Used Spreader for sale (516)

Year of construction: 2024, condition: used, New: Yes Cargo space capacity: 3.200 l Tyre size on axle 1: 500/50/17 Crsdpfx Apszbmhvehsd Tyre size on axle rear: 500/50/17

Year of construction: 2017, condition: used, New: Yes Height: 235 cm Cedpfxezbmhcj Apherd Cargo space capacity: 4.450 l Tyre size on axle 1: 560/60r22.5 Tyre size on axle rear: 560/60r22.5

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN Spreader, 550-liter capacity, Type SDB105H063L120KHKAVA - Painted in RAL 2004 Holder Orange - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Speed-dependent spreader - 2 augers and speed-dependent control - Stainless steel design – container and sheet metal parts made of stainless steel, glass bead blasted and coated with a special paint. - Color: Holder Orange Basic Duplex spreader: - Speed-dependent, twin-chamber mounted spreader with an extremely low center of gravity, two longitudinal augers with independent hydraulic drive as a conveying and metering device, the spreading disc is also hydraulically driven, the augers and spreading disc are separate and can be regulated independently in a closed-loop system (with feedback). - The application rate and spreading width are controlled via a microcomputer. - The set spreading rate is speed-dependent and controlled according to the vehicle speed. - For rapid emptying, transport, and assembly work, the discharge chute with spreader can be folded upwards. Standard equipment: - Microprocessor control unit MCSS (for operation) - Work lights can be switched on from the control panel - Rotating beacon can be switched on from the control panel - Partition between the spreading material chambers with equal division of the chamber volume (removable) - Rubber skirting attached to the discharge chute - Folding cover including operating cables - Winter service marking - Manual emergency operation of the hydraulic control valves (for operating the drives without control) - Prepared for wet salt system (retrofitting only possible at the factory) - Lighting system - Angled roof frame - Mounting frame and initial assembly of the spreader on the vehicle - Rotating beacon and work lights - Pre-carriage from the factory - Mounting kit Holder LIST PRICE: € 22,515 (plus applicable VAT) Crodpfxezf E Hqj Aphed YOUR SPECIAL NET PRICE: € 15,400 (plus applicable VAT) The following option is available at an extra cost: Additional cost for outrigger legs, 3 tons: € 990 (plus applicable VAT) Subject to changes, typographical errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to Crsdpfx Apozf E Dvjhed the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: good (used), Year of construction: 2013, operating hours: 5,631 h, load capacity: 1,600 kg, lifting height: 3,375 mm, fuel type: gas, mast type: duplex, construction height: 2,160 mm, mileage: 5,631 km, EXPECTED This duplex LPG forklift from the brand STILL is in good condition and from 2016; Capacity of 1,600 kg; Lifts to a height of 3,375 mm; Suitable for container use; Equipped with FREELIFT, SIDESHIFT and a FORK POSITIONER; Clearance height is 2,160 mm; Forks 1,200 mm; 5,631 operating hours; Video will follow. Cjdjy Sm I Sspfx Aphord

Condition: used, Year of construction: 2025, _____Year of manufacture 2025 14,000 litres 4,000-litre pump Suction connection right/left Suction arm right Credpsyr U Ifsfx Aphed Tyres 750/60R 30.5 Hydraulic drawbar adjustment Front cutter Electric forced steering Filling automation with shut-off function Signo Smart control Bomech with two cutters 6-inch suction arm with 8-inch ball coupling Half-width shut-off via slide valve Bomech trailing shoe distributor Speedy Small 12 m Vehicle has not been registered, Storage location: none

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Cedpjy Um Ttefx Aphord

Condition: like new (used), Year of construction: 2020, operating hours: 1,647 h, load capacity: 3,500 kg, lifting height: 220 mm, fuel type: electric, mast type: simplex, Manufacturer + model: JUNGHEINRICH EJK 335 Drum forks / Spreader!!! ID: 26062.6948 Category: Used Mast: 1F220 Forks: 1150 mm Capacity: 3500 kg Year: 2020 Crsdpfxjzaf Ilo Aphsd Hours: 1649 hours Battery: 24v / 375Ah Options: SPECIAL build!!! Drum roll / Spreader - forks!!! Distance between support legs: 1400 mm Truck width over support legs: 1740 mm Power steering

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, overall weight: 49 kg, total length: 775 mm, total width: 400 mm, total height: 600 mm, space requirement height: 775 mm, space requirement length: 600 mm, space requirement width: 400 mm, NEW +++ NEW Streich-Hex NEW +++ NEW TOP model: SH 1.2 Pneumatically operated spreading device lightweight and easy to operate for spreading chilled, untreated butter onto baked goods Tabletop device made of stainless steel includes: 1 nozzle, selectable from 20 - 30 mm width Optional: Codpfxjrkz Hkj Aphsrd Leasing & Rental Service - Butter container with attachments - Threaded adapter - Spreading nozzles 20/25/30/35/40/50 mm - Maintenance contract Training & commissioning More top bakery machines in stock!

Condition: good (used), Year of construction: 2011, operating hours: 10,836 h, load capacity: 4,500 kg, lifting height: 5,180 mm, fuel type: electric, mast type: duplex, construction height: 3,400 mm, empty load weight: 6,582 kg, mileage: 10,836 km, This DUPLEX electric forklift from the brand STILL comes from 2011 and is in good condition;The forklift has a capacity of 4,500 kg;Lifts to a height of 5,180 mm;Drive-through height 3,400 mm,Equipped with a SIDESHIFT and a FORK SPREADER;The battery is equipped with an external charger and an automatic filling systemMake an appointment for a test drive.Watch the video on YouTube Credpfxsxc U Hho Aphjd

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Crsdpfx Aoy D Hfzsphed Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: used, functionality: fully functional, Year of construction: 2011, Salt spreader: + Egholm + Compatible with CityRanger / Parkranger 2100 / 2150 + Stainless steel container + Disc spreader + Hydraulically driven + Cover + Year of manufacture: 2011 + Demountable frame Credezd Atxepfx Aphsd Price per unit Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: like new (used), working width 1300mm Crsdpszixgrofx Aphed manual cleaning brush manual height adjustment of the component glue application rate adjustment CE marking safety switch 380V power supply

Year of construction: 2022, condition: excellent (used), Crane spreader beam, Wewira, 3 tons - second-hand : Price ex location: 6.500.-€ (net)! Manufacturer: Wewira Type: Equalizing spreader beam Year of construction: 2022 6.000mm 6 hooks Load capacity: 3.000kg New price, 7.800.-€ (net) Condition: very good - basically unused! - Classic bad buy! Is currently only a little dusty! Crodpoq Tqm Tjfx Aphed Available: immediately Location: 79206 Breisach am Rhein

Condition: good (used), Code: 0397 Brand: ITALPRESSE Model: R4/130 - CE Standard Automatic 4 rollers glue spreader for vinyl glue (PVAC), urea glue (UF) and polyurethane glue, for various types of materials like MDF, chipboard, plywood, parquet, composite materials, plasterboards, furniture, panels, doors and various, building sector, sponges, mattresses, papermaking - CE Standard Technical specifications: Working width mm 1300 Max working passage mm 100 Power 0,75 Kw Spreading rollers diameter mm 210 Variable roller feed speed Automatic rollers cleaning Motorised outfeeding discs Codpfx Apszbmxujherd Overall dimensions mm 2150 x 1100 x 1600 h Weight kg 750

Condition: like new (used), working width 1350mm cleaning brushes adhesive application rate adjustment via a metering roller Crsdpfjzimfisx Aphjd safety switch

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new Crjdpfxsziux Rs Aphjd 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: new, Year of construction: 2023, functionality: fully functional, Main roller dimensions…………….……195*1300 mm Crodpszhvu Dofx Aphod Number of main rollers…………….…….2 Main roller material ……………..……..Rubber Main roller motor power ……………...…….0.75 Kw Motorized thickness adjustment power ……………..…..………..0.37 Kw Weight ……………..1 ton Feeding speed…………….18 m/min CE STANDARDS Safety door and emergency switches on both sides Emergency switch bars on both sides Manual cleaning brush system

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, For sale is a high-quality, adjustable beam traverse/crane traverse from the brand LOADLIMIT. This traverse is ideal for safely lifting and transporting long or bulky loads with a crane or forklift. Credpfey U Idasx Aphed The adjustable design allows the traverse to be flexibly adapted to different load widths. Very robust industrial design in near-new condition. Technical data: Manufacturer: LOADLIMIT Type: TBV 3.0-3500-1700 Year of manufacture: 2021 Load capacity: 3000 kg Adjustment range: 1700-3500 mm Weight: 137 kg CE version. Condition: Used, very good condition, ready for immediate use. Pick-up only. No guarantee or warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) Cedpfx Aozh Tyqjphord 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: good (used), Code: 0298 Brand: OSAMA Model: S1R-250 - CE Standard Manual 1 roller gluing machine for edges and block wood, carpentry, furniture, laminated wood beams, and various - CE Standard Technical data: Max working length 250 mm Roller diameter 150 mm Cjdoyi E Hgepfx Aphord Feed speed 28 m/min Motor power Hp 0,25 Working table height 800 mm Overall dimensions mm 1500 x 700 x 850 h Weight kg 100

Condition: repair required (used), functionality: limited functionality, Year of construction: 2016, suitable for, e.g., salt and sand for attachment to forklifts, small tractors, etc. with solid rubber tires Crodpfx Aezdkamephed spreading device is unfortunately defective spreading width: 1 to 6 m hopper capacity: 105 liters weight: 28 kg load capacity: 135 kg

Condition: good (used), Tiger Beam Spreader Bar TAV Crane Spreader Bar with Two Adjustable Swivel Load Hooks These crane spreader bars offer versatile application for transporting a wide variety of loads in crane operations. This adjustable beam spreader bar features two adjustable assemblies, each equipped with a swivel hook for attaching the load. Crodpfx Apoy Nyyiohed The spacing between the adjustable assemblies is set independently on each side using a notched grid system. This allows the desired working width to be adjusted very quickly. The adjustable assemblies can be quickly and easily repositioned along the beam within the grid increments (dimension VR). Thanks to this adjustability, the range of potential applications is significantly expanded compared to a rigid, fixed-width spreader bar. The Tiger TAV series crane spreader bars are equipped with two adjustable assemblies—including integrated handles—and two swivel load hooks. The scope of application for a beam spreader bar is extremely diverse. They are found everywhere: in manufacturing facilities, plant construction, on construction sites, and in intralogistics operations. In the field of intralogistics—specifically for loading large, heavy, and elongated cargo onto trucks, trains, and ships—they have become an indispensable tool. Tiger Support Stands for the safe storage of Tiger beam spreader bars | Load Capacity: 1,000 kg | Model: AFG5 Product Features Model: TAV-5-4 Load Capacity: 5,000 kg Hook Spacing (L): 2,000 – 4,000 mm Tiger Spreader Bars for Crane Operations Adjustable Crane Spreader Bar with 2 Load Hooks Suspension Point: Designed for single hooks (DIN 15401) Finish: Painted in RAL 1004 (Golden Yellow) Dead Weight: 335 kg Overall Height: 800 mm Manufacturer's Price: €3,223.71 Support Stands: €877.03 Find more items—both new and used—in our online shop! International shipping costs available upon request!

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution Codpfx Asx Uwp Eophjrd ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology Cedpfxjy Avqdj Aphord • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended