality: fully functional, power: 0.75 kW (1.02 HP), rotational speed (max.): 1,380 rpm, input voltage: 230 V, input frequency: 50 Hz, input current: 5 A, overall weight: 12 kg, type of cooling: air, protection type (IP code): IP55, New Kramp electric motor, single-phase 230 V, 0.75 kW, 4-pole, 1380 rpm. New in original Kramp box, never used. 20 units in stock. Data according to the nameplate: Gkodpfoz I Swlsx Akhsd Kramp part number: EM80B4MPP1B0 Kramp type: ML 802-4 Nameplate: Uniparts Kavee, IEC-DIN type MY8024/B5 Power: 0.75 kW Voltage: 230 V, 50 Hz, single-phase Speed: 1380 rpm Current: 5.3 A cos φ: 0.92 Protection class: IP55 Insulation class: F Aluminum housing, blue (RAL 5000) Flange design for Kramp MPP hydraulic power units Suitable as a replacement motor for Kramp MPP hydraulic power units, for example for tipping trailers, wood splitters, and lift platforms. Operates on a standard 230 V power outlet. Pick up or shipping available upon agreement. Price is per unit, excluding VAT.

Condition: good (used), functionality: fully functional, For sale: a fully functional Dematic carousel sorter, currently in daily use in our e-commerce fulfillment center in Ingelmunster (Belgium). Godpfxoz E Hxrj Akhskd Completely modernized in 2023: new Siemens PLC control, Keyence SR-5000 barcode scanner (Profinet), Beckhoff servo drives via Profinet/EtherCAT gateway, and a new control PC with visualization, alarm history, status per destination, and manual mode per actuator. Connection to ERP via JSON or SQL. Configuration: infeed conveyor with barcode scanning, splitter, inclined conveyor, and carousel sorter that automatically drops items (including textiles in polybags) into destination boxes. Reason for sale: reorganization of our warehouse around a new, integrated sorting and packaging concept. Inspection while in operation is possible; video available upon request. Available until early 2027. Disassembly and transport are the responsibility of the buyer. Ideal for e-commerce, 3PL, textile, and retail distribution.

Condition: refurbished (used), Year of construction: 2010, HOLTEC log infeed LINCK infeed EV40 LINCK V40 LINCK turning device DV55 LINCK infeed EV30 LINCK V25 LINCK double profiling unit VPP34 Gksdpfx Ae Ai Dc Eokhjd LINCK circular saw VS66 LINCK board separator SEA LINCK turning device DV35 LINCK centering device ZZP LINCK double profiling unit VP34 LINCK circular saw MKV LINCK SEK splitter wedge

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 239000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” Gksdpfxezwk Ids Akhjd 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 Gkodpfx Aksh T Dvtshsd KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: refurbished (used), functionality: fully functional, Camoga C420R CE Surface splitter/walling machine – a machine for splitting leather Working width: 420mm Features automatic blade feed Two material feed speeds Machine equipped with a display showing the thickness of the split material Dust extraction system, powerful suction system, and waste bin Machine in perfect technical condition after a complete service. Price available upon request. Delivery to the customer by courier is possible. Gksdpfx Akoz Dpikehod

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. Gkedpfx Aepz I Ncjkhed The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material Gkodpfx Aszlr Rcekhed • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons Gkedpfxolu Dc Ns Akhed 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Gksdpfxen I Rgpo Akhsd Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Price and further information on request. We will be happy to make you a non-binding offer.

Condition: new, Year of construction: 2026, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Gkedpfxjdf Ud Se Akhed Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Year of construction: 2026, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Gkjdodf Ufdjpfx Akhed Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: excellent (used), CNC Flexible FULL Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner Gedjzxc Ncspfx Akhjkd

Condition: new, Year of construction: 2026, The carrier unit allows the operation of a wide range of equipment, such as cone splitters, earth augers, root grinders, sweepers, rotary harrows, and much more. The equipment is developed and manufactured in Germany. Very robust roller bearings ensure that the forces are safely absorbed in both axial and radial directions. A large, high-performance hydraulic motor, type HMT500, provides the necessary torque for powerful and efficient operation, with up to 1600 Nm. Oil flow rate up to 125 l/min, pressure up to 210 bar, and speed of 240 rpm. Article no.: MTT500 Godjdf Sgrjpfx Akhokd Earth augers, drill cones, and other tools are available on request for an additional charge. Quick-change mounts MS 01 - MS03 - MS08 or other adapters are also available on request and for an additional charge.

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 8,260 mm, color: green, overall weight: 4,800 kg, first registration: 12/2024, rear tire size: 8 x 10.0/80 x 12 – AW – 909 TL 10 PLY, total width: 8,260 mm, machine/vehicle number: 9983013, Equipment: compressed air brake, front power take-off, hydraulic folding, lighting, Machine weight*: 4800 kg (10582 lbs) Hitch: drawbar with multiple positions Cutting width: 8.06 m (26′ 5″) Machine working width: 8.26 m (27′ 1″) Machine transport width: 2.81 m (9′ 3″) Maximum working length: 6.33 m (20′ 9″) Transport length: 6.07 m (19′ 11″) Deck height: 0.24 m (10″) Transport height: 3.78 m (12′ 5″) Cutting height: 25 mm – 400 mm (1″ – 15 3/4″) Cutting capacity: 100 mm (4″) Wing working angles: 45° upwards / 15° downwards Recommended tractor power: 150 hp (112 kW) Gjdj Agtpgopfx Akhekd PTO speed: 1000 rpm Gearbox(es): 6 x cast iron housing Drive shaft: 1 3/8″ Z20 SFT 10 on the tractor side Gearbox lubricant [splitter]: EP80-90W or GL-4 / GL-5 oil Gearbox lubricant [rotor]: 85W-140 oil Oil capacity gearbox [splitter gearbox]: 2.7 liters (4.7 pints) Oil capacity gearbox [center gearboxes]: to be determined Oil capacity gearbox [rotor gearboxes]: 4 x 4.3 liters (7.6 pints) Construction of the cutting deck: Fully welded construction. Thickness of the cutting deck material: 5 mm (3/16″). Thickness of the side skirt material: 6 mm (1/4″). Construction of the skid shoes: Replaceable, bolted skid shoes; Anti-scalp plate: 6 mm (1/4″) round plate with blade holder bar; Standard blades: 15 x 12 mm (1/2″) 30 carbon tool steel, hardened and tempered. Free-swinging, high lift – low friction. Right-hand rotation. StarCut blades: 15 x 12 mm (1/2″) 30 carbon tool steel, hardened and tempered. Free-swinging, high lift – low friction. Left-hand rotation. Blade bolts: M24 with shank, class 8.8. Blade tip speed: 79 mps (15.551 fpm) Drivetrain: ASAE Category 8 Drivetrain protection: 2/4-way slip clutches on the rotor gearboxes. Freewheel on the input shaft Rear wheel mounting kits: Welded tube axles Rear wheels: 8 x 10.0/80 x 12 – AW – 909 TL 10 PLY tire with steel rim Front protection: Chain guards with loops on each deck Rear protection: Chain guards with loops on each deck Options: Drive shaft with 20, 6 or 21 splines / Swivel eye or K80 drawbar eye / Set of front flaps / Set of rear drawbar & hoses / Air brakes

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. Gksdpfepz I I Hex Akhed The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,150 mm, color: green, overall weight: 3,850 kg, first registration: 11/2025, rear tire size: 8 x 10.0 / 80 x 12 – AW – 909 TL 10 PLY pneumatic tyre with steel rim, total length: 6,510 mm, Equipment: compressed air brake, front power take-off, hydraulic folding, lighting, Robust rotary mower from Spearhead – the No. 1 in heavy-duty rotary mowers for agricultural and airfield applications. Machine weight*: 3850 kg (8488 lbs) Hitch: drawbar with multiple positions Cutting width: 6.31 m (20′ 8″) Machine working width: 6.51 m (21′ 4″) Machine transport width: 2.33 m (7′ 8″) Maximum working length: 5.80 m (19′ 1″) Transport length: 5.66 m (18′ 7″) Cutting deck height: 0.30 m (1′) Transport height: 3.10 m (10′ 2″) Cutting height: 0 mm – 495 mm (0″ – 19 1/2″) Cutting capacity: 100 mm (4″) Side arm working angles: 45° upwards / 15° downwards Gksdps Agr N Nefx Akhjd Recommended tractor power: 120 hp (89 kW) PTO speed: 1000 rpm Gearbox(es): 6 x cast iron housing. Input shaft: 1 3/8″ Z21 or Z6 SFT 8 on the tractor side. Gearbox lubricant [rotor]: 85W-140 oil. Gearbox lubricant [splitter]: 85W-140 oil. Gearbox oil capacity [splitter gearbox]: 3.5 liters (6.1 pints) Gearbox oil capacity [center gearbox]: 4.3 liters (7.6 pints) Gearbox oil capacity [side gearboxes]: 4 x 4.3 liters (7.6 pints) Cutting deck construction: Fully welded construction Cutting deck material thickness: 5 mm (3/16″) Side skirt material thickness: 6 mm (1/4″) Slider construction: Replaceable, bolted sliders; Anti-scalp shield: 6 mm (1/4″) round shield with blade holder bar; Standard blades: 15 x 12 mm (1/2″) 30 Carbon Boron, hardened and tempered. Free-swinging, high lift – low friction; Star-shaped blades: 15 x 12 mm (1/2″) 30 carbon-boron steel, hardened and tempered. Free-swinging, low friction – non-shear; Blade bolts: M24 with shank, class 8.8; Blade tip speed: 93 mps (18,307 fpm) Drivetrain: ASAE category 6 Drivetrain protection: 2/4-way slip clutches on rotor gearboxes. Overload protection on input shaft Rear wheel mounting sets: Tubular, welded axles Wheels: 8 x 10.0 / 80 x 12 – AW – 909 TL 10-ply tire with steel rim Front protection: Chain guards with loops on each deck Rear protection: Chain guards with loops on each deck Options: Drive shaft with 6, 21 or 8 splines / Standard, pivoting drawbars or K80 drawbars / Set of front flaps / Set of front running wheels

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: HAW1700-EV-Funk, rope length: 30,000 mm, rope speed: 47,000 mm/min, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm Gkedpfedf Ufpex Akhjd The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk

Condition: used, Complete factory for the production of furniture cabinets, composed by: Gksdpfxocr U Urj Akhjd SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), 03. Pini and Kay VU 65 HH e band saw with splitter wedge with 45 kW drive motor with gearbox with saw blades with saw blade tensioner Gkedpfx Ash Ict Eekhed with clamping device with templates with blower Location: Austria, near Steyr

Condition: new, Year of construction: 2023, Round tree debarker CAMBIO 45 AIR TEN.CAMBIO 35.VK-450.Debarker will be sold after overhaul.Debarker will be equipped with new generation knives. The machine can be sold as part of debarking lines. Which consists of 1. Table for unbarked logs 2. Hydraulic log splitter. Gksdpfxoiqi S Ns Akhsd 3. Feed conveyor. 4. Scraper bark conveyor. 5. Outgoing conveyor with log dumper to the left side. 6. Pocket for debarked logs. All equipment is new

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: Gkjdpfx Akstr Envohjd W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S