Used Stylus Grinding Machine for sale (64,464)

Condition: used, Year of construction: 2006, - Max. working width: 1100 mm - 3 grinding units Grinding machine Manufacturer: CB Levigatrici s.r.l Type: Year of manufacture: 2006 Technical data - Max. working width: 1100 mm - 3 grinding units - Voltage/frequency: 400 V / 50 Hz - Total power: 48 kW - Rated current: 94 A Hsdpfx Aezuzcaohajt - Weight: 2460 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1998, - Belt width: 300 mm - Belt length: 1800 mm - Max. working height: 200 mm - Feed rate: 6 / 11 / 16 m/min Sanding machine Manufacturer: Löwer Type: DSM 3000 Year of manufacture: 1998 Dimensions, space requirements and weight Length: 2660 mm Width: 1020 mm Height: 1890 mm Space requirement: (for operation, tool changes, maintenance) Length: 2660 mm + 2 x workpiece length Width: 2100 mm Height: 2000 mm Weight: 1600 kg Technical data Belt width: 300 mm Belt length: 1800 mm Max. working height: 200 mm Sanding motor - Rated power: 2 x 7.5 kW Sanding motor - Rated current: 2 x 15.4 A Sanding motor - Speed: 2870 rpm Feed motor - Rated power: 0.25 / 0.55 / 1.0 kW Feed motor - Rated current: 1.0 / 1.9 / 2.6 A Feed motor - Speed: 700 / 950 / 1420 rpm Belt speed: 1300 m/min Feed rate: 6 / 11 / 16 m/min Brush motor - Rated power: 2 x 0.37 kW Brush motor - Rated current: 2.1 A Hodpfx Ahozuzbisaot Brush motor - Speed: 1405 rpm Brush length: 290 mm Brush diameter: 120 mm Height adjustment motor - Rated power: 0.37 kW Height adjustment motor - Rated current: 0.81 / 1.15 A Height adjustment motor - Speed: 600 / 2680 rpm Extraction Connection size: 2 x = 150 mm 2 x = 120 mm Airflow: 2515 m³/h Minimum air velocity at the machine connection: 20 m/s Negative pressure at the extraction port: 889 Pa Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hodovvkipepfx Ahast

Condition: used, Year of construction: 2022, Oscillating cylindrical grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. It uses something similar to a ProLoc device. Location: Nattheim. Hjdswhqprjpfx Ahaot

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. A device similar to the ProLoc system is used. Hjdpfxjwhqple Ahaot Location: Nattheim.

Condition: ready for operation (used), Year of construction: 1998, Available immediately ex works: Console milling machine REFORM Type UF 32 Year of manufacture 1998 Table 1400 x 300 mm Travel ranges X/Y/Z 1100/300/520 mm SK 50 Spindle speeds 31.5 – 1400 rpm Drive power 7.5 kW Digital display Hydraulic vice Hsdpezw Dymefx Ahajt Weight 2.7 tons Many tools and milling cutters included Price: Euro 2,500.00 plus VAT, ex works.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Verticale glass grinding line for max. glass sizes : 1500 x 3300 mm Hsdozvw Iuspfx Ahast 2 vertical glass grinding machines Bottero 111 F + Kuka robot + vertical glass wasching machine Bottero min. glass size : 200 x 300 mm

Condition: repair required (used), Year of construction: 1981, grinding length: 6,600 mm, grinding width: 300 mm, grinding height: 260 mm, table width: 550 mm, grinding spindle motor power: 52,000 W, We are offering this Göckel G 80 eL surface grinding machine, manufactured in 1981, which requires repair. Hodpfx Ajzvqh Ushajt Manufacturer: Gustav Göckel Maschinenfabrik GmbH D-6100 Darmstadt Machine type: G 80 eL Serial number: 6062 If you have any questions or would like more information, please feel free to send us a message or call us. - Grinding length: 6600 mm - Width: 550 mm - Magnet width: 300 mm - Grinding width: 520 mm - Grinding height: 260 mm - Grinding height at right angles: 150 mm - Grinding motor: 52 KW Please note: the machine is delivered without a water tank. Pumps, hoses, and accessories are included.

Condition: used, Year of construction: 1995, grinding length 600 mm grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal man. max. 750 mm horizontal table movement: cross max 340 mm sanding disc diameter 355 mm table load max. 420 kg grinding wheel width 50 mm bore 127 mm spindle turning speed range 1500 U/min Hsdezkv Ayspfx Ahaot rapid traverse vertical 400 mm/min weight of the machine ca. 2500 kg dimensions of the machine ca. ca. 2800x2000x1800 mm

Condition: excellent (used), 36" Magnetic Table# Model No 18 Hedpfxezh Ngmo Ahajt

Condition: excellent (used), Specification - Work head Maximum work piece weight between centres 100kg Speed range30/450 rpm Centre - standard/reduced to 5MT / 3MT Swivel angle, clockwise / counterclockwise 15° /90° Wheelhead (X axis) Maximum diameter ground: using a 350mm dia wheel - 300mm Using a 300mm dia wheel - 350mm Total infeed 245mm Maximum programmable dia infeed rate 100mm/min Minimum programmable increment (dia) 0.001mm Swivel range clockwise / counterclockwise 190° / 45° External grinding wheels Wheel size (left) 350 x 50 x 127mm Wheel size (right) 300 x 25 x 127mmm Spindle speeds 1775, 2068, 240rpm Motor 4kW Hedpfx Ahjzh Nfceaot Internal grinding wheels Wheel size 19 - 38mm Wheel spindle speeds 16500,24000,10500rpm Motor 2.2kW Table (Z Axis) Maximum grinding length between centres: 1300X - 700 - 700mm 1300X - 1000 - 1000mm Maximum traverse speed 5000mm/min Minimum programmable increment 0.001mm

Condition: good (used), PROTH PSGS-3060AH surface grinder Grinding surface: 300 × 600 mm Cross travel × longitudinal travel: 340 × 700 mm Spindle center height above the table: approx. 500 mm Table longitudinal feed rate: 1 to 25 m/min Standard grinding wheel: Ø355 × 25 × Ø127 mm Spindle speed: 1,500 / 1,800 rpm at 50/60 Hz Hodjzxg Uvjpfx Ahajt Spindle motor: 2.2 kW / 3 HP Net weight: approx. 1,650 kg Dimensions of packaged machine: approx. 2.28 × 1.74 × 2.06 m

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Hjdpfx Ajzwub Ushajt Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: excellent (used), Year of construction: 2011, Technical data: Grinding length: 400 mm Grinding width: 250 mm CNC control Handwheel Dimensions of table (magnetic plate): 400 x 200 mm Dimensions of grinding area: 400 x 250 mm Max. table load: 250 kg Distance table - spindle head: 540 mm Travel of spindle head: 220 mm Longitudinal travel of the table: 600 mm Dimensions of grinding wheel: ∅ 250 x 50 x 38 mm Motor power: 5.5 kW Dimensions (length x width x height): approx. 3000 x 2050 x 2550 mm Weight: approx. 3 tons Hjdpfjzwv R Dox Ahajt Condition: Overall in very good condition Operating hours: approx. 5,450 The seller is not liable for typographical or data transmission errors. The machine is in good optical and technical condition, with wear and tear appropriate for its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1950, width of the strips 150 mm band length 6680 mm volt 380 V weight 800 kg dimensions of the machine ca. 3,2x1,6x1,75 m Wood surface sanding machine Carriage length: table size 2500 x 800 mm Belt length: 150 x 6680 mm Manual processing table, adjustable Hedpfx Ahoua Ivceaet Table height adjustable

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Hodpfx Ahswgnz Asaot Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: used, Year of construction: 1988, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm Hjdpfx Aheu Rt E Tsast With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: used, Year of construction: 1990, working area D= 30 mm speed 20 m/min Bar length 3000- 6000 mm weight of the machine ca. 3 t Hedezl E Rcopfx Ahaot dimensions of the machine ca. 9 x 2 x 2,4 m Belt grinding line with 2 grinding units for pipes and bars. Surface of round material is grinded by through feeding.

Condition: used, Year of construction: 1982, grinding length 0600 mm grinding width 200 mm Hodpsu Rt Diofx Ahaot workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Year of construction: 1987, condition: used, A Studer CNC universal cylindrical grinding machine in need of repair is offered. Mains voltage/frequency: 380V/50Hz, control: Siemens SINUMERIK System 3, drive system: Siemens SIMODRIVE, measuring system: Marposs E5. Including various accessories. Documentation available. An on-site inspection is possible. Hodpfx Ahjzxhk Esajt

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Hjdpjzwk Udjfx Ahaet Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 1990, grinding diameter max. 1-150 mm regulating wheel width 100-200 mm weight 5 t Hjdpfx Ajztfz Dehaot

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm drilling length ca 165 mm lip angle 90-140 ° Hedpfx Asztfzwshast

Condition: used, Year of construction: 2005, grinding diameter max. 500-600 mm regulating wheel width 100-200 mm weight 5 t Hsdpfsztfzqsx Ahajt grinding diameter 1-150 mm grinding wheel width 150–250 mm mm with water treatment

Condition: used, Year of construction: 1980, centre distance 900 mm 440 Hjdpfoztfzkjx Ahajt weight of the machine ca. 3 t