Used Stamping Cylinder for sale (8,783)

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg Kwjdox Hqmhopfx Ahzjt 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm The machine is ready for die cutting. Kwodpfex N D Udjx Ahzot Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks. Kodpfx Aox N Dymohzjwt

Condition: excellent (used), Heidelberg Cylinder 56 x 77 Kjdpfxewzyg Hj Ahzowt

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. Kedpjwmy Riofx Ahzowt After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Kwjdpfx Aep H Swdjhzot Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. Kjdpfx Ajq Nd Rbjhzowt - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Quantity: 1 piece still available Kodpfsvpqpvox Ahzowt -Piston diameter: approx. 125 mm -Piston rod: Ø 85 mm -Stroke: 1000 mm -Total length retracted, center to center of hole: 1525 mm -Piston rod mounting: Ø 62 mm -Cylinder mounting: Ø 70 mm -Usable: universal -Dimensions: 1650/220/H150 mm -Weight: 140 kg

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders Kwsdpfjx Tqnrjx Ahzst -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Condition: good (used), Pneumatic cylinder holder, swivel flange, air cylinder holder, pneumatic piston holder, air piston holder -Type: SNGB-160 TN34547 -Quantity: 2 pieces available -Price: per piece Kodeb A Nv Sspfx Ahzewt -Weight: 3.3 kg/piece

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console - Front crankshaft support bearing - Overload protection via shear plate Kwjdpfxjxlkq Ie Ahzot - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet Kwsdpfxehlnzks Ahzot - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Year of construction: 1988, condition: good (used), machine/vehicle number: 11801, Gietz FSA 720 Foil/stamping embossing press. size 720x520 mm, minimum sheet size 297x210, Double sheet detection, pressure 120 t, max speed 5000 sheets/h, pile height 950 mm with max 700kg, pile height on delivery 700mm, dimensions of the machine 380x280x195 cm Machine no: 11801 Kjdpfjwnqrgjx Ahzjwt

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder, tie rod cylinder, tilting cylinder -Hydraulic cylinder: double-acting, stroke 175 mm -Type: unfortunately without a type designation -Piston rod: Ø 30 mm -Hole: Ø 20/16 mm / Retracted distance 325 mm -Dimensions: 365/70/H130 mm Kodpfex Sww Rox Ahzewt -Weight: 5.5 kg

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm plate thickness 6,0 mm Punching capacity 25 t Kwjdpfx Ahsuiz Iwezst punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm Equipment: - Tool changer with 20 positions - FANUC Series O-P control - Foot pedal - Operating instructions (English)

Condition: excellent (used), mileage: 1,047,944 km, power: 177 kW (240.65 HP), first registration: 12/2008, fuel type: diesel, tire size: 315/70 R22.5, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, total length: 9,110 mm, total width: 2,550 mm, loading space length: 7,240 mm, loading space width: 2,500 mm, loading space height: 2,350 mm, Year of construction: 2008, Equipment: ABS, cruise control, electric window regulation, fog lights, tail-lift, = Additional options and accessories = - (Roof) spoiler - Aluminum fuel tank - Radio/CD player - Side mirrors with electric adjustment - Side door Kjdpfxsx Uqzbj Ahzswt - Sun visor - Digital tachograph - Toolbox = Further information = General Information Cab type: single Registration number: BV-PT-65 Technical Information Number of cylinders: 6 Engine displacement: 7,146 cc Axle configuration Tire size: 315/70 R22.5 Brakes: disc brakes Front axle: Max. axle load: 7,100 kg; left tire tread: 20%; right tire tread: 20%; suspension: leaf spring Rear axle: Max. axle load: 11,500 kg; left tire tread: 20%; right tire tread: 20%; suspension: air suspension Weights Unladen weight: 8,560 kg Payload: 9,440 kg Gross vehicle weight: 18,000 kg Functional Tail lift: B.A.R. CargoLift Maintenance APK (roadworthiness test): valid until 04/2026 Condition Technical condition: very good Visual condition: very good Damages: none

Year of construction: 1986, condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Hydraulic cylinder: comes from a hydraulic press manufacturer MAE type HY-S63S pressing force 63 tons -Hydraulic cylinder: pressure piston stroke 690 mm -Piston rod: Ø 130 mm -Piston diameter: approx. 160 mm -Bolt circle: Ø 180 x 18 mm -Dimensions: Ø 270 x 1200 mm -Weight: 330 kg Kedoupbd Tepfx Ahzowt

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Hydraulic cylinder: tilt cylinder -Stroke: 135 mm -Piston rod: Ø 126 mm / mount Ø70 mm -Cylinder: outer Ø 155 mm Kodpfx Aog Akafshzewt -Hole: Ø 50 mm / Dimensions see photo technical drawing -Dimensions: 365/260/H175 mm -Weight: 39 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-40-105-PPV-A -Stroke travel: 105 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 x 1.25 Kwodog Twipjpfx Ahzet Quantity: 3 pieces Price: per piece -Dimensions: 270/55/H75 mm -Weight: 1.2 kg/pc.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders, lifting cylinders -Manufacturer: Schlie, hydraulic cylinder double-acting, stroke 147 mm -Type designation: LDG63 36 147 Kedpfshgr Rvox Ahzowt -Piston rod: Ø 36 mm -Sockets: Ø 35 mm -Cylinder: outside Ø 75 mm -Number: 2x cylinders available -Price per piece -Dimension: 530/75 / H150 mm -Weight: 10.7 kg

Condition: good (used), Starter motor, diesel engine, drive motor, marine diesel engine, diesel generator -Manufacturer: Bosch, starter motor from MWM RHS 518V16 generator -Type: Bosch Voltage: 24V 9PS -Teeth: 11 -Dimensions: 445/150/H210 mm Kjdjivfgbspfx Ahzewt -Weight: 26 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 22 mm -Diameter eyes: 30 mm -Piston rod thread: M18 x 1.5 -Stroke: 200mm -Quantity: 1x available -Price per piece -Dimensions: 445/90/H80 mm Ksdpfx Ahjd Evuzezowt -Weight: 6.7kg

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0500PPV -Piston: Ø 100 mm -Stroke: 500 mm -Pressure: max. 12 bar Kwjdpfedkzvtox Ahzot -Pneumatic damping: adjustable on both sides -Quantity: 1 available -Price: per piece -Dimensions: 138/H695 mm -Weight: 12.15 kg

Condition: used, fuel type: electric, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tipping cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder double-acting stroke 240 mm Kjdpsiy R U Esfx Ahzswt -Type designation: D0400250010260 T20 -Piston rod: Ø 25 mm -Recording. diameter 20 mm -Dimensions: 470/50/H80 mm -Weight: 5.2 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder, stroke 270 mm -Type designation: E030ZM60279 T24 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2 cylinders available -Price: per piece Kwjdpsizc Azsfx Ahzst -Dimensions: 470/50/H80 mm -Weight: 4 kg/pc.