Used Strapping Machines for sale (65,755)

Condition: used, Year of construction: 2001, 150 kg weight ca. 70 kg dimensions ca. 940 x 500 x 800 mm SEMI-AUTOMATIC Continuously adjustable strap tension: 5–500 N Up to 15 strapping cycles per minute Strapping triggered automatically when the strap is inserted or via foot pedal Cgjdpey Ihbfsfx Al Ijt Heat-sealed closure Load capacity: 150 kg Minimum product dimensions (W x H): 45 × 20 mm Height-adjustable · Ergonomic operation Clear control panel, · Easy operation from both sides No protruding controls · Strap tension adjustable via the keypad Finely adjustable strap tension from 5–500 N Strap widths 6, 9, 12 mm · Versatile application Easy access · Tape spool can be replaced quickly and easily The drive motor runs only during the strapping process · Energy-saving

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, Transpak TP 702, stainless steel, 8 mm strapping, arch 650 x 500 mm, performance 50 cycles per minute, automatic strapping feed and ejection, tension adjustable by potentiometer, activation by pedal or button. Cgedpoy Ncwdefx Al Iot

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, For sale: Strapack AQ7 with 1050 x 600 mm arch, 12 mm strap, output of 30 cycles per minute, automatic strap threading, adjustable tension by potentiometer, three-phase electrical supply. Csdsy Ncmlepfx Al Iogt

Condition: used, Year of construction: 1985, functionality: unexamined, -WKG 1021- A Titan strapping machine is being offered here. The functionality cannot be tested, therefore it is sold to hobbyists or for spare parts only. The dimensions of the strapping machine can be seen in the pictures. The machine manual and operating instructions are available. Technical data: Manufacturer: Titan Model: VK 10 Year of manufacture: 1985 Rated current: 2.5 A Rated voltage: 380 V / 50 Hz Csdpfxey Nav Rs Al Isgt Max. packaging size: 1200 x 600 mm

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, The fully automatic Strapex SMG 25 strapping machine was manufactured in 2022 and features an arch size of 1650 x 500 mm. It processes straps with a width of 12 mm. Activation can be performed via the additional foot switch or the integrated foot switch on the machine. Strap tension is adjustable up to approximately 450N. With height-adjustable feet, the working height can be comfortably set between 720 and 950 mm. Included is an additional roll of PP strap. The original price is approximately €19,500. The device has been function-tested and comes with an electrical safety check conducted by a certified electrical company. Cgodpeyuqnaofx Al Iet Loading by forklift is possible. Net price: €11,000 negotiable Price is subject to 19% VAT. Cash payment on collection is possible.

Condition: used, Year of construction: 2012, machine/vehicle number: 1020-12777, Strapping machine for sale Csdpey E Nrgefx Al Iogt

Condition: excellent (used), For sale: professional pallet strapping system from the renowned German company ErgoPack. Model 725E is a fully electric device that facilitates safe and fast pallet strapping without the need for bending down – ideal for warehouses, logistics, and production environments. KEY ADVANTAGES - Automatic strap guiding around the pallet - 24V electric control - AUTO, MANUAL, SOFT operation modes - Adjustable strap tension - Maximum tensioning force up to 2500N Csdpfx Aoyw Iagsl Ijgt - Ergonomic handling for operator comfort - Mobile, wheeled construction - Swiss quality craftsmanship (Swiss Made components) TECHNICAL DATA Manufacturer: ErgoPack Deutschland GmbH Model: 725E Power supply: 24V DC Max strap tension: 2500N Condition: used, in good technical condition Charger included CONDITION The device is complete. Shows normal signs of use from operation. Control panel works, the machine is ready for use. APPLICATIONS - Warehouses - Logistics centers - Production - Pallet transport and packaging

Condition: good (used), Year of construction: 2005, Construction site price: 3x automatic carton strapping machines, Mosca, RO-TR900-4 – used - : Price per unit: only €2,950 (net), ex location! Price when purchasing all 3 units ex location: €2,500 (net) / unit! Manufacturer: Mosca Model: RO-TR900-4 Year of manufacture: 2005 No. e.g. 78070 Channel size: Currently used strap type: Mosca 1255 Control voltage: 24V, DC Cedoy Aixhspfx Al Iogt 3L-N-PE, 400V, current type 3AC, 1.5kW, 2.5A Condition: good, since the site has not been used for a while the machines are a bit dusty Available: immediately Location: Heilbronn

Condition: used, DESCRIPTION : STRAPPING MACHINE BRAND MOSCA Cgsdpfx Aleq Dafpo Iet TYPE RO-M-P2 YEAR 1997 Max. boxes: 400 x 500 mm Electrical power:220 VOLT 0.5 Kw DIMENSIONS: 2300 x 1100 x 1800 mm

Condition: used, length ~ 450 mm width ~ 650 mm height ~ 1.100 mm Battery-powered hand strapping tool BW-03 with 2 x battery, charger and Cyklop dispenser and 2.5 rolls of strapping. Cgedjx R Ttlepfx Al Ist

Condition: good (used), Year of construction: 1997, I will sell Mosca RO-M-P2, good condition. Csdpfxov Uphuj Al Ijgt

Condition: good (used), Manufacturer: MOSCA, Model: RO-M-P2, Year of manufacture: 1997, Serial No.: 46957 Cgedjy Ez Tijpfx Al Ijt

Condition: repair required (used), Year of construction: 2006, functionality: limited functionality, type of input current: three-phase, SMB strapping tandem, year 2006, with parcel turner from 2010, three-phase power supply, operates with strapping band mm. Maintenance required: replacement of belts and conveyor bands on the strapping machines and belts on the parcel turner (the rollers show significant wear). There is a part to repair or replace on the compressed air cylinder (see photo). Cgedpfx Ajyybbvjl Iet

Condition: good (used), Year of construction: 2008, functionality: fully functional, For sale: Several Mosca strapping machines previously used by us for bundling plastic sheets. - All machines are in excellent technical condition. - Maintenance and spare parts were always carried out directly by Mosca Service. - The strapping process can be operated manually via foot pedal or electronically via signal/pulse. Available for sale: - RO-MP-4, year: 2002, frame height 400mm - RO-MP-4, year: 2003, frame height 400mm Cjdpfsxd T Nqox Al Ijgt - RO-MP-5, year: 2007, frame height 500mm - RO-MP-5, year: 2007, frame height 500mm - RO-MP-5, year: 2008, frame height 500mm - RO-MP-5, year: 2008, frame height 500mm Frame dimensions (measured internally): 500mm version: 660mm wide and 500mm high 400mm version: 560mm wide and 400mm high Shipping will be secured on a pallet. (Some of the machines have drill holes, as shown in the example photo, used to fix our retainers. These holes do not affect the functionality of the machines in any way.) For inquiries, please contact me by email so I can send you detailed photos of the specific models.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Mosca Fusion strapping machine, arch 600 x 500 mm, 5 mm strap, throughput 50 to 55 cycles per minute, automatic strap feeding and ejection, electronic tension adjustment via potentiometer. Machines are fully overhauled. Also available: Mosca ROM P5 strapping machines with 600 x 500 or 500 x 400 mm arches and Mosca ROM P4 with 500 x 400 mm arch from 2004. Cgjdpfxeyxmzle Al Iet

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 109767, Fully automatic longitudinal strapping machine, Mosca Evolution SoniXs TR-I 6 Pro, year 2015, 5 mm strap, throughput 35 strapping cycles per minute, ultrasonic sealing system, brushless motors, automatic strap ejection in case of end of coil or empty strapping, settings via touchscreen. Cedpeyxc Ubsfx Al Ijgt

Condition: good (used), Professional strapping machine from a renowned manufacturer, designed for high speed and trouble-free operation. - Up to approximately 30 strappings per minute. - Internal frame dimensions approximately 850 x 800 mm. - Secure strapping with 12 mm strap. - Automatic strap feed and strap return. - Adjustable strap tension. - Strapping can be triggered via hand button or foot switch, or alternatively, automatic mode selectable (sensor in the table top). - Simple and ergonomic spool change and threading system. - Equipped with ergonomic roller conveyors on the table surface. - Working height approximately 820 mm. - Machine can be moved and locked in place on castors. The machine can be demonstrated under power. Cedpfx Aljy Dvcis Iogt

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional Cjdpsukvgrsfx Al Isgt ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm Cgsdpfx Aljwd I Ido Ijt (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Csdst Uzv Tjpfx Al Iogt Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: used, Year of construction: 2015, functionality: fully functional, For sale is a maturation machine from the manufacturer Brüning Haus, year of manufacture 2015. Includes powered roller conveyors before and after the machine. The machine is used and is sold without warranty. Price reduced due to lack of space. Csdpfxjxy Nuns Al Iogt

Condition: good (used), Year of construction: 1997, Strapping machine, packaging machine -Semi-automatic: Pallet strapping -on: built-in transport frame -Voltage: 230 V -Dimensions: 650/800/H1250 mm -Weight: 102 kg Cgodpfx Asd R Ak Tol Ist

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, GIGANT / Mosca SoniXs-TR-6 Base – Fully Automatic Strapping Machine Professional Mosca SoniXs-TR-6 Base – the proven flagship from the German market leader in fully automatic strapping technology. Up to 35 packages/min with a 600 × 600 mm frame size. TECHNICAL DATA • Model: SoniXs-TR-6 Base Codpfx Aey Eqqujl Isgt • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 35 packages/min • Frame size: 600 × 600 mm • Conveyor speed: 0.1 – 1.0 m/s (infinitely variable) • Strapping: PP straps, width 5–12 mm • Control: MSCB-1 with digital control panel • Working height: approx. 850 mm EQUIPMENT & FEATURES • SoniXs ultrasonic technology – low emissions & energy-efficient • Standard-6 strap path system – tool-free maintenance • Pneumatic actuators for optimum strapping process • CE marked ex-works – ready for immediate use • Modular concept – can be expanded to tandem machine • Cost-efficient base version with proven mechanics • Optimized chassis – flexible positioning • Two separate control cabinets for extended applications • Pneumatic hold-down device available • Stop options for various applications • Volt-free contacts for line integration • Four swivel castors with locking brake SoniXs Ultrasonic Technology: The patented Mosca sealing system operates without warm-up time, requires minimal maintenance, and produces reliable, strong seals – unique in the industry. APPLICATION AREAS Perfect for: logistics, shipping departments, e-commerce, wholesalers, printing houses, pharmaceutical and food industries. Ideal for cartons, packages, and other packaging units requiring reliable strapping for transport. Application areas: high-throughput environments where process reliability and uptime are crucial. ABOUT MOSCA Mosca from Waldbrunn is Germany’s market leader in strapping technology and has been synonymous with the highest quality and reliability for decades. The SoniXs series is the flagship of fully automatic strapping machines. CONDITION & AVAILABILITY Fully functional, regularly serviced, and well maintained. Normal wear consistent with age, technically in excellent condition. Ready for immediate use – no hidden defects. LOCATION & TRANSPORT Location: Central warehouse Auction House Köck, 6178 Unterperfuss, Austria. Collection by buyer or shipping by freight carrier upon agreement. Transport costs on request (depending on destination). Viewing and test run possible by appointment. All information without guarantee. Subject to errors and typographical mistakes.

Condition: excellent (used), functionality: fully functional, GIGANT / Mosca SoniXs-MP-6 T – Automatic Table Strapping Machine (Premium Class) The automatic table strapping machine for demanding applications with a space-saving design. Up to 58 strapping cycles/min at 800 × 800 mm frame size. Ideal for integration into production lines. TECHNICAL DATA • Model: SoniXs-MP-6 T (table model) • Manufacturer: Mosca GmbH (Germany) • Year of manufacture: 2016 • Performance: up to 58 strapping cycles/min (with 5 mm strap) • Frame size: 800 × 800 mm • Strapping material: PP straps, width 5–12 mm • Sealing system: SoniXs ultrasonic Standard-6 • Operation: Continuously rotary control panel • Mobility: 4 castors (2 lockable) FEATURES & EQUIPMENT • SoniXs ultrasonic sealing system – low-maintenance & energy-efficient • Modular machine construction – flexibly extendable • Tool-free disassembly – easy maintenance • Automatic strap threading system • Front and side coil change • Programmable strap tension Codpsy Epq Hjfx Al Iogt • Stand-by function • Automatic strap end detection with strap residue ejection • DC drive technology with direct drives • Integrated strapping cycle counter • Quick-change coil system • CE marking included • Optional: narrow sealing head for particularly slim products APPLICATIONS Perfect for small to medium packaging volumes, workstations with limited space, and integration into existing production lines. Industries: printing, office supplies, electronics manufacturing, logistics, craft trades. Products: cartons, parcels, magazine bundles, catalogues. CONDITION & AVAILABILITY Fully operational, inspected and ready for use. Machine in very good condition with normal signs of use. Viewing and test run available by appointment. LOCATION & TRANSPORT Location: Central warehouse Auction House Köck, 6178 Unterperfuss, Austria. Self-collection or freight shipping by arrangement. Transport costs on request (depending on delivery address). Sale without roller tables. All information without guarantee. Subject to errors and misprints.

Condition: good (used), Year of construction: 2013, Strapex SMG65 strapping machine Serial: 651451 2013, high performance strapping machine designed for large and heavy packages, up to 65 packages per minute, mobile, 1Ph Cedpfswn Dm Dox Al Ijgt