Used Swm Milling Machine for sale (64,510)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp Giedjydmu Ujpfx Aaden

Condition: good (used), Year of construction: 2001, CNC bed type milling machine Fabr.IBERIMEX-MVR Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Giodpfx Aaed Eranedjn Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Machine card see more data. Machine in good condition.

Condition: good (used), Year of construction: 1995, Universal milling machine, make AUERBACH, type: 315 FUW, year of manufacture 1995 with 3-axis digital display HEIDENHAIN, hydraulic tool clamp, machine vice tool holder, counter holder for horizontal milling, coolant system, machine documentation in good condition. Travel paths: X 500 mm Y 400 mm Z 330 mm Gijdjv Dab Djpfx Aaden Table: 400 mm X 700 mm Spindle mount: ISO 40 Spindle speeds: 20-3000 rpm Rapid traverse: X / Y / Z. For further data, see data sheet.

Condition: good (used), Year of construction: 1988, CNC milling machine Gisdpoich Ehofx Aadsn MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Condition: good (used), Year of construction: 1990, CNC Universal Milling Machine MAHO MH600-C Control MAHO 432 with universal clamping table . Gisdpeurcybofx Aadon Spindle holder : ISO 40 Travels : X 600 mm Y 400 mm Z 500 mm Spindle speeds up to 2 000 rpm with work area enclosure Machine documentation available . Machine from tool shop in good clean general condition Ready for demonstration under power .

Condition: good (used), Year of construction: 1993, CNC universal milling machine DMG MORI Type: MH 600 C Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Gedpfx Ajiihxheadsin Good general condition.

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Gjdpfx Aaer Igv Rodsin Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.

Condition: defective spare-parts repository (used), Year of construction: 1990, spare parts CNC milling machine DECKEL FP5CC/T year 1990 spare parts How. Control DIALOG 11 Switch cabinet Complete Milling spindle vertical and horizontal ISO 40 Universal rotary tilting table Tool magazine with changer Gisdpfx Aaefgvu Uedon Chip conveyors, motors, U.S.W. Please ask for request.

Condition: good (used), Year of construction: 1986, CNC universal milling machine Giodpfxedtdahj Aadsn DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Only spare parts Please ask what you need.

Condition: good (used), Year of construction: 1990, CNC milling machine Fab.TOS type: FGS40CNC Control Haidenhein TNC 355 BJ. 1990 Procedures: X1000mm Y500mm Z500mm Spindle retainer: ISO 50. Gijdpfjdtfhqex Aadjn

Condition: good (used), Year of construction: 1988, CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Gijdpfsbu Em Aex Aaden Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: good (used), Year of construction: 2003, Vertical milling machine, UNITECH, type: FSS 315-S7, year of manufacture 2003 with 3-axis digital display ACU-RITE Hydraulic tool clamping, synchronous milling device, coolant device. Travel paths: X 1000 mm Y 355 mm Z505 mm Table: 315 mm X 1250 mm. Spindle mount: ISO 50 Gjdpfx Aev A Traoadsin Spindle speeds: 28 - 2240 rpm Machine in good condition, machine documentation available. For further data, see data sheets.

Condition: good (used), Year of construction: 1986, Universal milling machine Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y Giedpfx Ajich Dvsadon and Z 0-250 mm/min Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Machine Docs Available Good condition Ready for demonstration .

Condition: good (used), Year of construction: 2006, Universal tool milling machine KNUHT type: WF 5 year 2006 with 3-axis digital indicator, stepless feeds, hydraulic tool clamping. Table size : 800 mm X 300 mm max. load 350 Kg. Travels : X/Y/Z 450/400/320 Spindle mounting : ISO 40 spindle speed : 63 - 3150rpm Stepless feeds : 5-1250mm/min rapid traverse .1800mm/min Giedpfx Aasichr Soden Space requirement : 1,7m X 1,7m X 1,9m Weight.ca.1800Kg. Machine docs available ,machine demonstration ready undercurrent .

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Spindle passage: 25 mm Gisdpfx Aajvmglzedsn Weight approx. 25 kg. Operating instructions available.

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine Godex Tiq Sspfx Aadoin ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3600120, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, mount diameter: 40 mm, total height: 2,200 mm, total width: 2,000 mm, total length: 2,500 mm, table width: 500 mm, table length: 900 mm, overall weight: 3,000 kg, INTOS SNGJ 50 Tool Milling Machine - Operating voltage: 400 V - Frequency: 50 Hz Giodjyizqhjpfx Aaden - Power supply: 12 kVA - Table with 10 T-slots - Tool holder: SK 40 The machine is equipped with a three-axis digital readout from HEIDENHAIN. FCA D-73235 Weilheim Teck – loaded onto truck

Condition: good (used), Year of construction: 2013, operating hours: 4,951 h, functionality: fully functional, machine/vehicle number: 1002823, travel distance X-axis: 1,020 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 240 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 3,500 mm, table width: 1,000 mm, table length: 1,400 mm, table height: 960 mm, table load: 200 kg, overall weight: 2,000 kg, operating hours of spindle: 2,803 h, DATRON M 10 PRO A CNC Milling Machine - Operating voltage: 3 x 400 V - Frequency: 50 Hz - Rated current: 16 A - Operating pressure: 7 - 10 bar - Travel (X-axis): 1020 mm Gedpoxxwxfsfx Aadjin - Travel (Y-axis): 830 mm - Travel (Z-axis): 240 mm - X and Y travel restricted by tool changer: 1020/720 mm - Gantry clearance: 200 mm - Bushing spacing: 100/100 - Table cutout (width/depth): 630/348 mm - Table width: 1000 mm - Table depth: 1400 mm - Table height: 960 mm - Max. table load: 200 kg - Distance to outer edge: 175/148 mm - Indicated machine hours: 4951 h - Spindle running hours: 2803 h The machine is equipped with a tool presetting device from SCHUNK, type TRIBOS. Includes various holders and a vacuum pump. FCA D-73235 Weilheim Teck – loaded on truck

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully operational, used primarily for light machining such as aluminum. Notably, each of the two NC tables allows for workpiece clamping up to Ø1,100 mm (see drawing). A fixed milling table can also be mounted. High-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Operating hours: 50,236 Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions (2 chains) NC rotary tables (2 units) Type: SKH-NC 7/T Table diameter: Ø 630 mm Max load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm × 3,700 mm × 3,200 mm Weight: approx. 22,000 kg Equipment includes: 50 bar high-pressure coolant system, band filter, Heidenhain RCN 729 measuring system, Renishaw OMP 60 3D probe, electronic handwheel, 2x Visiport (viewing windows), chip conveyor. Tool holders are not included in the offer, but may be provided at additional cost. Transport and loading can be organized throughout Europe for an additional fee upon request. All prices are subject to VAT. Inspection by appointment is possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale Gijdpfx Asyi Er Asadjn BUYING & SELLING OF PRODUCTION AND METALWORKING MACHINES, AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Condition: new, - 2 pneumatic clamps - cooling - Material stop Giodpfx Aegg N Tasadon - documentation - 400V

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Gjdpfx Aajyi A Tdsdoin Storage location: Nattheim

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW Godpfx Ajx Ndbqoadjin feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the Giedpfx Ajwth Sbsaden scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2018, x-travel 762 mm y-travel 508 mm z-travel 508 mm control Haas Gisdpfx Aasygm Tpjdsn

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control 840 D sl Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 130 / 87 Nm tool taper SK 40 DIN 69871 table surface area 630 x 500 mm max. table load 300 kg Swivel range 115 (-110 / +5) ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse X/Y/Z: 24 m/min feed speeds X/Y/Z: 10.000 mm/min total power requirement 32 kVA weight of the machine ca. 4,5 t Godpfx Aswntx Nsadsin dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis simultaneous - swivable rotary table - pneumatic clamping device (Preparation)