Used Stavostroj Vp 200 for sale (16,434)

Condition: refurbished (used), Risco 200 litres mixer Product capacity 100 / 150 litres Twin paddle mix arms End door discharge Forward and reverse mix arms Refurbished condition Hjdpfxezmaahs Abrsnr

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw power chuck without step-jaw cheeks Manufacturer FORKARDT KTNCV 200-45, Three-jaw power chuck; the listed price applies to 1 three-jaw chuck. ----- Jaw stroke is achieved via clamping cylinder and draw tube. Chuck No. 1485270 with through-hole clamping. ----- Required cylindrical flange mounting according to DIN 55027 Short taper, taper size: KK6 ----- Three-jaw power chuck with quick-change system also suitable for reversible base jaws, type: FGB 200 ----- Jaw interface: Hnodpezrmzpjfx Abrsr Base jaw type: helical gear; Designation → Size: FGB200, SGB200 ----- Draw tube connection M52 x 2 mm Cylindrical mounting for spindle flange ø 170 x 6 mm Mounting hole circle for 3x cap screws approx. 135 mm ----- The chuck is in like-new condition. Weight without clamping jaws approx. 25 kg ----- Delivery without base and top jaws *We are available for any questions. *Shipping costs abroad upon request.

Condition: new, Year of construction: 2026, load capacity: 4,000 kg, lifting height: 20,000 mm, total length: 7,900 mm, Telescopic forklift JCB 540-200 Drive Diesel Year built 2026 Lifting height (mm) 20,000 Hnedeyq S Nqjpfx Abrsr Lifting weight (kg) 4,000

Condition: used, Year of construction: 2022, total length: 8,340 mm, - Arbeitshöhe 20 m - Bodenfreiheit (Zugang) 0.45 m - Plattformhöhe 18 m - Maximale seitliche Reichweite 11.57 m - Ãœberhang / Knickpunkt Gelenk 7.91 m - Korbarm-Drehwinkel (oben / Boden) +65 ° / -60 ° - Tragfähigkeit des Arbeitskorbs 250 kg - Drehung des Oberwagens 350 ° - Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° - Anzahl Personen (innen / außen) 2 / 2 - Gegengewicht Versatz (Oberwagen bei 90°) 0.61 m - Innerer Wenderadius 1.27 m - äußerer Wenderadius 3.78 m - Fahrgeschwindigkeit - Transportmodus 5.30 km/h - Fahrgeschwindigkeit - Arbeitsmodus 0.65 km/h Hodpfx Abjztf Tgoronr - Steigfähigkeit 40 % - Zulässige Neigung im Arbeitsmodus 4 ° - Bereifung Schaumgefüllt - Reifenmodelle 914 x 370 mm - Antriebsräder (vorne / hinten) 2 / 2 - Lenkräder (vorne / hinten) 2 / 2 - Gebremste Räder / Räder 0 / 2 - Batterie 48 V - Nennspannung der Batterie / Batteriekapazität 48 V / 460 Ah - Batterieenergie 22 kWh - Integriertes Ladegerät / Integrated charger 48 V / 60 A - Bodendruck 11 dan/cm2 - Hydraulikdruck 240 bar - Fassungsvermögen des Hydrauliktanks 24 l

Condition: like new (used), MAZAK INTEGREX i-200 5 Axis Mill Turn Machine Year 2017, Smooth Control Kitagawa BB08 chuck, SMV power steady. 658mm max machining diameter, 1519mm max turning length Renishaw Probing, swarf conveyor, A-Mist air filtration, FSE coolant filtration. Hnodpfx Aezilwwebrjr

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Hnedpfx Abszf Nccsrjr

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Hedpfozkvkqsx Abrsnr

Year of construction: 2013, condition: ready for operation (used), A complete gray fabric preparation and further processing line with butt seam sewing machine as well as an automatic double, folding and measuring system from MontiMac Italy is available. 1) Gray preparation line MontiMac model 1090, year of manufacture: 2013, material: cotton, fabric width range: 1800mm/3000mm, seam type: butt seam, material feed: pallets/bales, max. roll diameter: 500mm, sewing unit: TA21-3FY, cleaning brushes: 2. Including inspection table, brush cleaning unit, dedusting and fabric outlet. 2) Super automatic double, folding and measuring machine MontiMac Lafra 200TDD with pallet based design, double triangle usable width, machine usable width: 1600mm, max. fabric package folding height stacking height: 2000mm, max. table load: 1500kg. Including fold counter, control measuring system and length counter. 3) Butt seam sewing machine MontiMac TU03/105 with movable frame. Documentation available. On site inspection is possible. Hjdpfx Aeyhqcdjbrjnr

Condition: ready for operation (used), Year of construction: 2006, A semi-automatic tray sealer Multivac is available. Cycle performance: 3-12 tray cycles/min, max. tray dimensions X/Y: 380mm/300mm, max. tray height: 110mm, max. film width: 450mm, max. film diameter: 250mm, machine dimensions X/Y/Z: approx. 1500mm/800mm/1650mm, weight: approx. 300kg. An on-site inspection is possible. Hedpfexapg Rjx Abronr

Year of construction: 2009, condition: ready for operation (used), Clamping force: 2000kN, locking force: 2200kN, max. opening stroke: 570mm, min. mould installation height: 310mm, max. mould installation height: 660mm, max. distance between mould platens: 1230mm, mould platen dimensions: 830x830mm, distance between tie bars: 560x560mm, max. mould weight: 3.3t, max. weight on moving mould platen: 1.7t, max. weight on fixed mould platen: 2.5t, ejector stroke: 180mm, ejector force: 69kN, ejector return force: 31kN, screw diameter: 45mm, L/D ratio: 20, injection pressure at 400°C: 2402bar, shot volume: 358cm³, shot weight (PS): 330g, max. metering stroke: 225mm, max. nozzle stroke: 400mm, nozzle immersion depth (SVO): 20mm, nozzle contact force: 80kN, installed barrel heating capacity: 13kW, material hopper capacity: 70l, oil tank capacity: 500l, screw drive: 32kW, clamping unit drive: 32kW, pump unit power: 15kW, total installed power: 92kW, continuous sound pressure level: 74dB(A), length: 5700mm, width: 1700mm, height: 2200mm, weight: 11t, operating hours according to PLC: 36,734h, barrel heating: 25,665h, pump: 18,222h, documentation available. An on-site inspection is possible. A Wittmann robotic cell is also optionally available. Hnodpfx Aboy Tx Rbsror

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Hedpfx Abjtxb Avsronr

Year of construction: 1999, condition: ready for operation (used), A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible. Hnjdpfxsyn N Avo Abrjr

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Hedpfozhw S Rex Abrsnr

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Hodpfx Aoucfwpsbronr

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Hnedpstxquhjfx Abrer

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Hnedpfewhp Ndex Abrjr

Year of construction: 2024, condition: ready for operation (used), An almost like-new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital, operating hours April/2026: 481h. Documentation available. An on-site inspection is possible. Expected to be available from end of July/August 2026. Hsdjyyb Tlopfx Abrjnr

Year of construction: 1999, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Hnsdpfxey Sncqj Abror

Year of construction: 2001, condition: ready for operation (used), A hydraulic CNC press brake Hämmerle (M+S Brugg AG) is available. Press force: 2000kN, max. working length: 3100mm, max. stroke: 400mm, max. throat depth: 250mm, frame distance: 3240mm, max. opening width: 965mm, max. sheet thickness: 8mm. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/3400mm, weight: approx. 16600kg, control system: CNC Infinitron. Documentation available. An on-site inspection is possible. Hsdpozcyq Tefx Abrsnr

Condition: ready for operation (used), Year of construction: 2008, Two Meypack case packers from the same packaging line, one in left-hand and one in right-hand version, are available. Packaging type: WA carton, max. packaging capacity: 17cycles/min, infeed height: 1450mm, discharge height: 650mm, multipack length range: 200mm-600mm, multipack width range: 120mm-300mm, multipack height range: 80mm-350mm, blank length range: 360mm-1000mm, blank width range: 300mm-700mm. Machine dimensions X/Y: approx. 5000mm/2450mm, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Expected to be available starting end of July 2026. Hsdpfxsy Rtf Ij Abrsnr

Year of construction: 1983, condition: ready for operation (used), A rotary can seaming machine with double-seaming function CCC, which was overhauled by Schmalbach Lubeca, is available. Throughput capacity: 360cans/min, can height range: 77mm-285mm, stations: 6. An on-site inspection is possible. Hnsdey Ndfcepfx Abrjr

Year of construction: 2003, condition: ready for operation (used), A stationary and a mobile container emptying system (drum emptying) Netzsch are available. Drum size: 100l/200l, drive power: 15kW, max. delivery pressure: 8bar, delivery rate: approx. 1000l/h, speed: 1450rpm, max. liquid viscosity: 1000Pas. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm. Documentation available. An on-site inspection is possible. Hedpfx Absw R U Ayjrjnr

Year of construction: 2019, condition: ready for operation (used), Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible. Hnodpfxjwxd Uvs Abrsr

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Hedpfex Sywaex Abrjnr

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Hnsdpfxjw A R Spj Abrsr