Used Spm 113 for sale (999)

Condition: ready for operation (used), Heidenhain UM 113 ID 325 002-03 SN: 15213487 – with test protocol, professionally fully overhauled and tested, comes with a 3-month warranty, 100% functional, scope of delivery as pictured, used, in good condition, 100% functional, scope of delivery as per photos Ledpfox Eta Isx Adtohf

Condition: ready for operation (used), Heidenhain UM 113 . 325 002-03 SN: 13547884D1 – completely overhauled with 3 months warranty – professionally refurbished and tested with a 3-month warranty, 100% functional, scope of delivery as per photos Lhsdpfex Etbrex Adtsf

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 113 . 325 002-01 SN: 8115060 in an exchange service. The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective core unit must not have any mechanical damage such as fractures, as these are irreparable. In such cases, an additional charge of €500 incl. VAT will apply. Lhjdpsx Etbxsfx Adtjf

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included. Specifications: Lhsdpfx Adeyma Efotsf Power: 45 kW Style Blades: butterfly / tri-foil agitator

Condition: new, functionality: fully functional, machine/vehicle number: NEW - 50, maximum load weight: 777 kg, overall weight: 1,000 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 205 113 1000 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Sidewall height incl. railing: 43cm Loading platform height: 52cm Gross vehicle weight: 1000kg Lsdjrk Ikqjpfx Adtshf Payload: 777kg Braked single-axle low loader Overrun brake and handbrake by AL-KO 1000kg axle with 1350kg brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust phenolic plywood side panels Steel railing Rear tailgate foldable and removable with tension latch 15mm strong, non-slip and robust phenolic plywood floor Jockey wheel 6 lashing rings with 400kg pull force each 13" tyres 2x U-chocks Net/rope hooks on frame 13-pin plug Front marker lights Rear lights with reversing light, rear fog light, and triangular reflector OPTIONAL ACCESSORIES PERMANENTLY PRICE REDUCED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Foldable and removable front wall - Loading ramps - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh sides in various heights, also closed - Flat tarpaulin with or without bows - High tarpaulin 120cm, openable on all sides - Rear supports More accessories available on request! Plus freight to Gera and vehicle registration document €100 net Pictures are examples and may show optional accessories at extra cost. Haven't found the right trailer yet? We have 50–100 vehicles permanently in stock, ready for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, including caravan axles. Large selection of rental trailers. In addition, we offer a wide range of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website, or drop by in person.

Condition: new, functionality: fully functional, empty load weight: 155 kg, maximum load weight: 595 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,130 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, SARIS MP 205 113 750 1 NEW VEHICLE Internal dimensions: 205cm x 113cm Side wall height incl. railing: 43cm Loading platform height: 51cm Gross vehicle weight: 750kg Payload: 595kg Unbraked single-axle low-loader KNOTT axle Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls Steel railing Rear tailgate fold-down and removable 15mm thick, non-slip and durable phenolic plywood floor 6 lashing eyes with 400kg tensile strength each 13" wheels M+S tires Net/rope hooks on the frame Lsdpfjrk Ilvox Adtohf 13-pin plug Front marker lights Rear lights with reversing light, fog lamp, and triangular reflectors Plastic mudguards 2x wheel chocks T-bar drawbar OPTIONAL EQUIPMENT PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Folding and removable front wall - Loading ramps - Tilting loading platform - Ramp in combination with tilting loading platform - Gas springs for tilting loading platform - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh side extensions in various heights, also closed - Flat cover with or without hoops - High cover 120cm - Rear supports - Jockey wheel Additional accessories on request! Plus shipping to Gera and vehicle registration document €100 net Images are for illustration purposes and may include optional accessories at extra cost. Haven't found the right trailer yet? We have 50-100 vehicles in stock, available for immediate pickup. Workshop open weekdays from 8:00am to 5:00pm for all types of repairs. Specialist for axle repairs, including for caravans. Large selection of rental trailers. We also have a wide range of spare parts and accessories for trailers from all manufacturers. Get professional advice by phone, visit our website, or drop by in person.

Condition: ready for operation (used), Bosch SPM 17-TB spindle module, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Lsdsi D Uf Nepfx Adtshf

Condition: new, Bosch SPM 75-TD spindle module SN, unused, 100% functional, scope of delivery as per photos Lsdpfji D Ugmsx Adtshf

Condition: new, Bosch SPM 75-TD spindle module SN, unused, 100% functional, scope of delivery as per photos Lhedpfx Aoi D Ugisdtef

Condition: used, functionality: fully functional, machine/vehicle number: 5350, Year of construction: 2008, operating hours: 11,533 h, load capacity: 1,200 kg, lifting height: 4,350 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,400 mm, empty load weight: 2,360 kg, drive type: Elektro, Electric 3-wheel forklift Chassis number: 5350 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tire type: Super elastic Front tire condition: 40 - 60% Ledpfxjx S Tb Ej Adtohf Rear tire type: Super elastic Rear tire condition: 40 - 60% Battery voltage: 24V Battery type: PzS Side shifter, 3rd valve, front work lights, roof cover, safety light, interior mirror, 3-wheel, seat,

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Faster than the equivalent sliding-table press, the fixed-table Printmaster is perfect for medium and long production runs, delivering excellent quality results with virtually any material up to 4 mm thick. And because the machine prints incredibly fast, the Printmaster is undoubtedly the best on the market. Among its many sophisticated features is the patented dual gripper system that ensures perfect registration and quiet operation. The Printmaster can also be equipped with various optional systems and accessories that make it even more versatile, faster and easier to use. Integrated PLC control system. Independent LCD touch panel with setting and monitoring of printing parameters: - Job parameter storage system. - settings diagnostics. - Variable stroke lengths of scraper and flood coater. - Adjustable clamp, scraper and flood coater speeds. Motorized off-axis contact adjustment. Hardened, self-balancing stop points combined with "locking" fingers for material control. Lhedpsuptf Ajfx Adtof Maintenance-free toothed belt drive for the scraper carriage. Double gripper bar shuttle system. Folding feed table. Fiber-optic registration control. Prepared for the addition of a feeder. High-strength steel lifting columns. Anodized aluminum work surface. Printing frame insertion. Multi-purpose self-adapting clamps. Pneumatic scraper pressure equalizer. Pneumatic scraper and flood coater changeover. Pneumatic clamping of printing frame and back bars. Horizontal flooding. Choice of flooding: immediate or delayed. Timer for machine stop to allow peeling action. Adjustable peeling at 6 levels. Adjustable blowing system. Foot pedal.

Condition: used, mileage: 472,000 km, power: 265 kW (360.30 HP), first registration: 02/1992, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, - Retarder - Manual transmission - Well-maintained - Cormach 87000 with 42-meter reach Suspension: Leaf suspension Ledpfjyklrfox Adtshf

Condition: used, mileage: 28,400 km, power: 96 kW (130.52 HP), color: white, gearing type: mechanical, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, power assisted steering, - In order to provide you with the best possible advice, we kindly request that you schedule an appointment. Mr. Kiel will be glad to assist you. Tel: BA3 Active Brake Assist, BB0 Brake system with ABS and ASR, BB3 Electronic Stability Program (ESP), C6L Multifunction steering wheel, CL1 Steering wheel adjustable for tilt and height, D50 Full-length partition, E07 Hill Start Assist, E1D Digital radio (DAB), E2X MBUX multimedia system with DAB, E4S Smartphone integration package, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F68 Heated and electrically adjustable exterior mirrors, FE3 Front power windows with comfort operation, FG1 Armrest with storage compartment, FQ3 Glove compartment, front passenger side, closed, FR8 Reversing camera, GK6 6-speed manual transmission, H06 Air conditioning, H10 Seat heating for driver and front passenger, H20 Heat-insulating all-around glazing, HI2 Climate zone 2 (temperate), I3O Without speed limiter, I5C Petrol engine, I5T Plastic underbody protection, I5V Steering wheel with foam padding, I5X Basic interior trim, IA0 Axle configuration 4x2, IF6 Panel van, IG4 Standard, J10 Speedometer km/h, J56 Seat belt warning system for driver and front passenger seats, JA5 Light and rain sensor, JB4 Active Lane Keeping Assist, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KA1 Particulate filter, L12 Headlamps in halogen technology, L16 Fog lamps halogen, MA2 Speed limit assist, MJ8 ECO start/stop function, MO6 Emissions standard Euro 6d M/N1 GR. II, MS1 Cruise control, Q10 Cross-member for tow bar, RY2 Tire pressure monitoring front and rear axles, wireless, SD1 i-Size child seat attachment, SL2 Height-adjustable front passenger seat, T16 Sliding door right, T78 Sliding door rail cover in vehicle color, V29 Plastic flooring in boot/load compartment, W50 180-degree double rear doors without window Lodpfxsyfr Euo Adtohf We are happy to provide you with a trade-in offer for your used vehicle. Should you wish to lease or finance your vehicle, we will be pleased to create an individual offer for you. Errors and subject to prior sale. Mr. Kiel will be glad to assist you. ESP, Navigation system, Particulate filter, New MOT, Partition = Further information = Engine displacement: 1,332 cc Gross vehicle weight: 1,973 kg Please contact Tobias Ebert for further information.

Condition: refurbished (used), Year of construction: 2013, operating hours: 593 h, load capacity: 1,250 kg, lifting height: 3,100 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,080 mm, fork length: 1,150 mm, empty load weight: 2,142 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN OPERATION Our forklifts are fully refurbished according to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is comprehensively inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Thorough technical inspection ✔ 400+ vehicles available ✔ Worldwide transport & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on-site now and receive expert consultation – we will find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Type: Counterbalance Forklift EFG 113 Drive type: Electric Rated capacity: 1,250 kg Year of manufacture: 2013 Operating hours: 593 Lift height: 3,100 mm Mast type: Duplex Free lift: Yes Overall length: 1,720 mm Overall width: 990 mm Overall height: 2,080 mm Fork length: 1,150 mm Unladen weight: 2,142 kg Load centre: 500 mm Tyres: Solid rubber Model: EFG 113 Battery type: PzS Battery weight: 615 kg Cabin equipment: Multipilot control lever Ledpox H T Nrofx Adtehf Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Attachment: Side shifter Attachment: Additional hydraulic circuit routed to fork carriage

Condition: used, mileage: 354,000 km, power: 100 kW (135.96 HP), first registration: 01/2012, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 1,906 mm, total height: 1,902 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * MB 113 cdi Vito panel van with air conditioning & trailer coupling - manual gearbox - * Diesel - Displacement : 2.143 ccm³ - 100 KW / 136 PS - Euro 5 - Green sticker * Chassis number : WDF63960313689986 - Vito with 3 seats - * Gross vehicle weight : 2,800 kg - Unladen weight : 2,000 kg Towing capacity : 2,000 kg braked - 750 kg unbraked - * German vehicle - German vehicle registration document Ljdpexgldxsfx Adtehf * German vehicle - German vehicle registration document - 1st hand vehicle - * Vehicle immediately available and ready for collection - Vehicle has signs of use * PICK-UP PRICE - TAKE AS IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * For viewing please make an appointment - * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale. Optional extras: AUX-IN connection, exterior mirrors electr. adjustable and heatable, both, BlueEfficiency package, Front broadband loudspeakers, Window for rear doors / tailgate with wiper/washer system, Window in load compartment / passenger compartment: - fixed, front right, Rear door (opening angle 270 degrees), Wooden floor in load compartment, Additional interior light in load compartment, Full-length load compartment partition with sliding window, Seat belt system with warning system (driver's side), Seats in cab: Double passenger seat, Fleece battery 95 Ah, Additional heater Further equipment: Adaptive brake light, Airbag driver's side, Version: Vito panel van, Exterior mirrors aspherical, both, Mounting rails for roof rack, Brake assist, Windshield with windshield antenna, Generator 180 A, Body/bodywork: panel van, Body/bodywork: long, Steering wheel (steering column mech. (steering column mech. adjustable), Truck registration, Model upgrade, Engine 2.1 ltr. - 100 kW CDI KAT, Pollen filter, Wheelbase 3200 mm, Tire repair kit with compressor, Low-emission according to Euro 5 emissions standard, Sliding door loading/passenger compartment right, Seat cover/upholstery: Lima fabric, Cladding in loading/passenger compartment: Half-height hardboard

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Lhedpfx Adov T T N Hetsf Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Condition: reconditioned (used), Year of construction: 2025, grinding length: 400 mm, grinding width: 200 mm, JUNG JF415 / JF420 rebuilt mechanicaly, geometricaly und electricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis Ledpfx Adjc S Agvetjhf fpr direct access of the worker over switches on the control panel - 12 month warranty delivery time approx. 12 weeks max. grinding range: 400 x 200 m

Year of construction: 2023, condition: refurbished (used), JUNG HF50 SPM mechanically and geometrically overhauled according to JUNG new machine protocol Electrical overhaul approx. 2010 / function tested and wear parts replaced (in new control cabinet) new painted - stepper motor infeed - 3 axis digital display - dressing mass compensation - adhesive force control - used magnetic clamping plate Ljdpfx Adohcw U Ujtshf - paper band filter optional 12 months warranty on mechanics and geometry and 6 weeks parts warranty on electrical components max. magnet size: 600 x 200 mm (standard 500 x 200 mm) max. grinding area: 600 x 250 mm delivery time: by arrangement / subject to prior sale We will gladly take your used JUNG grinding machine in payment

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Lhsdswqw Tvjpfx Adtef Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Year of construction: 2025, condition: new, Semi-automatic edge grinding machine for secondary sides and cover plates. Depending on the application, diamond grinding rollers or diamond grinding discs are used. • Pneumatic workpiece clamping • The workpiece can be freely rotated and securely clamped on a turntable • Thickness of workpieces up to max. 18 cm • Working area: max. 1.4 x 1.4 m • Manual tool change • Spindle mount M30 • Speed range 600–2,800 rpm • Machine length: 1.7 m • Machine width: 0.8 m • Machine height approx.: 2 m Lhodpexmuvdofx Adtjf • Machine weight approx.: 500 kg • Required space approx.: 2.7 m x 2.7 m • Installed power: 5.5 kW

Condition: used, mileage: 524,000 km, power: 250 kW (339.91 HP), first registration: 05/1990, fuel type: diesel, overall weight: 18,000 kg, gearing type: mechanical, - Manual transmission - Kaiser, fully functional Lhedpfxox Hc Ids Adtof Suspension: leaf spring suspension

Condition: used, 🧰 Product Features • Manufacturer: SSI Schäfer • Model: EK 113 • Condition: used • Material: Polystyrene • Color: Blue • Volume: 4.1 l • Net weight: 0.34 kg Ledpox Ig R Ejfx Adtohf • External dimensions: 274 x 174 x 95 mm • Internal dimensions: 268 x 168 x 90 mm • Stackable: Yes • Dimensionally stable: Yes 💰 Price €1.90 net excl. VAT. Price from 100 pcs: €1.70 net excl. VAT. • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: possible at any time by appointment Constant stock of over 5,000 linear metres of pallet racking from numerous manufacturers (Technical data, specifications and prices subject to change and errors excepted, intermediate sale reserved! See our terms and conditions, all prices exclude VAT ex works.)

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. Lhodpfx Adexghngotef You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Lhsdpfx Ajwwip Aedtjf Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 03/1992, loading space length: 12,450 mm, loading space width: 2,500 mm, loading space height: 3,710 mm, loading space volume: 50 m³, total length: 12,460 mm, total width: 2,520 mm, total height: 3,730 mm, suspension: air, tire size: 385/65-R22.5, color: white, Year of construction: 1992, Equipment: ABS, = Additional Options and Accessories = - ADR - BPW axles - EBS - Lift axle - Alloy wheels - Air suspension - Drum brakes - Central lubrication system = Remarks = OMSP MACOLA tank semi-trailer, year of manufacture 1992, for butane/propane/gas, 49,500 l (single chamber), ADR (FL, AT), tightness test valid until 02/2026, periodic tank inspection valid until 02/2029, ABS/EBS, BPW Eco-Plus axles with drum brakes, Alcoa rims, central lubrication, 1st axle = lift axle, test pressure 25 bar, complete with pump, tires 385/65-R22.5 (L: 7/15/14 mm; R: 12/14/7 mm), unladen weight: 12,200 kg, GVW: 34,000 kg, German registration = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW ECO-PLUS Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 8,000 kg; left tire tread: 45%; right tire tread: 75% Rear axle 2: Alloy wheels; max. axle load: 8,000 kg; left tire tread: 95%; right tire tread: 90% Rear axle 3: Alloy wheels; max. axle load: 8,000 kg; left tire tread: 80%; right tire tread: 45% Weights Unladen weight: 12,200 kg Payload: 21,800 kg GVW: 34,000 kg Functional Body manufacturer: OMSP MACOLA GAZTANK 49,500L Ledeyz Umhepfx Adtohf Number of compartments: 1 Pump: Yes Hoses: Yes Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.