Used Suction Sweeper for sale (3,073)

Condition: used, Year of construction: 2008, 1200 m³/h 1600 Pa 1,1 kW 24/50 V/Hz 750 x 700 x 1050 mm 90 kg Equipment: Ffedpjw Tngqofx Aa Eow - Hose arm 3 m, internal joints

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate Ffedpfx Aajhp S Tro Ejw - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) Fjdpfx Aokm Rynja Ejfw 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 400 V / 50 Hz < 75 dB(A) power capacity 15 kW volume capacity 20.000 m³/h weight 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of Fodpfxjppgd Ee Aa Eofw average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter area: 295 m² Dimensions: Width filter unit: 2,066 mm Depth filter unit: 1,756 mm Height of filter unit: 3,643 mm Dust container: 200 liters Version Sanders incl .: - NOVUS efficiency package FT20.000 - timer - NOVUS particle sensor

Condition: ready for operation (used), operating hours: 6,512 h, functionality: fully functional, mileage: 44,264 km, power: 55 kW (74.78 HP), first registration: 04/2016, overall weight: 3,500 kg, fuel type: diesel, color: traffic orange, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 05/2026, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 from 1st Owner Former municipal / authority vehicle 3-Broom Sweeping System Portal arm with weed control function Registered as a self-propelled work machine (40 km/h) Major engine inspection including timing belt, water pump, oil, and filters will be performed upon sale 6,512 total operating hours 3,767 sweeping operating hours 44,264 kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive system Waste container made of stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Permitted total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Engine: Water-cooled 4-cylinder VW industrial diesel engine Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake operated via foot pedal Cab with air-suspended driver’s seat Ffjdpfeyf Hihjx Aa Ejw Air conditioning / heating Water treatment system Hydrant connection Dosing system Permitted total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible with additional HAKO attachments such as sweeper brushes, snow plough, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale We sell exclusively under our General Terms and Conditions and exclude any form of warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 am to 5:00 pm. Saturdays by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle in part exchange. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The details provided above are non-binding; errors, changes, and prior sale subject to reservation.

Condition: ready for operation (used), operating hours: 6,288 h, functionality: fully functional, mileage: 63,760 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Sweeper Citymaster 1600 – One Owner Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with newly implemented drive pedal system. 2,998 sweeping hours 6,288 total operating hours 63,760 kilometers 4×4 all-wheel drive – hydrostatic all-wheel drive transmission Camera system with 270° panoramic view Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Permissible total weight: 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Travel speed: 0-40 km/h Working speed: 0-24 km/h Noise reduction package Selectable working RPM: 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emission Euro 5 compliant Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min, 225 bar - Circuit 2 (rear): 0–20/25/30 l/min, 195 bar Hydraulic service brake operated via foot pedal Cabin with air-suspended driver’s seat Fsdeyf E Tljpfx Aa Esfw Air conditioning / heating Water recycling system Hydrant connection Dosing system Perm. total weight: 3,500 kg Unladen weight: 1,950 kg Other applications possible through additional HAKO attachments such as broom, snow plow, and lawn mower (not included in the offer) Subject to errors, changes, and prior sale. We sell exclusively according to our General Terms and Conditions and under exclusion of any warranty. Subject to errors, changes, and prior sale. We are available Monday to Friday from 9:00 to 17:00 continuously, Saturday by appointment; appointments outside these hours can be arranged by phone. We are happy to accept your current used machine/vehicle as trade-in. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle inventory. The information stated above is nonbinding; errors/changes and prior sale reserved.

Condition: ready for operation (used), operating hours: 5,990 h, functionality: fully functional, mileage: 54,192 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,500 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweeper-Suction Machine from First Owner A major engine service with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Fodpsyf E E Isfx Aa Eofw Machine version with new drive pedal system 3,215 sweeping operating hours 5,990 total operating hours 54,192 kilometers 4×4 all-wheel drive – hydrostatic all-wheel propulsion Camera system with 270° panoramic view Stainless steel hopper Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight: approx. 1,900 kg Gross permissible weight: 3,500 kg Dimensions (L × W × H): 4,510 × 1,210 × 1,970 mm Driving speed: 0–40 km/h Working speed: 0–24 km/h Noise insulation package Selectable working rpm: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions Euro 5 Fuel tank capacity: approx. 60 L Hydrostatic all-wheel propulsion 2-circuit high-pressure hydraulics - Circuit 1 (front): 0–50/0–70 l/min at 225 bar - Circuit 2 (rear): 0–20/25/30 l/min at 195 bar Hydraulic service brake via foot pedal Cabin with air-suspended driver’s seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross permissible weight: 3,500 kg Unladen weight: 1,950 kg Other operational uses possible with additional HAKO attachments such as brooms, snow plow, and mowing unit (not included in scope of delivery) Errors, changes, and prior sale excepted. Sales are exclusively under our General Terms and Conditions and excluding all warranties. Errors, changes, and prior sale excepted. We are available continuously Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, appointments can be arranged by phone. We gladly accept your used equipment/vehicle in trade-in. Sales to trade/commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding. Errors, changes, and prior sale excepted!

Condition: ready for operation (used), operating hours: 6,510 h, functionality: fully functional, mileage: 58,574 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Suction Sweeper Citymaster 1600 from 1st owner - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be performed free of charge upon sale Ffsdpfx Aaeyf Eq Dj Eew - Machine version with new drive pedal system - 3,400 sweeping hours - 6,510 total operating hours - 58,574 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Camera system with 270° all-round visibility - Stainless steel debris hopper - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight approx. 1,900 kg - Permissible total weight: 3,500 kg - Dimensions (L x W x H): 4,510 mm / 1,210 mm / 1,970 mm - Travel speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds 1,600–2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low-emission Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive system - Dual-circuit high-pressure hydraulics: Circuit 1 (Front) 0–50/0–70 l/min at 225 bar, Circuit 2 (Rear) 0–20/25/30 l/min at 195 bar - Hydraulic service brake operated via foot pedal - Cabin with air-suspended driver's seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Unladen weight: 1,950 kg - Versatile applications with additional HAKO attachments such as broom sweeper, snow plow, and lawn mower possible (not included in scope of delivery) - Subject to prior sale, errors and changes reserved We sell exclusively according to our General Terms and Conditions (GTC) and under exclusion of any warranty. Subject to prior sale, errors, and changes reserved. We are available Monday to Friday from 9:00 am to 5:00 pm non-stop. Saturday by appointment. Outside these hours, appointments can be arranged by phone. We are happy to accept your current used machine/vehicle as part of the payment. Sales to commercial customers and exporters are given priority. This applies to our entire vehicle stock. All details above are non-binding; subject to prior sale, errors and changes reserved!

Condition: ready for operation (used), operating hours: 6,043 h, functionality: fully functional, mileage: 53,114 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 2,000 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Vacuum Sweeper—Single Ownership - Major engine service including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale - Machine version equipped with new driving pedal system - 3,131 sweeping operating hours - 6,043 total operating hours - 53,114 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system Fjdpoyf Ec Tefx Aa Ejfw - Camera system with 270° all-round visibility - Stainless steel debris container - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight approx. 1,900 kg - Permissible gross weight: 3,500 kg - Dimensions (L × W × H): 4,510 mm × 1,210 mm × 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low emission, Euro 5 compliant - Fuel tank capacity approx. 60 liters - Hydrostatic all-wheel drive system - 2-circuit high-pressure hydraulics: Circuit 1 (Front) 0–50/0–70 L/min at 225 bar, Circuit 2 (Rear) 0–20/25/30 L/min at 195 bar - Hydraulic service brake operated via foot pedal - Cabin with air-suspended driver’s seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible gross weight: 3,500 kg - Unladen weight: 1,950 kg - Other possible applications with additional HAKO attachments such as broom, snow plow, and mower (not included) - Subject to errors, changes, and prior sale We sell exclusively according to our terms and conditions and under exclusion of any warranty. Subject to errors, prior sale, and changes. We are available Monday to Friday from 9:00 am to 5:00 pm nonstop. Saturday by appointment; outside these hours, appointments can be arranged by phone. We are happy to accept your current used equipment/vehicle as trade-in. Sales to commercial customers and exporters are preferred; this applies to our entire vehicle fleet. All information above is non-binding; errors, changes, and prior sale excepted!

Condition: new, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Bema 20 BK Sweeping Machine / for Kramer 5040 / Year of manufacture: 2023 / New equipment / In stock & available immediately Price: €5,990.00 net / €7,128.10 gross - Working width: 1,250 mm - Own weight: 348 kg - Max. flow rate (l/min): 80 - Max. working pressure (bar): 180 - Hydraulic minimum output of carrier vehicle: 20 l/min - Dirt collecting hopper volume / weight: 135 l / 60 kg Equipment: - Water spray system (main sweeping roller, side broom) - Side broom We have a very large selection of various attachments in stock, available immediately! Mr. Herden (phone) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are the official sales and service partner for: - DMS - Gierking GMT - Holp - OilQuick - Westtech - Weber MT - Magni Telehandlers - Seppi M. - JCB Construction Machinery - Mercedes-Benz - Iveco In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. !!Subject to prior sale and errors!! Fjdsyii Urjpfx Aa Eofw Internal ID: 110181 = Further information = Intended use: Grounds maintenance Unladen weight: 348 kg Working width: 125 cm Please contact Marius Herden for more information.

Condition: used, Year of construction: 2011, operating hours: 4,500 h, mileage: 134,485 km, empty load weight: 15,000 kg, Operating hours: 4500, First registration: 25.05.2011_____VT 650 Single Year of manufacture 2011 - Kilometers: 134,456 km - Operating hours: 4,260 h - Wheelbase: 3,260 mm - Manual transmission - Sweeping function right - Rear view camera - High pressure system 100 bar/30 L - Spray bar behind suction shaft and high-pressure bar behind the middle sweeping roller - High-pressure lance with 15 meter hose - Convertible to dual operation, storage location: null Ffsdpfx Aastrquws Eow

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16.09.2019 Driving speed: 40 km/h - 4,000 kg permissible total weight Cab: Sound-insulated, vibration-dampened cab with entry on the right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning signal, engine tachometer, heating with 2-stage fan, heated front windshield with 2-stage intermittent wiper system, Radio/SD, work lights, seat belts for driver and passenger. Floor plates with metal grating, CAN View System with 7" color display and display of all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14) 2970 cm³, 4 cylinders, 62 kW/2,300 rpm, 270 Nm/1,350 rpm, common-rail. Exhaust system: DPF & DOC with SCR urea system, Ad-Blue tank 15 liters Suspension: Fully sprung with coil suspension and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake Sweeping suction container: Container Construction in DIN 1.4003 stainless steel, dumping height 1.50 m, 45° tilt angle. High-performance fan with a wear-resistant, self-cleaning impeller. chute at the container 200 mm Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swivel angle independently adjustable via joystick, front and side impact protection. Suction shaft: Continuously height-adjustable suction shaft on rigid rollers. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers single-color white, chassis, fresh water tanks, and container in grey. Tool kit consists of grease gun, wrench, screwdriver set Special equipment: - Right-hand drive (standard) Ffjdpfstuzqpsx Aa Ejw - All-wheel steering - Turning circle wall to wall 4,600 mm - Air conditioning with automatic climate control - Deluxe driver's seat, heated with lumbar support - Extended radio with Bluetooth - Hands-free telephone system - Blind spot mirror - Heated reversing mirrors left/right - Reversing camera system with integrated color monitor - Automatic central lubrication system (Interlube) - LED rotating beacon, foldable (instead of standard) - Airport rotating beacon, warning flashers (CAA spec CAP 168) - Optional third brush attachment - Mounting plate & high work lights right-oriented Location: 54595 Prüm

Condition: used, Year of construction: 2016, operating hours: 3,656 h, fuel type: diesel, color: white, empty load weight: 4,000 kg, next inspection (TÜV): 08/2020, front tire size: 0%, rear tire size: 0%, Operating hours: 3656, first registered: March 22, 2016, self-propelled_____Equipment: - Right-hand drive - All-wheel steering (turning circle diameter 3760 mm) - Coarse dirt flap - Poly/steel brushes (instead of standard) - Suction nozzle with castors (instead of standard) - Mounting plate: preparation for 3rd brush - Low water level indicator - Adjustable water valves on the front brushes - Deluxe driver's seat, heated with lumbar support - Radio extension with Bluetooth (hands-free phone) - Blind spot mirror - Heated rear view mirror left/right - Additional 99 dB (A) TÜV approval - Rear view camera system with integrated 7.0" color monitor - RKL, foldable, yellow LED (instead of standard) - High work lights, Storage location: 54595 Prüm Ffjdelz Iu Uepfx Aa Eow

Condition: used, Year of construction: 2024, operating hours: 775 h, power: 175 kW (237.93 HP), empty load weight: 16,000 kg, Operating hours: 775, First registration: 23.09.2024 Double-sided dirt pickup, towed Standard equipment Controls Main control panel mounted in the center of the cab with JVM for displaying information on a wide range of sweeper functions plus data download capability for recorded data. Additionally, images from up to four cameras can be displayed on the JVM screen. A separate control console with palm rest for controlling primary sweeping functions is mounted on the door side. Suction blower Variable suction speed from 1800 rpm to 3500 rpm for adaptation to different applications. V65t: Higher transmission ratio: 1.79:1 Disc brush (curb brush) Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cab). Highly visible signal yellow brush plate and hose guidance. Suction nozzle Suction nozzle made of cast aluminum with 250 mm diameter at the inlet and tool-free adjustment. Dust suppression system Spray heads for dust control are located at the suction nozzle(s), disc brushes, and along the front of the vehicle. "Pressadrain" water recycling system. EUnited 4-star certificate according to PM10. Electrics 24 V All external wiring harness connections comply with IP67 protection class requirements. External noise / sound power level LWA 108 dB(A) for standard power engines, measured in accordance with EC Directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured in accordance with EC Directive 2000/14/EC. Sweeping debris container The superstructure consists of a debris container and integrated water tank. Made from highly durable stainless steel. Watertight rear door locking system with safety lock and drainage function. Two side maintenance doors and lateral storage compartments. A water screen allows the debris container to be used as a large water tank for street washing. Rear discharge flap, automatic multi-stage debris container support, two protected rear rotating beacons, and LED work lights are part of the standard equipment. Container volume 6.5 m³ Discharge tilt angle 54° (nominal) Door opening angle 125° (nominal) Water tank The water tank with surge protection can be filled via a type 'A' hydrant. The double diaphragm pump is suitable for continuous operation and even dry running. Water volume 1545 l (optionally 2000 l) Exhaust hood The smooth-surfaced exhaust hood is lined with frequency-specific sound insulation. Ffjdpfx Asw Ehx Esa Eew Brushes Roller brush Ø 406 mm Roller brush width 1275 mm Suction nozzle width 750 mm Disc brush 500 mm (opt. Ø 650 mm) Special equipment - Superstructure with hydrostatic drive (V65h) and hydraulic auxiliary drive with HGB2 gearbox - Sweeping assemblies configured for right-hand operation - Pneumatic lifting and lowering of the air guide sieve in the dirt container - Pneumatic shaker device for the air guide sieve - Chain curtain in the dirt container in front of the air guide sieve - Water tank connection coupling type A, Storz 2 1/2 inch - Wastewater drain sieve with graduated perforation, mounted on the rear flap, allows for more efficient drainage of the dirt chamber (see PI611) - Mounting frame on the rear flap for attaching additional equipment - Additional spray nozzles on the rear side of the suction nozzle (Ni

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Operational condition: fully functional Diameter: 1000 mm Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Permitted operating temperature: -10/+200 °C Support structure: upright on legs with subframe Opening: hydraulic opening assistance Ffedou U Afuspfx Aa Ejw Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Condition: new, volume capacity 1600 m3/h feed volume 99,9 % length 3.000 Absaugschlauch mm motor 230 Volt motor 1,1 KW weight 80,0 kg range L-W-H 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class "W3" (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications Ffsdpfxsxaal Re Aa Eow - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surcharge (recommended) - Retrofit kit STAVO (dust pre-separation) - for FILTOO with spark protection and collecting tray Note : - The device is only used to extract dry dust / smoke - Read the operating instructions before using for the first time

Condition: good (used), Vacuum cleaner motor, suction turbine, wet vacuum cleaner -from: scrubbing machine make Gansow -Number: 17x available -Price: per piece -Dimensions: Ø 145/H210 mm Ffsdpfx Aaodwdrhe Eew -Weight: 2.7 kg

Condition: good (used), Year of construction: 2005, Vacuum cleaner motor, suction turbine, wet vacuum cleaner, suction motor Fedpjk D Nt Iofx Aa Eefw -Manufacturer: Ell, suction motor from scrubber dryer Gansow 70 BF 70 -Type: 500W -Voltage: 24 V -Quantity: 1 available -Dimensions: Ø 147/H210 mm -Weight: 2.8 kg

Condition: used, Vacuum lifter, vacuum lifting device, vacuum suction device, plate lifter, vacuum lifting frame -Suction surface: Ø 66 mm -Price complete -Quantity: 150 pieces -Dimensions: O 66/29 mm Ffsdpjghigrefx Aa Ejw -Weight: 0.03kg / piece

Condition: used, Front broom, front sweeper, roller brush, broom -suitable for: Kramer Tremo, Multicar, Iseki, Hako and other tractors -was in use: at Berlin Airport Ffsdpfx Aajb I Iife Eew -PTO drive: -hydraulic: swiveling -Admission: three point -hydraulic: swiveling -Broom width: 2000 mm -Dimensions: 2100/1070/H1060 mm -Own weight: 310 kg

Condition: used, Laboratory fume cupboard, fume cupboard, suction Fedpfxob Uhkgo Aa Esfw -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 31 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Transfer: in the current condition as seen -Vacuum suction cup: with damage -Version: with vacuum suction cup, equipped with directional valve and induction knife for the stroke -Stroke: 70 mm -Sucker: Ø 125 mm -Piston rod: 20 mm Fjdpob R Ac Uofx Aa Ejfw -Total length: 420 mm -Total length extended: 490 mm -Number: 31 pieces available -Price per piece -Dimensions: 420/140/120 mm -Weight: 4 kg/piece

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm Fodeb Uhkfspfx Aa Eefw -Weight: 32 kg

Condition: ready for operation (used), Main pipe connection diameter: 120mm, pressure difference: 8000Pa, volume flow: 1200m³/h, connections: 3, container volume: 175l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2300mm. An on-site inspection is possible. Fjdpfxoxph Rtj Aa Eefw

Condition: ready for operation (used), Year of construction: 2010, An oil and emulsion mist separator Umwelt Lufttechnik is available. Extraction capacity: 1200m³/h, fan capacity (free-blowing): 2000m³/h, negative pressure: 850Pa, min. separation efficiency: 99%, machine dimensions X/Y/Z: approx. 700mm/500mm/1150mm, weight: approx. 100kg. An on-site inspection is possible. Fsdpfx Aaexnp Spo Eefw