Used Swing Cut Scissors for sale (20,080)

Condition: excellent (used), Cross-cut saw Cutting height 200mm Cutting width 200mm 2 x 35kW vertical saws 2 x 35kW horizontal saws Feed rate 10-40 m/min. Hodpfxowhn Ews Addong

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Technical Specifications Hedpfx Adjxt Hz Ssdeng Travels (X / Y / Z): 350 × 250 × 256 mm U / V Axis Travels: ± 70 mm Max. Workpiece Dimensions (LxWxH): approx. 750 × 550 × 250 mm Max. Workpiece Weight: approx. 450 kg Table Size: 620 × 400 mm Wire Diameter: 0.15 – 0.33 mm (commonly 0.25 mm) Max. Taper Cutting Angle: ± 30° at 100 mm height Positioning Accuracy: ± 2 µm Psw N Hjxdubzjl Icsrb Wire Threading System: Fully automatic, fast, reliable Generator: Intelligent GF AC Cut, real-time spark control Surface Finish: up to Ra 0.1–0.2 μm (after finishing cuts) Control System: AgieVision (ergonomic, touch display, 3D graphics) Dielectric: Deionized water Machine Dimensions (LxWxH): approx. 2200 × 2200 × 2200 mm Machine Weight: approx. 3500–4000 kg

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: PAR01/09/2009, cutting height (max.): 100 mm, total width: 5,000 mm, total length: 10,000 mm, total height: 2,400 mm, overall weight: 4,000 kg, cutting width (max.): 260 mm, saw blade diameter: 500 mm, cutting length (max.): 3,000 mm, type of input current: three-phase, input frequency: 50 Hz, air pressure: 6 bar, saw blade bore: 40 mm, The PAR01/09/2009 Automatic Cutting Saw is a heavy-duty industrial machine designed for precise and efficient cutting of materials within a broad size range. With a robust construction and a total weight of 4,000 kg, the saw ensures stability and vibration-free operation during high-speed cutting tasks. The machine supports materials up to 3000x260x100 mm, while also allowing safe processing of smaller workpieces starting from 1000x35x10 mm. Its high travel speed of 700 mm/s and cutting performance of up to 440 mm/min make it suitable for demanding production environments requiring continuous and accurate cuts. Equipped with an automatic material feeder Hnodjx Tpvhjpfx Addeg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece weight (max.): 200 kg, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 2,455 mm, total length: 3,000 mm, total width: 3,760 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, type of input current: three-phase, overall weight: 3,700 kg, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, Equipment: cooling unit, documentation/manual, Wire EDM system GF AgieCharmilles CUT 2000 with loading robot Power on time: 91,716 h Operating hours: 17,889 h Hodpfex S Ehksx Addjng The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 with integrated automation/loading robot (WorkPartner) and is ideally suited for precise series and single-part production. The CUT 2000 is designed for highly accurate contour cutting with excellent surface quality and stable process control. It features the Vision-5 control unit (Windows XP), automatic wire threading system, integrated dielectric unit, and coaxial flushing, enabling reliable, low-manned operation. The loading robot (GF WorkPartner) transforms the machine into an automated production cell. Depending on the magazine version, workpieces weighing approximately 400 to 800 kg in total can be handled. Automatic loading and unloading allow for extended run times without operator intervention and significantly increase productivity.

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm Hsdpfexqh Sajx Addeng maximale snelheid: 25 m/min frequentiegestuurd 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 260105, saw blade diameter: 800 mm, overall weight: 2,960 kg, table length: 700 mm, Equipment: CE marking, TECHNICAL DETAILS Min. saw blade diameter: 790 mm Max. saw blade diameter: 800 mm Spindle saw blade diameter: 40 mm Infeed table length: 700 mm Hnsdpfx Adoxq Au Asdeg Outfeed table length: 700 mm MACHINE DETAILS Main motor power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,550 x 2,100 mm Weight: 2,960 kg EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Hnodpextfwxefx Addeg Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 56 m/min, feed length X-axis: 560 mm, feed length Y-axis: 360 mm, feed length Z-axis: 480 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 56 m/min, Make Hyundai Wia Model i-Cut 380 MD Year of manufacture 2018 Control system Siemens 828 chop-mill and 3D simulation Pallets 2 Palette size 650x400 mm Pallet load 250 kg Traverses X/Y/Z 560/360/480 mm Rapid feed X/Y/Z 50/50/56 m/min Spindle speed 24,000 rpm Spindle power 10.5/8 kW Tool taper BT 30 Big plus Number of tools in the magazine 20 pcs. Machine dimensions LxWxH 2.0x2.7x2.85 m Length: X-way 2.0 m Width incl. chip conveyor 4.1 m Machine weight 5200 kg Hnodpfx Aow T Rv Ioddsg Equipment: Chip conveyor with drum filter, swivel, pallet changer, Fixture plate with reference holes.

Condition: good (used), Year of construction: 2017, MTRent MT CUT V 110 Y - 12 TH, year of manufacture 2017, Heidenhain iTNC 530 control, travel X/Y/Z 1100/610/610 mm, 30-position tool changer, SK 40 spindle taper, internal high-pressure coolant (IKZ), 3D measuring probe, table size 1250 x 610 mm, spindle speed up to 12,000 rpm, machine weight 7,500 kg. Hnedpfx Ajx A Txisddog

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 600 mm, cutting height (max.): 160 mm, cutting width (max.): 610 mm, power: 0.01 kW (0.01 HP), Extreme robustness and maximum power! The Legend_600 has a completely painted, thick and reinforced steel structure. The blade with a diameter of 600 mm, the power of 9.2 kW and the rotation speed of 2750 rpm make it the ideal machine for those who work with wood up to a maximum of 150 mm thick and 610 mm wide. Hedpefcdnlofx Addsng

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,154 mm, total length: 2,050 mm, total width: 2,234 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 800 mm, overall weight: 2,450 kg, warranty duration: 6 months, GF Machining Solutions CUT P350 Year of manufacture: 2020 AC CUT HMI-2 control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 800 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.15 mm to 0.33 mm Overall system dimensions: 2050 x 2234 x 2154 mm Hnodpfx Adoxywz Aodeg Total system weight: 2450 kg The machine will be cleaned, completely overhauled, and tested for all functions by us after receipt of order. We are pleased to offer you commissioning of the machine as well as operator training on the control system.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 4,250 mm, cutting height (max.): 120 mm, cutting width (max.): 4,100 mm, main saw diameter: 460 mm, power: 21 kW (28.55 HP), Machine type: fh6 430-410 / HT220 / MCS-Evolution / Win 10 Cutting length: 4,250 mm Cutting width: 4,100 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 125 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pcs. (2100 x 700 mm) Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Automatic cutting length adjustment Scissor lift table: - Panel width: 2200 mm - Platform - Hydraulic unit - Max. Load: 6,0 tons Hnedpfolni T Eex Addog - Push-off trolley - Rack and pinion drive - Frequency converter driven - Drive shaft - Push-off device: - Quantity: 2 pc(s) - For panel thicknesses ≥ 6 mm - Probe spindle for automatic package height adjustment - Floating - Cross alignment stop at the roller table - length: 1450 mm, measured from the saw line - solid box-type steel welded construction - alignment stop surface is precision machined - Book aligning device for longitudinal board edges - Quantity: 2 pc(s) - For pusher infeed - Raise- and lowerable aligning dog - Pneumatic operation - Counterholder: - Quantity: 2 pc(s) - For board thicknesses ≥ 6 mm This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Hjdpfox Ectuex Addjng

Condition: excellent (used), C.N.C. WORKING CENTER 4 axes (X-Y-Z-C) Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP / IMATRONIC - BIMA Fast Cut Working table with pods and rails. No. 8 Supports (rails) of length mm 1400 Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 4200 x 1600 x 60 Min. workpieces dimensions (X - Y - Z) mm 295 x 115 x 14 Hnjdpfx Aovxhnusddeg Max. workpieces dimensions (X - Y - Z) mm 4250 x 2200 x 60 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 28 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 14,5 (S6) / Kw 7,5 (S1) N° 3 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) N° 5 Air cushion tables (for the panel parking before being processed) Vacuum system with suction cups (controlled by CN) to lift panel onto outfeed belts Workpieces Outfeed system (from Bima Cut) with system with motorized belts

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: NOH328/04, Technical data: 1 ABUS VS column-mounted slewing jib crane, SWL 500 kg Rated load at full outreach: 500 kg / 0.5 t Height: approx. 3.4+0.9 (column extension) = 4.3 m Underside of jib: approx. 3.9 m Outreach: approx. 6 m Hook height: approx. 3.4 m Total weight: approx. 900 kg Incl. newer Abus chain hoist 500 kg (year 2016) Slewing range 360°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, lifting capacity 80–5000 kg, please inquire See pictures Shipping by freight forwarder or collection by appointment only Hnjdpfx Adsx Exczjdsg

Condition: new, Centauro BETA 3 Axis CNC Swing Chisel Mortiser A new fully programmable 3 axis horizontal CNC swing chisel mortiser suitable for general joinery and furniture production. By a combination of automatic movement of the mortisting head in the x axis and an automatic gripper that positions the timber no manual movement or handling of the component is required other than loading and positioning the timber against the pneumatic reference stop and then unloading when the mortising cycle is finished.The complete movement, clamping and mortising cycle is fully automatic. X,Y and Z axis movements are all via re-circulating ball and screw drives and using linear slideways to give maximum positioning accuracy. Thanks to the programmable Z axis it is possible to produce off line mortises, double mortises or produce thicker mortise slots with the same chisel. Programming is very simple thanks to the 'user friendly' graphic touch screen controller were programs can be memorised and stored under a number or specific name up to 8 characters. The swing chisel cutter itself produces a very clean mortise slot and if required for deep mortises upto 3 depths of cut can be programmed to give a 'woodpecker' type cutting operation. Other programming options include working off either the face of the timber or the thickness and the possibility to produce mirror image components (left/right hand) in one program. On request the machine can be equipped with a separate dedicated programmable hollow chisel head for producing the small mortise holes for glazing bars. Alternatively a horizontal milling head can be specified that can be used for hinge recessing, slotting for louvre doors etc etc. X axis stroke 1100mm. Y axis stroke 250mm. Max. depth of cut 120mm (depending on chisel size) Z axis stroke 100mm Max. workpiece height of 120mm. All movements on re-circulating ball and screw drive with brushless motor Max. workpiece width 200mm (wider on request). Max. swing chisel thickness 20mm. Min . slot length 25mm approx (with swing chisel) Min. slot thickness 6mm. 3 vertical pneumatic clamps. 3 horizontal pneumatic clamps. 4 hp main motor. 'Power 1000' touch screen graphic controller with 99 programs each with 50 lines. USB key facility. Programmable speed for cutting depth. Hnsdpfx Adob Tmpqodog Anti splinter guards with air blowers and dust extraction points.1 x 80mm 1 x 60mm dia. Working table dimensions 1210mm x 215mm Installed power 3.6kw. (std machine) Air supply 6 bar / 470 l/min consumption.

Condition: excellent (used), Year of construction: 2008, cutting length (max.): 4,250 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.250 mm Cutting width: 4.300 mm Year of construction: 2008 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 300 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: up to 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Clamp opening: 90 mm Push-off trolleywith 2 pcs. Push-off devices Book aligning device for longitudinal board edges Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Spindle lift table: - Panel width: 2200 mm - Integrated roller conveyor Feeding roller conveyor: - Length: 4600 mm - Width: 2200 mm - Transport direction longitudinal - Recesses for forklift trucks This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! Hedpfeqi Azpjx Addong

Condition: excellent (used), C.N.C. WORKING CENTER with 4 axes (X-Y-Z-C) for routering, boring, cutting and edge banding Goose-neck type, with Numerical Control ICOS-Open. Software IMAWOP + IMAwinCAD Working table with pods and rails. No. 6 Supports (rails) of lenght mm 1450 - DYNAPOINT Automatic deplacement by CNC (X axis) of the Supports/rails Automatic deplacement by CNC (Y axis) of the vacuum pods/cups Automatic Tools Changing System. Tools storage plate (No. 18 folds- positions) Max. useful working area (X - Y - Z) mm 6300 x 1450 x 100 Min. workpieces dimensions (X - Y - Z) mm 320 x 115 x 14 Max. workpieces dimensions (X - Y - Z) mm 5600 x 2100 x 38 Motorized carpet to evacuate chips and wastes Separate electric and command cabinet. Total installed power (Kw) 34 WORKING GROUPS (TOP): Vertical electro-spindle 1 x HSK F63 - electro-spindle motor power Kw 18 (S6) Circular Grooving Saw (90°) diam. (mm) 200 Edge Banding unit (always ready on board) - VT 100 Edge coils supporting unit (No. 2 reels) Hsdpfx Astixpujddsng Combined aggregate (Flush-Trimming/Scraping) Workpieces Infeed system (to the Bima Cut) with Brush Table N° 6 Clamps to fix the panel and move it on to the machine (on top of the vacuum pods) Workpieces Outfeed (from Bima Cut) With motorized Rollers + Angular Transfer System

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Hjdjdy Hrdspfx Addsng Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 5,750 mm, cutting height (max.): 120 mm, cutting width (max.): 2,600 mm, main saw diameter: 460 mm, power: 27 kW (36.71 HP), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5.750 mm Cutting width: 2.600 mm Year of construction: 2007 Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 27 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 125 mm Lifting / lowering device for clamps Strip aligner before and after the pressure beam Air cushion tables: 1 pcs. (2100 x 700 mm) Turn table: 1 pcs. (5800 x 2200 mm) 90° turnable Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Machine table lips Automatic cutting length adjustment Lift table, max. panel width: 2600 mm Feeding roller conveyor: 7100 x 2600 mm Recesses for forklift trucks: 2 pcs Frequency converter for feeding roller conveyor Positioning stop: 2 pcs Push-off trolley Push-off device: 3 pcs Book aligning device for longitudinal board edges: 3 pcs Retaining device: 3 pcs Roller table Cross alignment stop at the roller table This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! Hnodpfxovx Ru Ds Addjg (displayed photos are symbol photos)

Condition: new, Automatic hopper feeder and loader 1350mm length capacity (longer on request) Adjustable feed stroke- pneumatic / mechanical - standard model Piece positioning device with double pneumatic clamps. 3KW motor with 500mm blade. 2800 rpm. Mechanical blade angling 0 degrees / + / - 60 degrees. Hsdpon Nv Tiefx Addsng Minimum infeed length 200mm / maximum 1350mm. Minimum section 20mm wide x 10mm thick / maximum 200mm wide x 100mm thick Movement / feeding of timber adjustable 1 to 395mm PLC control Maximum production 500 - 800 pieces per hour (depending on length of cut). Pneumatic head stroke. CE safety enclosure. Overall dimensions 2450mm x 1000 x 1900mm.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, saw blade diameter: 460 mm, sheet thickness aluminum (max.): 100 mm, total length: 6,515 mm, total width: 7,114 mm, total height: 2,269 mm, type of input current: AC, overall weight: 7,000 kg, section length (min.): 45 mm, section length (max.): 3,100 mm, working height: 970 mm, input voltage: 400 V, year of last overhaul: 2025, saw drive: 27,000 W, operating pressure: 6 bar, input current: 66 A, sheet thickness brass (max.): 100 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Schelling fm6 330 Precision cut-to-size saw for aluminum, non-ferrous metals, plastics and composites Year of construction: 2011 Operator software: Schelling MCS Evolution Operating system: Windows Control system: Siemens Cutting length max.: 3.333 mm Cutting width max.: 3.300 mm Cutting height max.: 100 mm Saw blade projection max.: 135 mm Saw blade diameter max .: 460 mm Saw blade rotation speed: 3.500 rpm Main saw motor: 27 kW Saw aggregate forward: 0,1 up to 80 m/min Saw aggregate backward: up to 80 m/min Feeder reverse: up to 30 m/min Feeder forward: up to 25 m/min (Europe: acc. EN 1870-13) Number of material clamps: 8 pcs. Clamp opening max.: 133 mm Strip aligner before and behind the pressure beam Automatic cutting length adjustment Grooving device Synchronized sawing and –scoring Central cleaning system – saw machine Minimum lubrication system for saw blade with 2 nozzles Air cushion tables: 2 piece 2.100 x 700 mm Air cushion table no. 3 is available optionally Hjdpfx Asx Hynbsddeng This machine is in very good condition and in perfect working order. The machine has been refurbished, inspected and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: used, Year of construction: 2002, functionality: unexamined, cutting height (max.): 100 mm, cutting length (max.): 3,230 mm, power: 21 kW (28.55 HP), cutting width (max.): 3,100 mm, main saw diameter: 450 mm, Machine type: FLM 330-310 / MCS-F Cutting length: 3,230 mm Cutting width: 3,100 mm Year of construction: 2002 Saw blade projection max .: 130 mm Saw blade diameter max .: 450 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 100 mm Package height min .: 10 mm Saw aggregate forward: 0,2 up to 50 m / min Saw aggregate backward: up to 50 m / min Feeder: up to 25 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 130 mm Strip aligner before and after the pressure beam Air cushion tables: 2 pcs. (2200 x 700 mm) Roller table: Cross aligning device in the roller table Cross alignment stop at the roller table Machine table: Hnjdpfeww Hk Rsx Addog heavy-duty steel construction machine table surface is precision machined Brass table lips Automatic cutting length adjustment Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2011 Saw blade projection max. (0°): 72 mm Saw blade diameter max .: 350 mm Main saw motor: 14 kW Scorer aggregate Scorer saw blade diameter max .: 180 mm Scorer aggregate, manually adjustable Package height max. (0°): 60 mm Saw aggregate forward: up to 100 m / min Saw aggregate backward: up to 100 m / min Feeder: up to 120 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 6 pcs grip push clamp Regulation of clamp force at control desk stepless Number of stop jaw: 2 pcs Clamp opening: 82 mm Strip aligner before the pressure beam Hnedpek T Aw Sjfx Addjg Air cushion tables: 3 pcs. 1800 x 600 mm Angular cutting device WSA Motor-driven cutting height adjustment for the main saw, infinately Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Formatting device This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans s45 420 Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2005 Saw blade projection max. (0°): 70 mm Saw blade diameter max .: 350 mm Package height max. (0°): 60 mm Package height max. (45°): 38 mm Main saw motor: 7,5 kW Scorer aggregate Saw aggregate forward: up to 60 m/min Saw aggregate backward: up to 60 m/min Feeder: up to 60 m/min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Number of stop-jaws: 1 pcs Air cushion tables: 3 pc(s). 1800 x 600 mm Angular cutting device (WSM) This machine is in very good conditions and works very well. The machine will be maintained, checked and tested in our company. Hsdsit N S Nspfx Addjng Errors and alterations in the technical datas and informations excepted!