Used Stud Welding for sale (5,804)

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Gjdpfeuy T I Hex Aqieuf

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Guedpeuy T Ndjfx Aqijf

Year of construction: 2018, condition: ready for operation (used), Three almost identical CNC plastic pipe butt welding machines (mirror welding machines) Hürner are available. Years of construction: 2x 2016 and 1x 2018, working range OD: 40mm-160mm, power: 2.85kW, reduction inserts: 40/50/63/75/90/110/125/140, weight: approx. 80kg. Documentation available. On-site inspection is possible. Guodpfxsviv Azs Aqisf

Year of construction: 2014, condition: ready for operation (used), A pneumatic Swiss-Sonic ultrasonic welding system is offered. 1) Swiss-Sonic UWP 20-1 ultrasonic welding press, year of manufacture 2014, max. pressing force: 3000N, min./max. welding stroke: 0mm/100mm, throat depth: 220mm, height adjustment: 300mm, max. operating pressure: 6bar, cylinder diameter: 80mm, compressed air connection: 8mm, working range: 220mm-520mm, footprint X/Y: approx. 650mm/450mm, machine dimensions X/Y/Z: approx. 430mm/600mm/1530mm, weight: approx. 150kg. 2) Swiss-Sonic ultrasonic generator. Including peripheral equipment. The images do not show the machine for sale. Documentation available. Inspection by appointment. Gjdezlt Rwspfx Aqijuf

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Gsdpfxoxddamo Aqieuf

Condition: ready for operation (used), Year of construction: 2020, An unused collaborative welding robot (cobot) Universal Robots with a Migatronic welding power source is available. 1) Cobot Universal Robots UR10, year of manufacture: 2020, load capacity: 10kg, reach: 1300mm, machine dimensions X/Y/Z: approx. 1600mm/600mm/600mm, weight: approx. 30kg, operating hours: 0h. 2) Arc welding power source Migatronic, year of manufacture: 2020. Documentation available. An on-site inspection is possible. Gusdpfxexddayo Aqiof

Year of construction: 2021, condition: ready for operation (used), A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment. Gusdpfx Aqoyugl Ujijf

Condition: ready for operation (used), Two identical welding rectifiers are available, standard: EN 60974-1, VDE: VDE 0544, mains connection: 3~/400V/50Hz, fuse protection: T25A, open-circuit voltage: 76V, max. welding current: 400A, protection class: IP23, insulation class: F, cooling method: AF-forced air cooling, weight: 214kg. An on-site inspection is possible. Guedpfx Aqozukrweijf

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, type of cooling: water, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use Godpozqywusfx Aqieuf 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2024, Miller XMT 450CC/CV 400 Volt 63 AH Wind Tunnel Technology™ Protects electronic components from dirt, metal dust, and humidity. Adaptive Hot Start™ Ensures perfect ignition properties and prevents the electrode from sticking. Safety shutdown and error indicator For example, in case of malfunction in the primary power circuit, secondary power circuit, or overheating. Special selection option for VS wire feeders on the process selector switch For all wire feeders that operate with welding voltage, a favorable constant current characteristic (CV) and welding current output are automatically activated. Gjdpfx Aszq Agfoqisuf Aluminum housing Lightweight, no corrosion in case of damage. Special arc control technology and Arcforce regulation Excellent control of the weld pool, even in the most demanding applications, especially for electrode types E 6010 and E 7010. Large LED display A/V Easy to read, option to preset welding parameters, hold function after the arc has extinguished. Arc cutting and beveling Due to high power and robust construction, very well suited for cutting and beveling operations. Parallel connection Two XMT 450 units provide 1200 A peak current. 14-pin remote control connection Remote control of welding current and welding current output. Applications Industrial applications Structural steel construction Shipbuilding Vehicle construction Rail construction Steel construction Pipeline construction Processes MIG/MAG welding SMAW (shielded metal arc welding) GTAW (gas tungsten arc welding) Flux-cored arc welding Beveling

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Gusdpfxey N Duqo Aqief Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP Gsdpfxozqc U Aj Aqijuf 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: Gujdpfxozqc Aas Aqijf SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Guodpfozp Dznjx Aqiof You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Gjdpfxjzrupzo Aqijuf Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Synchronous welding control 15036

Condition: excellent (used), pneumatically operated, water-cooled spot welding gun Manufacturer: DALEX, Type 3329 Nominal power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Electrode force: 440 daN Arm reach: 350 mm Arm spacing: 300 mm with double-acting cylinder, long stroke 60 mm, pre-stroke 40 mm, working stroke 0-20 mm Gjdpfxezrukle Aqieuf with universal joint suspension and mounting bracket 10 m connection cable and control cable with Harting connectors for connection to: Auxiliary control unit B 200

Condition: used, Ultrasonic welding machine, see images. Guedpfezcvuhex Aqisf

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Gjdjzrux Aopfx Aqisuf Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available.

Condition: excellent (used), Plate size: 1500 x 1500 mm Plate height: 100 mm Table height above floor: 950 mm Material thickness, approx.: 11.5 - 13 mm Bore diameter: 16 mm Weight, approx.: 397 kg Guodozn I T Sepfx Aqief

Year of construction: 2007, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Gedpfx Asnvfdusqisuf

Year of construction: 2002, condition: ready for operation (used), Working diameter: 1500-6000mm, working length: 1200-3000mm, wall thickness: 20-70mm. Gjdpjnvfdqjfx Aqiouf

Year of construction: 2011, condition: ready for operation (used), System includes (1) Industrial Robot KUKA KR 150-2 2000 (2) Spot Welding System SPATZ (3) Camera Inspection OMRON (4) Light Barrier SICK, operational hours counter: 2602h. Guodpfx Aogqkpmeqijf

Year of construction: 1978, condition: ready for operation (used), Suitable for PVC films, working width: 940mmm, welding power: 42kVA, welding area: 940x720mm², throughput: 400 cycles/h, length: 8000mm. Gsdpfx Aoqu Ubuoqieuf

Year of construction: 1990, condition: ready for operation (used), With MIG/MAG Welding System Messer Griesheim LG1200, including accessories, documentation and tests according to accident prevention regulations (UVV), an on-site inspection is possible. Gujdpeq Ttz Nsfx Aqijf

Year of construction: 2010, condition: ready for operation (used), Electrode force: 100daN, welding capacity: 255kVA, nominal input: 80kVA, with Cooling System DALEX DRF 5.2. Gusdpsiknv Eefx Aqief