Used Stud Welding for sale (5,695)

Condition: refurbished (used), Power rating at 50%: 25kVA Short-circuit current: 22,5kA Psdpfxey Ez Ige Adlogk Electrode force: 600daN weight: 51,5kg --- with Electrode arm 170mm optional till 800mm --- welding control MPS15036 --- warranty: 6 months

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm Podpfx Adeu A Thleljgk The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: new, controler for resistance weldingmachines Dalex Podpfsuqlz Esx Adlsgk T-8036 T-8036 S3 --- available from stock

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 16kVA Short circuit-current: 20,7kA Electrode force: 65-390daN / single stroke Throat depth: 200mm --- Weld control: MPS 10 (5-times, 8-program) --- Warranty: 6 months Pgsdpfey Ez I Hex Adlok --- Spotwelding electrodes + spare parts at stock

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Pgodpfexf Up Ijx Adlek

Condition: ready for operation (used), DMU 50V XYZ 500x380x380 Motor 15 kW 15000 RPM Table 800x480 24 tools Dimensions 2450x1800x2384 mm Weight 4000 kg Spindle new in 2026 Still in production Pgjdpsyyqu Sefx Adlok

Condition: good (used), Year of construction: 2016, Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine Psdpfxjyvz Ino Adljgk -Manufacturer: CEA, rocker arm spot welding machine type ZP 28 -Rated power: 25 kVA -Arm length: 550 mm, adjustable length -Operation: via foot pedal -Dimensions: 1050/330/H1270 mm -Weight: 152 kg

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, type of cooling: water, welding current (min.): 60 A, welding current (max.): 450 A, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled Specifications: 60-450 AMP 380 Volt Water-cooled 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: Pjdsyy Skuopfx Adljgk OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, type of input current: three-phase, filter area: 40 m², suction capacity: 4,000 m³/h, negative pressure: 2,500 Pa, Welding fume extractor, dust extraction unit, self-cleaning filter, pneumatic, vacuum type by TEKA. Pgedpfx Adsy Hhd Delsk Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. Fan power: 4 kW Capacity: 4000 m3/h Vacuum: 2500 Pa Filtration surface: 40 m2 Inlet diameter: 315 mm Device dimensions: Height - 2.50 m Width - 1.25 m Depth - 0.97 m Stock no. - 1116

Condition: used, filter area: 42 m², suction capacity: 1,750 m³/h, Suitable for welding, grinding, sandblasting, and all types of dry dust. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Fan power: 1.1 kW – single-phase Capacity: 1,750 m3/h Large filtration area – 42 m2 HEPA filter for precise air purification Mechanical spark arrester Stock no.: 1118 Pgodjy Hhcaspfx Adlek

Condition: excellent (used), Year of construction: 2019, operating hours: 9,058 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, filter area: 106 m², suction capacity: 7,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 Year of manufacture: 2019 The unit has 9,000 operating hours. Filtration area: 106 m² Fan power: 7.5 kW Pgsdpeydcygjfx Adlsk Capacity: 7,000 m³/h Inlet diameter: 315 mm Dimensions: Height: 3.38 m Width: 2.10 m x 1.15 m Stock number: 1105

Condition: used, Year of construction: 1975, Stock number: 2480 Manufacturer: Rade Koncar Pedpfornrtrex Adlegk Year of manufacture: 1975 Type: 2B-1 Device number: 75271 Welding current primary: 220 V 16 kVA 92 A 380 V 16 kVA 53 A Secondary welding current 220 V 100 A 380 V 200 A Equipment: mobile Dimensions: 500 x 700 x 600 mm weight: 120 kg

Condition: ready for operation (used), Perforated plate Manufacturer unknown Dimensions 1500x1500mm Working height 940mm --height adjustable-- Screwed feet Plate thickness 110mm Pgsdpfx Adjfpgp Eoljk Hole diameter 45mm Weight approx. 2.0 tons

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: water, welding current (max.): 400 A, Used – Esab Origo Mig 4002cw – Water-cooled MIG/MAG 3 Months Warranry Refurbished, tested, serviced, and ready for immediate use Pgodpoyyuzvsfx Adlsk Specifications: 400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Digital display Program memory Elektrode option Including: SB501W Welding torch, earth work cable, gas cable, and 1 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: repair required (used), Year of construction: 2002, Welding robot with 6 axes Pgedpfx Asywlgkedlsk Rotary table for workpiece holding 6th axis defective KPS module defective

Condition: excellent (used), Year of construction: 2004, Item designation: Welding fume extraction unit - Esta SRF K-10 FM BIA W2 Psdpfxoyz T Abo Adljgk ----- Condition of the item: The item comes from a company liquidation. Fully functional.

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Pgedpfx Aoyx Hpisdlok Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: F17/5BTZA1/A/01, arm reach: 800 mm, load capacity: 2 kg, empty load weight: 100 kg, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Reach: 800 mm Payload: 2 kg MACHINE DETAILS Control: Teach-in Pjdpoyuayljfx Adljgk Dimensions & Weight Dimensions (L x W x H): 1,200 x 800 x 1,300 mm Unladen weight: 100 kg Transport packages: 1 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Used Welding Cell / Welding Robot (MAG/MIG) – Immediately Available Manufacturer: TRUMPF Model: TruArc Weld 1000 Year of Manufacture: 2021 Standard Features: - Universal Robots UR10e - 3D welding table by Demmeler - Telescopic center separation - Linear axes - Fume extraction - Safety enclosure - Shielding gas connection - Compressed air connection Welding Source: - Fronius high-performance MAG/MIG welding source - Robotic welding torch - 3.25 m MIG/MAG robot torch package - Fronius wire feeder - Wire spool holders - Connection for wire drum Control System: - Robot controller with easy programming - Central control unit Operation: - Foot switch - Control panel for easy programming TECHNICAL DATA: Axis Data Type: Collaborative industrial robot arm Number of axes: 6 Reach: 1300 mm Repeatability: ±0.05 mm Welding Source Type: Fronius TPS 320i C PULSE Welding current range MIG/MAG: 3–320 A Dimensions and Weights Base version (without enclosure, cobot in transport position): 2540 × 2250 × 1600 mm Weight (base version): 1317 kg Cabin dimensions: 3605 × 2454 × 2818 mm Weight incl. enclosure: 2940 kg Working Area[1] Base version: Open area, therefore no physical boundary Enclosure with open center separation: 3200 × 1000 × 1150 mm Enclosure with closed center separation: 1600 × 1000 × 1150 mm [1] The actual component size depends on whether the cobot can reach the welding points. Typical maximum component sizes in the base version without safety enclosure can be, for example, 3000 × 600 × 600 mm or 3800 × 600 × 100 mm. If the part is welded in several steps, even longer components are possible. Data Transfer: - USB interface Safety: Podpfxey A Iixj Adlogk - Safety device - CE marking This used machine can be inspected under production conditions. All information is provided without guarantee – sale is without any warranty or guarantee. Subject to prior sale.

Condition: good (used), Stick electrodes 3.25 x 350 -Type: AWS: E 6013 -Analysis: C 0.07, Si 0.2, Mn 0.5% -Number: 23 packages available Pedpfob A Sf Tsx Adlogk -Price: per package -Weight per package: 4.3 kg

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman Dust Extraction System / Silo Dust Collector with Control Unit and Compressed Air Preparation Pjdpfx Ajyxvpfedlegk Condition: Very good, commissioned in 2023 and operated for only 2 years until 2025; dismantled due to plant closure Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems Design: Compact steel construction with integrated filter module Filter cleaning: Pulse-jet compressed air cleaning Installation type: Roof-mounted on silo Typical use: Industrial dust extraction, bulk material handling, environmental technology Fan Manufacturer: Nederman Model: FMZ 620 Year of manufacture: 2023 Power: 3 kW Explosion-proof design Control Unit Manufacturer: Nederman Model: DFC-08M Article number: 5512680 Year of manufacture: 2023 Pressure Vessel Manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Model: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum allowable pressure: 7 bar Permitted temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control Cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed Air Treatment: Camozzi MC202-D00 Max. input pressure: 16 bar Output pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB control/terminal box Version: Dust extraction system for silo applications with integrated filter unit and fan Accessories / Scope of delivery: - Electrical control cabinet with control system - Compressed air preparation unit with pressure gauge - Pressure vessel for pulse cleaning - Fan with motor - Pipe connection with weather protection grill - Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Pgjdpfxsw U Ezzs Adlok Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: used, functionality: fully functional, Miller Subarc DC 1250 Digital Welding Power Source Pgsdpfjy Azh Iox Adlok 1250A, 44V, 3-Phasefeatures digital controls

Condition: used, functionality: fully functional, machine/vehicle number: M.24277, pivoting range: 90 °, Bode 700VP Welding Positioner, 35 tonne capacity 360º table rotation Psdpfxey Azfyo Adlsgk 90º table tilt

Condition: used, Year of construction: 2016, functionality: fully functional, Nuova CMM MWB 12x6 NG Column & Boom Narrow Gap Welder (2016) 12,000mm vertical travel 6,000mm horizontal travel Pgjdpfxoy Azdpe Adljk 2x Miller Subarc DC1250 Digital welding power source, s/nos MF510181G & ME240505G Miller SubArc Interface Digital control box